1WHAT’S INSIDE?

  • MXSP-BT01 Bluetooth speaker
  • USB to Mini-USB charging cable
  • Quick start guide

LOCATION OF CONTROLS

  1. led indicator(RED/ BLUE)
  2. multifunctional Button
  3. Built in mICrophone
  4. ReSET BUTTON
  5. CHARGING JACK (Mini USB)

GETTING STARTED2

TURNING THE MXSP-BT01 ON/OFF

1.In standby mode, press and hold the multifunctional button for 2-3 seconds until a beep tone is heard to turn the unit ON, the Indicator LED will flash blue 3 times.

2.To turn the unit OFF, press and hold the multifunctional button for 2-3 seconds until a beep tone is heard and the Indicator LED turns red. Don’t forget to turn off the Bluetooth feature on your phone or multimedia player.

PAIRING THE MXSP-BT01

3.Press and hold the multifunctionalbutton for about 5 seconds to pair, when MXSP-BT01 is off. The LED will flash red and blue. Your Bluetooth enabled device can scan and connect to “MXSP-BT01”

4.Enjoy music playing or phone calling with Maxell MXSP-BT01.

3SPEAKER OPERATIONS & SPECIFICATION

There areseveral functions for the speaker such as:

  • Answer call
  • End call
  • Re-dial
  • Microphone
  • Mute, etc...

For more details concerning the operation and specifications of the MXSP-BT01, please go to [ where you can download the full user manual and specifications.

Note: The specifications may change at any time without advance notice. Maxell reserve the rights for any modification of this product.

CAUTION AND CARE4

  • Do not burn or bury batteries.
  • Do not puncture or crush.
  • Do not disassemble.
  • Li-Polymer batteries must be recycled. Do not dispose of in the trash.
  • Use only chargers rated for Li-Polymerbattery. Be sure the charger’s voltage and current settings are correct for the battery pack being charged.
  • Charge batteries on a fireproof surface and away from flammable items or liquids.

5CAUTION AND CARE

  • Batteries should NEVER be left unattended while charging. Only adults should charge the batteries or give strict instructions to children regarding charging.
  • Follow the manufacturer’s instructions for charging the product and do not charge longer than recommended. Unplug the charger when the battery is fully charged or not in use.
  • The speaker is not magnetically shielded and may cause color distortion on the screen of some TVs or video monitors. To avoid this, you may need to move the unit further away from the TV or monitor if an unnatural color shifts or image distortion occurs.
  • Avoid operating your unit under direct sunlight or in hot, humid or dusty places.

CAUTION AND CARE6

  • Keep your unit away from heating appliances and sources of electrical noise such as lamps or motors.
  • Don’t try to disassemble the product.
  • Don’t let it fall down onto the floor or other hard surfaces. The internal circuit might get damaged.
  • Don’t scratch the surface with sharp things.
  • To prevent fire or shock hazard, disconnect your unit from the USB port of power source when cleaning.
  • The finish on the unit may be cleaned with a dust cloth and cared for as other furniture, be caution when cleaning and wiping the plastic parts.
  • If you observe any abnormal functioning of the product, STOPusing the product immediately.

For Maxell 2 year warranty information please see