Suncombe Tank and Vessel Questionnaire

Suncombe Tank and Vessel Questionnaire

In order to assist us in evaluation of your requirements, please complete as much as possible of the following form. We would also appreciate if you could send sketches of your requirement to: - E-mail:- .

Your Details
First Name: (Required)
Last Name: (Required)
Job Title:
Phone: (Required)
Fax:
Email: (Required)
Company: (Required)
Address:
Line 2:
Line 3:
Town/City:
County/State:
Postcode/Zip:
Country:
Product Questions
Usage (storage, mixing, buffer, preparation, other (please specify)):
State the product/s:
State specific gravity (if known):
State viscosity (if known):
State any solids content (if so what type of solids):
Tank/Vessel Design Questions
Capacity:
Quantity:
Tank/Vessel Geometry (vertical cylindrical, horizontal cylindrical, rectangular):
Tank/Vessel Top End (torispherical dished, hemispherical, conical, flat welded, flanged, open):
Tank/Vessel Bottom End (torispherical dished, hemispherical, conical, flat welded, flanged):
Preferred dimensions (if known):
Mounting (Static on legs, Static on skirt, Static sloped bottom for concrete base, Static on load cells, Static on hanging supports, Mobile on Castors, Mobile on pallet base
Mobile on equipment skid, Other (please specify))
Pressure rating (vacuum, pressure, atmospheric). If pressure please specify minimum and maximum working pressures:
Pressure Design Code (if known):
Temperature rating. Please specify minimum and maximum working temperatures:
Temperature transfer jacket required (Non-jacketed, Jacket for Steam, Pressurised jacket for liquid, Non-pressurised Jacket for liquid, Limpet coil, Electrical heating)
Insulation and cladding required (if known specify thickness and type):
Material wetted parts (Stainless steel (304, 316, 316L), duplex or Hastelloy):
State wetted parts polish or surface finish (examples: 2B, satin polished, 0.9 raµm, 0.5 raµm etc.):
Material non-wetted parts (Stainless steel (304, 316):
State non-wetted parts polish or surface finish (examples: 2B, satin polished, 1.2 raµm etc.):
Do you require electropolishing?
Do you require passivation?
Where is the equipment to be sited? What is the headroom and any ingress limitations
Nozzles and Equipment
Nozzle 1 (please specify top, bottom, side, fitting, usage, equipment, instrument)
Nozzle 2 (please specify top, bottom, side, fitting, usage, equipment, instrument)
Nozzle 3 (please specify top, bottom, side, fitting, usage, equipment, instrument)
Nozzle 4 (please specify top, bottom, side, fitting, usage, equipment, instrument)
Nozzle 5 (please specify top, bottom, side, fitting, usage, equipment, instrument)
Nozzle 6 (please specify top, bottom, side, fitting, usage, equipment, instrument)
Nozzle 7 (please specify top, bottom, side, fitting, usage, equipment, instrument)
Nozzle 8 (please specify top, bottom, side, fitting, usage, equipment, instrument)
Nozzle 9 (please specify top, bottom, side, fitting, usage, equipment, instrument)
Nozzle 10 (please specify top, bottom, side, fitting, usage, equipment, instrument)
Nozzle 11 (please specify top, bottom, side, fitting, usage, equipment, instrument)
Nozzle 12 (please specify top, bottom, side, fitting, usage, equipment, instrument)
Mixing Questions
Do you require mixing (Yes/No (if No skip this section))?
Degree of Mixing (examples: gentle, moderate, vigorous)?
Type of mixing (examples: Blending miscible liquids, Suspending solids, Dissolving, Powder Incorporation, Heat Transfer, Dispersing immiscible liquids, Homogenising, Reacting)?
What does the mixer need to achieve (examples: homogeneous solution, homogeneous temperature profile, etc.)?
Do you have a mixer type preference (examples: magnetically coupled bottom, Magnetically coupled top, bottom entry, top entry sealed, top entry on bracket, other)?
Cleaning Questions
Does Tank/Vessel need to be prepared for Cleaning In Place?
Do you require a combined Cleaning In Place system on the vessel skid?
Does Tank/Vessel need to be prepared for Sterilising In Place (SIP)?
Automation Questions
Do you want automation on the tank/vessel (if so please describe)?
Level of automation? (examples: manual, semi-automatic, automatic, DCS)
If automatic state type and preferred supplier (PLC/SCADA/Siemens/Allen Bradley)
Environment/Utilities Questions
Is it necessary to comply with any special regulations - if so, please specify:
Will the system be "stand-alone" or require communication with other systems:
Zone classification of area where CIP will be located:
Describe your requirement (please continue on another sheet if needed and include a sketch)

Suncombe Ltd

Jade House Lockfield Avenue Brimsdown

Enfield Middlesex EN3 7JY UK

Tel +44(0) 208-443-3454 Fax +44(0) 208-443-3969

E-Mail: Web: www.suncombe.com