Wilsons Engineering Plant List 2016
CNC Milling
1-off Doosan DNM350AX 5 axis machining centre
15kW High Torque
Table Size Ø350mm
BT40 40 Tool Magazine
Through Spindle High Pressure Coolant
Spindle Speed 0-12,000rpm
1-off DAEWOO MYNX 540 Vertical Machining Centre
15kW High Torque
Table Size 1200mm x 500mm
Travel X1020mm x Y510mm x Z625
BT40 30 Tool Magazine
Through Spindle High Pressure Coolant
Spindle Speed 0-8,000rpm
1-off Doosan DNM400 Vertical Machining Centre
15kW High Torque
Table Size 920 x 435mm
Travel X762mm x Y430mm x Z510
BT40 30 Tool Magazine
Through Spindle High Pressure Coolant
Spindle Speed 0-8,000rpm
1-off HAAS VF6D Vertical Machining Centre
15kW Vector Drive Spindle
Table Size 1626mm x 711mm
Travel X1626mm x Y813mm x Z762mm
BT40 24 Tool Magazine
Through Spindle High Pressure Coolant
Spindle Speed 0-7,500rpm
Full 4th axis with HAAS HRT160 & HRT310 Rotary Tables
Renishaw Inspection probe and software
2-off HAAS VF3 Vertical Machining Centres
20HP Spindle Vector Drive
20 Tool Change
Capacity 1016mm x 508mm x 635mm
Spindle Speed 0 to 7,500rpm
Full 4th axis with HAAS HRT160 & HRT310 Rotary Tables
CNC Milling cont’d
2-off HAAS Super Minimill Vertical Machining Centres
15HP Vector Drive Spindle
20 Tool Change
Capacity 508mm x 405mm x 356mm
Spindle Speed 0 to 10,500rpm
1-off HAAS TM1 Vertical Machining Centres
7.5HP Spindle
Capacity 762mm x 305mm x 406mm
Spindle Speed 0 to 10,500rpm
CNC Turning
1-off DOOSAN PUMA400MB Turning Centre
30kW High Torque Motor
15” CHUCK
Ø116.5mm Bore
Spindle Speed 0-2,000rpm
Swing Over Saddle 770mm
Max Turning Diameter 560m
Max Turning Length 978mm
12Station 7.5kw live tooling
1-off DOOSAN PUMA2600LM Turning Centre
22kW High Torque Motor
10” CHUCK
Ø76mm Bore
Spindle Speed 0-3,500rpm
Swing Over Saddle 780mm
Max Turning Diameter 376mm
Max Turning Length 1280mm
12Station 5.5kw live tooling
1-off DOOSAN PUMA240M Turning Centre
22kW High Torque Motor
8” CHUCK
Ø65mm Bore
Spindle Speed 0-4,500rpm
Max Turning Diameter 350mm
Max Turning Length 562mm
12Station 5.5kw live tooling
CNC Turning cont’d
1-off DOOSAN PUMA220LM Turning Centre
15kW High Torque Motor
6” CHUCK
Spindle Speed 0-5,000rpm
Swing Over Saddle 510mm
Max Turning Diameter 250mm
Max Turning Length 510mm
12Station live tooling
1-off Mazak Nexus 250 2 axis Turning Centre
26kW High Torque Motor
10” Chuck
Spindle Speed 0-4,000rpm
Max Turning Diameter 350mm
Ø3” bar capacity with magazine bar feed
Programmable tail stock
1-off HARRISON ALPHA 550 CNC Lathe
15HP 3gears 15-1800rpm
Swing: 830mm in gap, 554mm over bed, 370mm over cross slide
2000mm between
1-off HAAS TL1
CAD CAM
Solidworks/SolidCam – turning and milling
CMM
Aberlink AXIOM TOO CMM 640x900x500 with Aberlink software and offline programming and programming from model
DEA Mistral 1077 with PCDMIS
Registered Office:
Legacy House, Tower Road North, Warmley, Bristol BS30 8WR
Tel: 0117 947 4390 Fax: 0117 967 1872 e-mail:
Directors: C.J. Wilson G.R. WilsonRegistered in England no. 579838