1.EMSPI: energy efficiency for a sustainable and competitive printing industry

Deliverable D4.1c

Energy Management Specifications

(Full Model Vs. Basic Model)

EMSPI: Energy Management Standardization in Printing Industry

Author:Ing. / Tristán Mas / Factor CO2, Spain

Editing: Ing. / Luis Galiana / Factor CO2, Spain

Design: Dienstencentrum B.V./ Amstelveen, The Netherlands

Production:EMSPI project/ Valencia, Spain

Version: 11December 2015, v1.0-EN

EMSPI is a European projectthat aimsto promote actions for increase the energy efficiency of SME’s in the European Printing Industry, by promoting the implementation of an Energy Management System, based on the global standard ISO 50001.This project is funded by the Intelligent Energy Europe Programme, code IEE / 13/810 / S12.674880. The project partners within this program are:

The author does not assume any liability for timeliness, correctness, completeness or quality of the provided information. Liability claims against the author due to material or immaterial damage caused by the use or disuse of the provided information and / or by the use of incorrect and incomplete information are generally excluded

© 2015 EMSPIproject, IEE / 13/810 / S12.674880

No part of this document may be reproduced in any form without the express written authori-sation of AIDO and the organisation of the author.

TABLE OF CONTENT

BASIC MODEL VS. FULL MODEL

1.1Options

1.2EnMS Manual

1.3Procedures and registries

1.4EnMS Description

BASIC MODEL VS. FULL MODEL

1.1Options

The organizations interested in implementing an Energy Management System (EnMS) are able to choose one of the following options:

  • “Basic”:
    Designed as a first step in EnMS. For organizations that cannot develop all the requirements of the ISO 50001 standard.
  • “Full”:
    Leading to a complete implementation of the EnMS, assuming all the requirements of the ISO 50001 standard. For highly committed organizations.

1.2EnMS Manual

The manual is a reference document, easy to read and easy to understand. The content of the manual covers all the subjects of the EnMS. The manual includes examples, comments, figures, links and references.

Provides detailed information regarding the PDCA (PLAN-DO-CHECK-ACT) approach – also known as Deming Cycle – to achieve continuous improvement in energy performance.

“Basic” versión:

The basic implementation is specially focused in the “PLAN” and “DO” phases of the Deming Cycle, which include the energy planning, implementation and operation tasks. These tasks are summarized in sections 2 and 3 of the Basic Version of the EnMS Manual document.

“Full” version:

The full implementation covers all four phases of the Deming Cycle. These phases are specified in sections 2, 3, 4 and 5 of the Full Version of the EnMS Manual document.

1.3Procedures and registries

Procedures:

Only available for the “Full” version. A procedure is used to describe in detail a specific and advanced task.

Registries:

Control documents for setting goals, writing record of implementations undertaken, and proposing improvements. Available in the basic version and the full version of the EnMS.

1.4EnMS Description

“Basic” versión:

The document is an editable template, therefore the company details can be added throughout the document.

Consists in a brief document containing all the information needed to handle the EnMS, except the registry forms, which are linked in the text.

“Full” version:

The document is an editable template, therefore the company details can be added throughout the document.

Consists in a brief document containing most of the information needed to handle the EnMS. The text links to the procedures (to add detailed description when it is needed) and to the registry forms.

More information

EMSPI

/

Spanish co-ordinator: AIDO Industrial Association of Optics, Colour and Imaging
/ Phone: +34 961318051

C/Nicolás Copérnico, 7-13 (Valencia Parque Tecnológico)

46980 Paterna, Valencia, Spain

Czech republic partner: ENVIROS s.r.o.

/ / Phone: +42 597 570154

Na Rovnosti 1

130 00 Praha 3, Czech Republic

Danish partner: Grafisk Arbejdsgiverforening (Graphic Association Denmark)

/ / Phone: +4563127000

Helgavej 26

5230 Odense M, Danmark

Dutch partner: Dienstencentrum B.V.
/ / Phone: +31205435688

Startbaan 10

1185 XR, Amstelveen, The Netherlands

German partner: Innowise GmbH

/ / Phone: +492033937640

BÜrgerstrasse 15

47057 Duisburg, Germany

Spanish partner: Factor CO2
/ / Phone: +34 902105560

Paseo de la Castellana 121 izq 5ºC

28046 Madrid, Spain

Energy Management System Manual