S1-020H_A12-07-07
Page 122 of 215
Page 1 of 215
USE WITH 2004 STANDARD PLANS ONLY.
Amendments to the July 1999 Standard Specifications.
Use in projects with hot mix asphalt. (Inserted by boilerplate by DES-OE.)
DO NOT EDIT.
AMENDMENTS TO JULY 1999 STANDARD SPECIFICATIONS
UPDATED DECEMBER 7, 2007
SECTION 0: GLOBAL REVISIONS
Issue Date: July 31, 2007
Global revisions are changes to contract documents not specific to a section of the Standard Specifications.
• In each contract document at each occurrence:
1. Except where existing asphalt concrete is described, replace "asphalt concrete" with "hot mix asphalt"
2. Except where existing AC is described, replace "AC" with "HMA" where AC means asphalt concrete
SECTION1: DEFINITIONS AND TERMS
Issue Date: October 19, 2007
Section11.01, "General," of the Standard Specifications is amended by adding the following:
• The Department is gradually changing the style and language of the specifications. The new style and language includes:
1. Use of:
1.1. Imperative mood
1.2. Introductory modifiers
1.3. Conditional clauses
2. Elimination of:
2.1. Language variations
2.2. Definitions for industry-standard terms
2.3. Redundant specifications
2.4. Needless cross-references
• The use of this new style does not change the meaning of a specification not yet using this style.
• The specifications are written to the Bidder before award and the Contractor after. Before award, interpret sentences written in the imperative mood as starting with "The Bidder must" and interpret "you" as "the Bidder" and "your" as "the Bidder's." After award, interpret sentences written in the imperative mood as starting with "The Contractor must" and interpret "you" as "the Contractor" and "your" as "the Contractor's."
• Unless an object or activity is specified to be less than the total, the quantity or amount is all of the object or activity.
• All items in a list apply unless the items are specified as choices.
• Interpret terms as defined in the Contract documents. A term not defined in the Contract documents has the meaning defined in Means Illustrated Construction Dictionary, Condensed Version, Second Edition.
The 1st table in Section 1-1.02, "Abbreviations," of the Standard Specifications is amended by adding:
SSPC / The Society for Protective CoatingsSection1, "Definitions and Terms," of the Standard Specifications is amended by adding the following sections:
1-1.082 BUSINESS DAY
• Day on the calendar except Saturday or holiday.
11.084 CALIFORNIA Manual on Uniform Traffic Control Devices
• The California Manual on Uniform Traffic Control Devices for Streets and Highways (California MUTCD) is issued by the Department of Transportation and is the Federal Highway Administration's MUTCD 2003 Edition, as amended for use in California. Part 6 of the California MUTCD, "Temporary Traffic Control," supersedes the Department's Manual of Traffic Controls.
T08-17-07
1-1.125 DEDUCTION
• Amount of money permanently taken from progress payment and final payment. Deductions are cumulative and are not retentions under Pub Cont Code § 7107.
T08-17-07
1-1.205 FEDERAL-AID CONTRACT
• Contract that has a Federal-aid project number on the cover of the Notice to Contractors and Special Provisions.
T10-19-07
1-1.245 HOLIDAY
1. Every Sunday
2. January 1st, New Year's Day
3. 3rd Monday in January, Birthday of Martin Luther King, Jr.
4. February 12th, Lincoln's Birthday
5. 3rd Monday in February, Washington's Birthday
6. March 31st, Cesar Chavez Day
7. Last Monday in May, Memorial Day
8. July 4th, Independence Day
9. 1st Monday in September, Labor Day
10. 2nd Monday in October, Columbus Day
11. November 11th, Veterans Day
12. 4th Thursday in November, Thanksgiving Day
13. 4th Friday in November, Day after Thanksgiving Day
14. December 25th, Christmas Day
• If January 1st, February 12th, March 31st, July 4th, November 11th, or December 25th falls on a Sunday, the Monday following is a holiday. If November 11th falls on a Saturday, the preceding Friday is a holiday.
T08-17-07
1-1.475 WITHHOLD
• Money temporarily or permanently taken from progress payment. Withholds are cumulative and are not retentions under Pub Cont Code § 7107.
Section11.25, "Laboratory," of the Standard Specifications is amended to read:
11.25LABORATORY
• The Division of Engineering Services - Materials Engineering and Testing Services and Division of Engineering Services - Geotechnical Services of the Department of Transportation, or established laboratories of the various Districts of the Department, or other laboratories authorized by the Department to test materials and work involved in the contract. When a reference is made in the specifications to the "Transportation Laboratory," the reference shall mean Division of Engineering Services - Materials Engineering and Testing Services and Division of Engineering Services - Geotechnical Services, located at 5900Folsom Boulevard, Sacramento, CA 95819, Telephone (916)2277000.
Section11.255, "Legal Holidays," of the Standard Specifications is deleted.
Section11.265, "Manual of Traffic Controls," of the Standard Specifications is deleted.
Section11.275, "Office of Structure Design," of the Standard Specifications is amended to read:
11.275OfficeS of Structure Design
• The Offices of Structure Design of the Department of Transportation. When the specifications require working drawings to be submitted to the Offices of Structure Design, the drawings shall be submitted to: Offices of Structure Design, Documents Unit, Mail Station94/4I, 180130th Street, Sacramento, CA 95816, Telephone (916)2278252.
Section11.39, "State," of the Standard Specifications is amended to read:
11.39STATE
• The State of California, including its agencies, departments, or divisions, whose conduct or action is related to the work.
SECTION2: PROPOSAL REQUIREMENTS AND CONDITIONS
Issue Date: June 19, 2003
Section 21.03, "Examination of Plans, Specifications, Contract, and Site of Work," of the Standard Specifications is amended to read:
21.03 Examination of Plans, Specifications, Contract, and Site of Work
• The bidder shall examine carefully the site of the work contemplated, the plans and specifications, and the proposal and contract forms therefor. The submission of a bid shall be conclusive evidence that the bidder has investigated and is satisfied as to the general and local conditions to be encountered, as to the character, quality and scope of work to be performed, the quantities of materials to be furnished and as to the requirements of the proposal, plans, specifications and the contract.
• The submission of a bid shall also be conclusive evidence that the bidder is satisfied as to the character, quality and quantity of surface and subsurface materials or obstacles to be encountered insofar as this information was reasonably ascertainable from an inspection of the site and the records of exploratory work done by the Department as shown in the bid documents, as well as from the plans and specifications made a part of the contract.
• Where the Department has made investigations of site conditions including subsurface conditions in areas where work is to be performed under the contract, or in other areas, some of which may constitute possible local material sources, bidders or contractors may, upon written request, inspect the records of the Department as to those investigations subject to and upon the conditions hereinafter set forth.
• Where there has been prior construction by the Department or other public agencies within the project limits, records of the prior construction that are currently in the possession of the Department and which have been used by, or are known to, the designers and administrators of the project will be made available for inspection by bidders or contractors, upon written request, subject to the conditions hereinafter set forth. The records may include, but are not limited to, asbuilt drawings, design calculations, foundation and site studies, project reports and other data assembled in connection with the investigation, design, construction and maintenance of the prior projects.
• Inspection of the records of investigations and project records may be made at the office of the district in which the work is situated, or in the case of records of investigations related to structure work, at the Transportation Laboratory in Sacramento, California.
• When a log of test borings or other record of geotechnical data obtained by the Department's investigation of surface and subsurface conditions is included with the contract plans, it is furnished for the bidders' or Contractor's information and its use shall be subject to the conditions and limitations set forth in this Section 21.03.
• In some instances, information considered by the Department to be of possible interest to bidders or contractors has been compiled as "Materials Information." The use of the "Materials Information" shall be subject to the conditions and limitations set forth in this Section 21.03 and Section 62, "Local Materials."
• When cross sections are not included with the plans, but are available, bidders or contractors may inspect the cross sections and obtain copies for their use, at their expense.
• When cross sections are included with the contract plans, it is expressly understood and agreed that the cross sections do not constitute part of the contract, do not necessarily represent actual site conditions or show location, character, dimensions and details of work to be performed, and are included in the plans only for the convenience of bidders and their use is subject to the conditions and limitations set forth in this Section 21.03.
• When contour maps were used in the design of the project, the bidders may inspect those maps, and if available, they may obtain copies for their use.
• The availability or use of information described in this Section 21.03 is not to be construed in any way as a waiver of the provisions of the first paragraph in this Section 21.03 and bidders and contractors are cautioned to make independent investigations and examinations as they deem necessary to be satisfied as to conditions to be encountered in the performance of the work and, with respect to possible local material sources, the quality and quantity of material available from the property and the type and extent of processing that may be required in order to produce material conforming to the requirements of the specifications.
• The Department assumes no responsibility for conclusions or interpretations made by a bidder or contractor based on the information or data made available by the Department. The Department does not assume responsibility for representation made by its officers or agents before the execution of the contract concerning surface or subsurface conditions, unless that representation is expressly stated in the contract.
• No conclusions or interpretations made by a bidder or contractor from the information and data made available by the Department will relieve a bidder or contractor from properly fulfilling the terms of the contract.
SECTION3: AWARD AND EXECUTION OF CONTRACT
Issue Date: August 17, 2007
Section3, "Award and Execution of Contract," of the Standard Specifications is amended by adding the following section after Section31.02, "Contract Bonds":
31.025 INSURANCE POLICIES
• The successful bidder shall submit:
1. Copy of its commercial general liability policy and its excess policy or binder until such time as a policy is available, including the declarations page, applicable endorsements, riders, and other modifications in effect at the time of contract execution. Standard ISO form No.CG0001 or similar exclusions are allowed if not inconsistent with Section71.12, "Indemnification and Insurance." Allowance of additional exclusions is at the discretion of the Department.
2. Certificate of insurance showing all other required coverages. Certificates of insurance, as evidence of required insurance for the auto liability and any other required policy, shall set forth deductible amounts applicable to each policy and all exclusions that are added by endorsement to each policy. The evidence of insurance shall provide that no cancellation, lapse, or reduction of coverage will occur without 10 days prior written notice to the Department.
3. A declaration under the penalty of perjury by a certified public accountant certifying the accountant has applied Generally Accepted Accounting Principles (GAAP) guidelines confirming the successful bidder has sufficient funds and resources to cover any selfinsured retentions if the selfinsured retention is $50000 or higher.
• If the successful bidder uses any form of selfinsurance for workers compensation in lieu of an insurance policy, it shall submit a certificate of consent to selfinsure in accordance with the provisions of Section3700 of the Labor Code.
Section 31.03, "Execution of Contract," of the Standard Specifications is amended to read:
31.03 EXECUTION OF CONTRACT
• The contract shall be signed by the successful bidder and returned, together with the contract bonds and the documents identified in Section31.025, "Insurance Policies," within 10business days of receiving the contract for execution.
Section31.04, "Failure to Execute Contract," of the Standard Specifications is amended to read:
31.04FAILURE TO EXECUTE CONTRACT
• Failure of the lowest responsible bidder, the second lowest responsible bidder, or the third lowest responsible bidder to execute the contract as required in Section 31.03, "Execution of Contract," within 10business days of receiving the contract for execution shall be just cause for the forfeiture of the proposal guaranty. The successful bidder may file with the Department a written notice, signed by the bidder or the bidder's authorized representative, specifying that the bidder will refuse to execute the contract if it is presented. The filing of this notice shall have the same force and effect as the failure of the bidder to execute the contract and furnish acceptable bonds within the time specified.
Section 3-1.05, "Return of Proposal Guaranties," of the Standard Specifications is amended to read:
T08-17-07
3-1.05 RETURN OF PROPOSAL GUARANTIES
• The Department keeps the proposal guaranties of the 1st, 2nd and 3rd lowest responsible bidders until the contract has been executed. The other bidders' guaranties, other than bidders' bonds, are returned upon determination of the 1st, 2nd, and 3rd apparent lowest bidders, and their bidders' bonds are of no further effect.
SECTION 4: SCOPE OF WORK
Issue Date: August 17, 2007
Section 4-1.01, "Intent of Plans and Specifications," of the Standard Specifications is amended by adding the following:
T08-17-07
• Nothing in the specifications voids the Contractor's public safety responsibilities.
SECTION5: CONTROL OF WORK
Issue Date: October 19, 2007
Section 5, "Control of Work," of the Standard Specifications is amended by adding the following sections:
T10-19-07
5-1.005 GENERAL