Instruction Manual

for

Twin Heads Motion Sensing White/Color Solar Lights

Questions, problems, missing parts? Before returning to the store,

Call Customer Service

9 a.m. - 5 p.m., EST, Monday – Friday

THANK YOU

We appreciate the trust and confidence you have placed in INTELAMP through the purchase of this lighting system. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing INTELAMP!

Content

Table of Content...... 2 Setting before Using...... 4

Safety Information...... 2 Installation...... 5

Warranty...... 2 Care and Cleaning...... 5

Package Contents...... 2 Troubleshooting...... 6

Features...... 3 Company Info...... 6

Specifications...... 3

Safety Information

1. This product contains lithium iron phosphate batteries. The battery must be recycled or disposed of properly.

2. The LED light and solar panel are not allowed to be dipped into water or any other liquid. It is waterproof only when the lampshade is above water

2. Install the product correctly to avoid drop off.

Warranty

WHAT IS COVERED

This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product is found to be defective, the manufacturer's only obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer's discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alterations, neglect, or mishandling.

WHAT IS NOT COVERED

This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material or workmanship. This warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear.

Package Contents

No. / Parts / Qty. / No. / Parts / Qty.
1 / Lamp Body / 1 / 4 / Screws / 1
2 / Instruction Manual / 1 / 5 / Plastic Insertion / 1
3 / 3MPaste / 2

Features

1. Solar powered, energy saving, no wiring electricity, installation anywhere, and high safety. Charging in the daytime and turning on automatically in the dark. Changing to high brightness when people moving is detected, and turning to low brightness color model when people leave, perfect for working as general lighting and decorative lighting. Multiple work modes for choosing, 2 buttons for motion sensing and always on, easy to set.

2. Mono crystalline solar panel and Lithium iron phosphate battery built in, over 3 years lifetime.

3. Dual sensor technology to ensure real 180 degree detection with high performance.

4. Colorful lights adding based on high bright white, good user experience.

5. Multiple mounting styles, pasting, or screw fixing on walls, fences or poles in the outdoor.

6. Need install at good shine location with enough sun shining.

Specification

Solar Panel / 4.5V/90mA, polycrystalline / Battery / 3.2V/600mAH,LiFePO4
LED / 5050 4-in-1 LED, RGB/W, 12pcs, 150lm/w for white / Circuit / Patented, 2 specific IC
Weight / 120grams / Size / L 125*W95*T51 (mm)
Housing / ABS plastic, white/black;
Acrylic frost lens;
Frost silicon rubber switch cover;
Frost black button cover / Mounting / 1.double paste 3M;
2.cable tie bundling;
3. Screw fixing.
Switches / One power switch
Two mode switch / Brightness / Over 100 lm at high brightness

Charging and work time estimation:

3 hours’ fully sun shine could support 80 cycles motion sensing light on/off (30 seconds per cycle), or 6 hours of high brightness light on. Lifetime over 10,000 hours, work time expects to drop in the second half of lifetime.

Setting before Using

2 Kinds of Switches Introduction:

1. Power ON/OFF switch (rear side)

Turn to OFF during transportation or long time in stock to avoid battery discharge. Charging is available at OFF position.

Turn to ON to ready for light on (still need press any button to light on).

2. Work mode buttons: AUTO and ON (default was OFF).

First time using: put power switch to ON position, cover the solar panel or put in dark, press any button to light on. The light might not light on due to battery fully discharged, charge battery in the sun shine to make sure enough power.

Press / AUTO button / ON button
1st / Motion sensing and colorfulmode:
High brightness white light on at motion detection;
Colorful light on at standby (30 seconds after non-motion detection) / High brightness white light always on
2nd / Motion sensing and white mode:
High brightness white light on at motion detection;
Low brightness white light on at standby (30 seconds after non-motion detection) / Colorful light always ONat high
3rd / Motion sensing and OFF mode:
High brightness white light on at motion detection;
All lights OFF at standby (30 seconds after non-motion detection) / OFF
4th / OFF / Same as 1st press
5th / Same as 1st press
Remark / 1. Cover the solar panel when setting in the daylight
2. Motion sensing detection range is impacted by environment, regular range is 5 meters with 180 degree.
3. Can charge but not light on when power switch set to OFF.

Installation

1. Ensure to install the light to good sun shine location. Work time would be shorter if lack of sun shine.

2. Motion sensing is to detect moving people or animals, no detection for non-moving people. Horizontal detection is more sensitive than vertical detection. Cold or hot wind, lightning, and/or high temperature environment would impact detection effect. That is why to choose appropriate mounting location.(Such as not suggest to mount nearby hot air area)

3. Mounting height: better detection range is from 1 meter to 2.5 meters, adjustment is needed based on actual location.

4. Mounting styles: 3 options

A. Screw fixing on the wall;

B. Pasting with 3M double paste type on the wall, glass or board;

Care and Cleaning

1. Cover the solar panel in the daytime at setting, otherwise it does not work.

2. Turn off the power switch for no discharge at battery saving purpose.

3. Clean the solar panel for better charging with sun shine.

4. Turn off the power switch for long time not using. Charge every half year to keep battery active.

Troubleshooting

Problem / Possible Cause / Solution
The solar light does not turn on at night, or its nightly run time is shorter. / The battery is not fully charged. / Ensure the solar light is located in an area where it can receive the maximum amount of full, direct sunlight every day. If the solar light does not receive enough sunlight during daytime (e.g. due to cloudy or overcast weather conditions), the battery will be recharged on the next sunny day and resume normal operation. Keeping the solar panel clean is equally important to ensure the maximum charging performance.
Battery end of life / Change new battery
Not auto turn ON / Power switch OFF / Put power switch to ON and press any button to initiate it
Other light nearby solar panel / The light could be only light on in the dark area
Button does not work or wrong work mode / Program error / Turn off the power switch for 10 seconds then turn on to reset the program, ensure the battery have enough power.
Light on shortly after turn on / Low battery protection / It might be due to low battery protection. The issue would be solved by fully charging. It is not quality issue.

Intelamp Shenzhen Company

Address: No.9, Tianyang One road, Dongfang Ave, Bao An district, Shenzhen city

Customer Service Tel:400-8648-168

Fax: 86-755-29605466

WeChat:太阳能照明

Website: