VUH PeriOp HEO Order Printer Summary

6.15.10 by Tim Cox

Variables:

Main (Adult)

  1. VUH PeriOp is the MPAC Location VHR.
  2. VUH VHR contains BOTH the “Main” Holding Room and the “Main” Recovery Room (PACU).
  3. A patient is first Admitted to VHR, or if already an inpatient, transferred to VHR.
  4. Once in VHR the patient is then Admitted to VPMIS in a VOR location
  5. VOR location will affect BOTH demand and Order output. The VPIMS servers are mapped independent for specific VPIMS print output such as SBAR, however, this output should align with the appropriate demand or demand/order default as predetermined.
  6. Once in the VOR location the patient is transferred within VPMIS through the PeriOp stages (PreOp=Holding, or possibly PACU contingent upon situation; IntraOp=OR Room; PostOp=Recovery/PACU)

TVC (Adult)

  1. VUH PeriOp MPAC location TVOS is PeriOp TVC
  2. VUH TVOS contains BOTH a Holding Room and a Recovery Room (PACU).
  3. A patient is first admitted to TVOS, or if already and inpatient, transferred to TVOS
  4. Once in TVOS the patient is then Admitted to VPMIS in a VOR location.
  5. Once in the VOR location the patient is transferred within VPMIS through the PeriOp stages (PreOp=Holding, or possibly PACU contingent upon situation; IntraOp=OR Room; PostOp=Recovery/PACU)

MCE3 (Adult)

  1. VUH PeriOp is the MPAC location MCE3
  2. VUH MCE3 contains BOTH a Holding Room and a Recovery Room (PACU)
  3. A patient is first admitted to MCE3, or if already and inpatient, transferred to MCE3
  4. Once in MCE3 the patient is then Admitted to VPMIS in a VOR location.
  5. Once in the VOR location the patient is transferred within VPMIS through the PeriOp stages (PreOp=Holding, or possibly PACU contingent upon situation; IntraOp=OR Room; PostOp=Recovery/PACU)

Print Output:

Main

  1. The default Order printer for VHR is VRR.
  2. VOR defaults to VHR, therefore VRR is the default printer for BOTH VHR and VOR
  3. VRR is HD45
  4. HD45 is currently located just right of the MR desk in the Main PACU
  5. RR01-RR15 sends to HD45
  6. VH50-VH60 sends to HD45
  7. Additional HEO Order Printers in VHR:
  8. Main “Annex” sends to HAAL
  9. Holding Room HR13-HR25 and HR32-HR35 sends to HAAI which just right of MR desk in the Holding Room
  10. Holding Room HR26-HR31 (old SICU 3011 multi-bay room) sends to HCAD located on center counter top in that room
  11. Exceptions:
  12. VOR28 is the Bronchoscopy procedure suite located in the VOR surgery suites. It has a dedicated printer for BOTH demand and Orders.This sends to BRON28 in VHR but is physically located in VOR28. All other VOR printers sends to HD45 because the residual dust associated with print output. VOR29 is a shared room for BOTH surgeries and Bronchoscopy procedures, however, VOR29 sends to HD45 in the Main PACU.
  13. The Cardiology unit COBS is physically located in the Holding Room but is a separate VUH MPAC Location. HR24-HR25 and HR32-HR35 send to “their” combined demand and order printer HD38 located just right of the COBS desk within the central nurse station of Main Holding.

TVC

  1. The default Order printer for TVC is TVOS
  2. TVOS is HABO
  3. HABO is currently located just left of the MR desk within the Recovery Room (most interior) section of TVC
  4. TVOS TCRR Recovery rooms TVOS01-TVOS06 send to HABO
  5. TVOS VOR TCOR rooms send to HABO
  6. TVOS TCHR Holding Rooms HR01-HR12 send to HF7A located exterior to the Recovery area nearest the “double doors” to the left of the entrance to the Recovery Room.

MCE3

  1. The default Order printer for MCE3 is MEHR
  2. MEHR is HDC5
  3. HDC5 is located behind the MR desk in the Holding Room nurse station immediately outside of the operative suite entrance.
  4. All orders print to HDC5 for the Surgery Suites, Recovery Room, and Holding Room in MCE3