The Latest Generation of "Tesla Photon Machine"
Tesla Photon Model 2000
User's Manual
Read me first!
Before you assemble your Tesla Photon Machine.
- Read this User's Guide cover
to cover, paying particular note
to safety issues.
- Assemble your Tesla Machine.
- Please do not call or email our
technical support if you have
not read your User's Manual.
WARRANTY NOTE: You must send in
your Warranty Card within 10 days of the date of purchase.
V 1.3 - Updated Sept. 12, 2003
User’s Reference Guide Contents
Safety, Care & Maintenance …..…………………………….… 2-3
Brief Description …………...……………………………………. 3
Quick Assembly ……………....…………………………….… 4-7
Disclaimer …….……………....…………………………….…... 7
Tesla’s Photon Machine Limited Warranty …...……………… 8-9
Commonly Asked Questions…….………………………….... 9-10
Safety, Care & Maintenance
Please follow these instructions very carefully.
WARNING: TO REDUCE RISK OF ELECTRICAL SHOCK DO NOT REMOVE COVERS OR BACKS. NO USER SERVICEABLE PARTS INSIDE. REFER TO AUTHORIZED SERVICE PERSONNEL.
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS MACHINE TO RAIN OR MOISTURE.
1. Read & Follow Instructions. All the safety and operating instructions should be
read before the product is operated and followed precisely.
2. Turn Power Switch Off. Make sure that the Timer / Power Switch is in the "Off"
position before you plug in the machine.
3. Care in Moving. Remember that the components of this machine are fragile, so
exercise extreme care when moving them. Always place the crown back in its protective cylinder when not firmly situated on top of the coil.
4. Cleaning. Unplug the machine from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a lightly damped cloth for cleaning.
5. Water and Moisture. Do not use this product near water, for example, near a bath tub, wash bowl, sink, or in a wet basement or near a swimming pool.
6. Transporting the Product. If shipping or transporting the product, pack it carefully in the original boxes.
- Ventilation. The product should not be enclosed in a confined space while operating
to prevent circulation of fresh air to the fans. Overheating and equipment failure may result. Do not block the circulation vents of this machine.
- Interference with Other Appliances. This equipment generates radio frequency
energy. If this equipment does cause harmful interference to electronic equipment like a radio, television or computer the user is encouraged to try to correct the interference by one or more of the following measures:
(a) Increase the distance (physical separation) between the Tesla Photon Machine and the electronic equipment .
(b) Connect the Tesla Photon Machine into an outlet on a circuit that’s different from the electronic equipment.
Tesla Photon Model 2000 - Brief Description
The Tesla’s Photon Machine is designed to generate high frequency high voltage light emitting frequency signatures. It produces heat, light and noise and yet harmlessly passes through human tissue. This machine possesses qualities unlike any other RF or EMF device. It is capable of producing complex wave forms with accompanying harmonic fields of energy.
Quick Assembly
The Tesla Photon Model 2000 arrives inside two corrugated boxes, containing three distinct components. You should take special care during the unpacking and assembly not to drop any of the components after you've removed them from their boxes.
We provide information on quickly assembling your Tesla Photon machine below. A more complete pictorial presentation is available online at:
- Unpack The Base -- This part of the machine generates the current that will be sent
to the coil above it. Do not plug the base into a power receptacle until the entire machine is fully assembled. At no time should you attempt to disassemble the base, as this is not only dangerous, but will void your warranty.
- Prepare the Coil. You will find a cross bar on one end of the coil (on the right end in the picture above), and a brass metal plate on the top of the other end (on the left end in the picture above). Make sure the coil is free of any debris. The plastic tube that supports the outer windings should be free of obstructions, except for the cross bar.
3. Screw coil into base. Set the coil upfront over
the center of the base. As you can see in the
picture at left, the crossbar is threaded and will
act as a nut as you turn it clockwise over the
threaded screw that sits in the center of the
base's top. When you finish this step, your unit
should look like the picture below. You have
only to seat the final component: the crown.
4. Prepare Crown. The crown is comprised of twelve gas tubes that form an outer circle around the center of the crown. To protect these gas tubes, the crown is shipped in a protective plastic/foam cylinder … GENTLY remove the crown from its cylinder, as shown in the picture below. Remember not to throw out any of the boxes, packing materials, or the cylinder. If you experience any problem and need to have the system repaired at some point, you will want to retain these so that you can repackage the system and ship it to us (or a designated support facility) for repair.
5. Seat the Crown. The crown sits on top of the coil. In the picture below, the right half of the photo shows the bottom of the crown. Note that there are two concentric "lips" into which the top of the coil will snugly fit. Also note that there is a metal copper connector between these concentric rings. This connector MUST make contact with the metal connector at the top of the coil (see the left side of the photo below) in order for your Tesla Photon Machine to work.
An easy way to get the placement correctly is to spot the rivet on the outside of the crown which holds the crown connector in place. Then, as you slide the crown over the coil, keep this rivet centered over the coil's connector (see picture at left). If you make the connection in this way, you will be assured of making clean contact.
The finished unit looks much like you see at the top of this Manual. At this point, you can plug your Tesla Photon Machine into a receptacle and test the unit. Upon turning the Timer / Power Switch on (to the right), the unit is immediately activated. You can hear the "crackling" sound of the current, running through the tubes, as see the tubes in the crown light up. You may also notice, through the venting in the base, that light eminates from here as well. If you do not see or hear these phenomena, please email us for assistance:
…
Disclaimer
Nothing in this User’s Guide is intended to encourage the use of this device in any unlicensed or unauthorized manner.
Plasma Light Frequency Generators, such as the Tesla’s Photon Machine, are to be used for investigational purposes only. Alpha Omega Labs makes no claims whatsoever of the suitability of this machine for any particular purpose, nor assumes responsibility for the application, employment, effect, whether short term or long term, resulting from the use of this machine.
Alpha Omega Labs does not make any medical claims, nor are its agents and resellers authorized to do so. Persons with medical problems are urged to consult a qualified health care practitioner in their own country.
Tesla’s Photon Machine Limited Warranty
Alpha Omega Labs warrants the Tesla Photon Model 2000 and all parts thereof, except as set forth below ONLY TO THE ORIGINAL PURCHASER to be free from defects and workman-ship from the date of the original purchase as shown below. (“The Warranty Period”)
PARTS: 1 yearLABOR: 90 days
If this machine is found defective, Alpha Omega Labs will repair or replace defective parts at no charge to the original owner. Such repair and replacement services shall be rendered by Alpha Omega Labs or the EXCLUSIVE AUTHORIZED REPRE-SENTATIVE, or it’s authorized repair service. If the customer has purchased an EXTENDED SERVICE AGREEMENT, all work will be performed as per the EXTENDED SERVICE AGREEMENT.
WHAT YOU MUST DO FOR WARRANTY SERVICE: Call Alpha Omega Labs at (242) 380-8068 to obtain information on the closest authorized service, or email us at . You will need to have your original bill of sale or a copy of bill to obtain service. If service is not available locally, pack the unit in its original box carefully and ship insured with a copy of your bill of sale to Alpha Omega Labs at P.O. Box 1200, Lake Charles, LA 70602 - USA.
NOT COVERED BY WARRANTY: If the Tesla Photon Machine is subjected to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty install-ation, lack of reasonable care, or if repaired by or serviced by anyone not authorized by Alpha Omega Labs, or if the model or serial number has been altered, tampered with, defaced or removed. Glass tube breakage after receipt of the Unit is not a warrantable item. Any damage that occurs during shipping, due to an act of God, or cosmetic damage, will be covered by Alpha Omega Labs through freight carrier insurance. Also failures due to power surges and or lightning. There are no other express warranties except as listed above.
ALPHA OMEGA LABS SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER DAMAGES, WHETHER DIRECT, INCIDENTAL, OR CONSEQUENTIAL RESULTING FROM THE USE OF THIS MACHINE, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.
FOR CUSTOMER USE AND RECORDS.
Purchase date:______Serial No.______Representative.______
Commonly Asked Questions
- What is the Tesla’s Photon Machine?
A light frequency generator driven by a tuned Tesla Coil that allows light therapy to penetrate within the body in the following ways for pain relief and pain management:
- Increase circulation and oxygen flow, while releasing toxins.
- Stimulate acupuncture points throughout the body, releasing any block-ages that may hinder the healing process, thereby facilitating realignment.
- Maintain balance in the bio-magnetic field around the body, thereby strengthening the immune system and making the body more resistant to disease.
- What is the difference between the Tesla Photon Machine and the Rife light emit-ting devices?
Some "Rife technology" --- (and we use the term loosely to describe the use of generated electromagnetic frequencies in a therapeutic setting, as there are no formal standards to really refine just what Rife technology really is) has been shown to be effective in the area of pain management and the healing arts. Yes, some Rife devices use light tubes are generally composed of a mixture of argon and neon in a single gas tube. This is often combined with a frequency generator used to pulse the light frequencies. The Tesla Photon Machine utilizes 12 gases that cover a full spectrum of light frequencies driven by a tuned Tesla Coil to help drive the frequencies in to the body.
- How is the Tesla Photon Machine used?
You simply sit or lay anywhere from one to four feet from the light emitting "crown" of the Tesla Photon Machine and activate the machine by turning the Timer / Power Switch to the right until it stops (about 15 degrees). Then relax while the crown is emitting light and EM frequencies. We recommend removing any metal jewelry (necklaces, watches, rings, etc…) and remove any metal objects from the area where treatment is to occur.
- What is the recommended usage per day?
We recommend a maximum of 2–4 minute treatments twice a day with a detox time of 4 to 6 hours between sessions. For maintenance purposes, many users simply elect to go with one session per day.
- How long can the Tesla Photon Machine be operated continuously?
This machine can be used numerous times daily but only at a maximum of 4 minute intervals. With a minimum of 15 minutes between treatments. Give yourself time to let the body respond and heal.
- Can you instantly feel the effects of the treatment?
Those who are extremely sensitive may feel the effects being generated from the machine. These people are the exception not the rule. It is not necessary to feel the effects but rather experience the healing powers.
- What are the risks associated with the use of the Tesla Photon Machine?
There are no known risks or side effects associated with the use of the Tesla Photon Machine.
- Besides using the Tesla Photon Machine what else would you recommend?
Drink water before and after treatment we believe that control of the body chemistry is critical to eliminating a disease and also to keep it from returning at a later date. It is important to implement a detoxification and basic nutritional program for your overall health. Common "side effects" of not resting and/or drinking plenty of water between treatments is mild headache and swelling of the lymph glands --- which lymph glands depends on the individual.
- Is their a set number of treatments that fit all subjects?
No, you have to take into account that we are all different and therefore have different response rates. We have found that a minimum of 1-2 minutes twice daily or a maximum of 3-4 minutes twice daily is more than sufficient.
1