1. This Report Is Invalid Without the Official Logo of ANTAM

ANTAM TEST REPORT

REMARKS

1. This report is invalid without the official logo of ANTAM.

2. Report shall not be duplicated in full or part without the approval of ANTAM.

3. This report is null without the authorized signature of ANTAM.

4. Any amendment to this document is not allowed.

5. Any discrepancy on this report shall be reported to the ANTAM Secretariat within 15 days after the date of receiving.

6. The test report under normal circumstances is valid for the samples tested.

（Photo）

Power tiller manufacturer’s name and address:

Location of power tiller assembly:

Submitted for test by:

Selected for test by:

Method of selection:

Place of running-in:

Duration of running-in:

Repairs and adjustments made during running-in:

Number of sealing:

Location of sealing:

Location and date of test:

Code version:

Name and address of testing station:

1.0 SPECIFICATIONS OF THE POWER TILLER

1.1 Power Tiller

Type:

Make:

Model:

Serial number:

Year of manufacture:

1.2 Engine

Type:

Make:

Model:

Serial number:

Engine rated speed (recommended by manufacturer):

Power at rated speed, kW:

Net mass, kg:

1.3 Cylinder and Cylinder Head

Configuration (vertical or horizontal):

Bore/stroke, mm:

Capacity, cm3:

Compression ratio:

Type of combustion chamber:

1.4 Fuel System

Type of fuel:

Capacity of fuel tank, liters:

Type of fuel filter:

Manufacturer’s production setting of fuel injector (Valve opening pressure), kPa:

Injection timing:

Type of injection pump:

1.5 Governor

Type:

Governed range of engine speed, rpm:

Rated engine speed, rpm:

1.6 Air Cleaner

Type:

Location of air intake (in case of no pre-cleaner):

Oil sump capacity, L:

1.7 Exhaust

Type of silencer:

Location:

1.8 Oil sump capacity, L

1.9 Cooling System

Type:

Details of pump and fan, if available:

Coolant capacity, Liters:

1.10 Electrical System

Voltage:

Generator:

Output power, kW:

Details of headlights (number, Watt):

1.11 Power Transmission System

a) Gearbox:

1) Oil capacity, liters:

2) Number of gears:

i) Forward:

ii) Reverse:

3) Nominal traveling speed at rated engine speed:

Gear Number / Nominal traveling speed at rated engine speed (km/h)
Forward / L1
L2
L3
H1
H2
H3
Reverse / L1
H1

b) Type of main clutch:

c) Type of steering clutch:

1.12 Rotary Shaft

Location:

Number of splines:

Speed, rpm:

Diameter of shaft, mm:

Height above ground, mm:

Direction of rotation (viewed from driving end):

Rotary shaft speed at rated engine speed, rpm:

Power transmission system:

1) Sprocket and chain:

2) Any other:

Arrangement for fitting of tines on the shaft:

Number and type of tines:

1.13 Main Pulley

Type and number of belts:

Diameter of pulley, mm:

Location:

Reduction ratio (from engine to clutch):

Rotational speed at rated engine speed, rpm:

1.14 Hitch

Type:

Location:

Height above ground level, mm:

i) Maximum:

ii) Minimum:

1.15 Parking Brake

Type:

Method of operation:

1.16 Wheels

Types:

1) Make:

2) Number:

3) Size:

4) Type of tyre:

5) Ply rating:

6) Recommended inflation pressure, kPa:

i) For fieldwork:

ii) For transport:

7) Track width, mm:

8) Method of changing track width, range and number of steps:

9) Method of changing track width, if any, and range:

Steel wheel:

1) Track width, mm:

2) Type:

3) Size:

i) Diameter, mm:

ii) Width, mm:

4) Mass, kg:

1.17 Operator’s Seat

Type:

Type of suspension:

Range of adjustment (if any), mm:

1.18 Ballast Mass

Ballast Mass (kg)
Water / Cast Iron Weight on -Wheel
Optional ballast

1.19 Mass of Power Tiller (without driver but with lubricant, fuel and coolant full)

Ballast / Unballast
Total

1.20 Overall Dimensions

Conditions / Length*
(mm) / Width*
(mm) / Height*
(mm) / Ground Clearance
(mm)
With ballast
Without ballast
* Measure the outermost points

ANTAM TEST REPORT

2.0 TEST CONDITIONS AND TEST RESULTS

2.1 Engine Performance

Please report the data in Annex I

2.1.1 Power Test

Date and place of test:

Type of dynamometer used:

Fuel used:

1) Type:

2) Density at 15°C:

Engine oil used:

1) Type:

2) Grade:

Transmission oil used:

No load maximum engine speed, rpm:

Engine performance test data sheet and curves in Annex II and I

2.2 Drawbar Performance Test

Date and location of tests:

Type of track:

Height of drawbar point above ground:

Mass of power tiller without ballast, kg:

Type and size of tyres:

Tyre pressure, kPa:

Details of fuel used (fuel number and standard):

Test data

Test / Gear
Number
Used / Travel
Speed
(km/h) / Drawbar
Pull
(kN) / Drawbar
Power
(kW) / Wheel
Slip
(%) / Engine
Speed
(rpm) / Fuel Consumption / Atmospheric Conditions
kg/h / g/kWh / kWh/1 / Temperature (0C) / Pressure
(kPa) / Relative
Humidity
(%)
(1) / (2) / (3) / (4) / (5) / (6) / (7) / (8) / (9) / (10) / (11) / (12)
Maximum
Power test
(power tiller un-blasted)
i)
ii)
iii)

2.3 Turning Ability

Details of wheels:

1) Wheel track, mm:

2) Size of tyres:

3) Pressure of tyres, kPa:

Test data

Description / Minimum Turning Diameter
(mm) / Minimum Turning Space Diameter
(mm)
Right Hand Side (m) / Left Hand
Side (m) / Right
Hand Side (m) / Left Hand Side (m)
(1) / (2) / (3) / (4) / (5)
With Steering Clutch

2.4 Parking Brake Test

Power tiller mass, kg:

Degree of slope:
Observation / Parking Braking Device Facing up Slope / Parking Braking Device Facing Down Slope
(1) / (2) / (3)
Parking device control force (N)
Whether rolling of braking wheels noticed / Yes/No / Yes/No
Efficacy of brakes / Yes/No / Yes/No

2.5 Noise Measurement at Operator’s Ear Level

Brief Description of the Silencing System:

Background Noise Level, dB (A):

Sound Level Meter

1) Type:

2) Make:

3) Model:

Date of Test:

Atmospheric Conditions:

1) Temperature, 0C:

2) Pressure, kPa:

3) Relative humidity, %:

Test Data

No / Gear Used / Travelling Speed
(km/h) / Engine Speed (rpm) / Slip (%) / Drawbar Pull (kN) / Sound Level
dB (A)
(1) / (2) / (3) / (4) / (5) / (6) / (7)
1
2
3
4
5
6

3.0 REPAIRS AND ADJUSTMENTS DURING TEST

4.0 REMARKS

5.0 ANNEXES

(Note: Annex I. II. III. are developed in reference to IS 9935: 2002)

ANTAM TEST REPORT

Annex I Engine Performance Data

Test
Conditions / Test / Power
(kW) / Crank
Shaft
Torque
(N-m) / Engine
Speed
(rpm) / Fuel Consumption / Specific
Energy
(kWh/1) / Temperature, 0C / Atmospheric
Conditions
Hourly
(kg/h) / Specific
(g/kWh) / Fuel / Engine
oil / Intake
Air / Coolant / Temp
(0C) / Relative
Humidity
(%) / Pressure
(kPa)
(1) / (2) / (3) / (4) / (5) / (6) / (7) / (8) / (9) / (10) / (11) / (12) / (13) / (14) / (15)
Normal
Ambient
test / i)
Maximum power test
ii)
Power At
Rated Engine
speed
-do- / Varying
Engine
Speed at
Full
Load
i)
ii)
iii)
iv)
v)
vi)
-do- / Rated
Engine
Speed at
Varying
Load
i)
ii)
iii)
iv)
v)
vi)

ANTAM TEST REPORT

Annex II Curves of Engine Performance Test

ANTAM TEST REPORT

Annex III

FIVE HOURS TEST
Test
Conditions / Test / Power
(kW) / Crank
Shaft
Torque
(N-m) / Engine
Speed
(rpm) / Fuel Consumption / Specific
Energy
(kWh/1) / Temperature, 0C / Atmospheric Conditions
Hourly
(kg/h) / Specific
(g/kWh) / Fuel / Engine oil / Coolant / Temp
(0C) / Relative
Humidity
(%) / Pressure
kPa
(1) / (2) / (3) / (4) / (5) / (6) / (7) / (8) / (9) / (10) / (11) / (12) / (13) / (14)
-do- / Five
Hours
Engine
Rating
Test
a) At
load
corresponding
to 80% of maximum
power
(4 hour)
i)
ii)
iii)
etc
At load
Corresponding
To maximum
Power
i)
ii)
iii)