05 - Brakes/05 - Brakes, ABS/Electrical/SENSOR, Wheel Speed, Front/Removal
REMOVAL
1. / Access and remove front brake rotor.2. / Remove brake shield from knuckle.
3. / Disconnect vehicle wiring harness (1) from wheel speed sensor connector.
4. / Unclip wheel speed sensor connector from bracket (2) on frame rail.
Remove wheel speed sensor grommet (2) from flex hose bracket (1) on frame rail.
6. / Remove screw (3) fastening wheel speed sensor routing bracket (2) to knuckle.
CAUTION: / Prior to removal, clean area around sensor head to help prevent contaminants from entering bearing when sensor head is removed.
7. / Remove screw (1) fastening speed sensor (2) head to hub and bearing (3).
8. / Remove wheel speed sensor from hub and bearing.
------
05 - Brakes/05 - Brakes, ABS/Electrical/SENSOR, Wheel Speed, Front/Installation
INSTALLATION
1. / Apply bearing grease (supplied with part) to sensor head shaft and O-ring.CAUTION: / Ensure that sensor mounting surface on bearing is clean before sensor installation.
2. / Push wheel speed sensor (2) head into mounting hole in hub and bearing (3) and align mounting screw hole.
3. / Install NEW mounting screw (1). Tighten mounting screw to 6 N·m (55 in. lbs.).
4. / Attach wheel speed sensor routing bracket (2) to knuckle (1). Install and tighten screw (3) to 8 N·m (71 in. lbs.).
5. / Attach wheel speed sensor routing bracket (3) to mounting flange (2) on strut assembly. Install and tighten screw (1) to 10 N·m (89 in. lbs.).
Install wheel speed sensor grommet (2) into flex hose bracket (1) on frame rail.
7. / Connect vehicle wiring harness (1) to wheel speed sensor connector.
8. / Install brake shield on knuckle. Install and tighten three mounting screws to 8 N·m (71 in. lbs.).
9. / Install brake rotor as well as all components necessary to access it.
10. / Verify that wheel speed sensor cable is properly routed and not coming into contact with rotor or other moving parts.