VIP - Quick Reference Card

3 / Use VIP Access with Cisco AnyConnect VPN

You will use Cisco AnyConnect to login to VPN. You must enter a VIP Access Security Code. Be sure that you have the VIP Access application open when you try to login to VPN.

Step 1. Verify if you have the Cisco AnyConnect VPN client installed.

Go to Start button, All Programs, Cisco, Cisco AnyConnect Secure Mobility Client. If you see the button, it is already installed. If not, refer to the Cisco AnyConnect Guide document for instructions on installing it.

Step 2. Start the Cisco AnyConnect client.

There are 2 methods for starting the Cisco AnyConnect client:

Method 1: Launch the client after you have started your PC and logged into Windows.

Go to Start button, All Programs, Cisco, Cisco AnyConnect Secure Mobility Client (see picture above). Click the button to launch the client.

Method 2: Launch the client before you login to Windows. You may use this option if you need access to network drives or need to run scripts prior to Windows login. After you click Ctrl+Alt+Delete and then OK on the infogroup Network Policy screen, you will see the Network Login button in the lower right. Click the Network Login button to open the Cisco AnyConnect client.

You will now see the Cisco AnyConnect application window.

Step 3. Connect to the Infogroup network through VPN

The first time you use the Cisco AnyConnect client, you may have to enter the domain for the network you want to login to. You will type the name in the box. Next time you open Cisco AnyConnect, you will see this domain in the dropdown list. The domain name for the Infogroup VPN is “vpn.infogroup.com”.

Now click the Connect button to login to the VPN connection. You will see a login window.

Fill in your regular network login Username and Password. Then click the OK button. You will then see the Authentication Prompt window.

You must now enter your VIP Access Security Code into the Answer field. Remember, you will get the Security Code from the VIP Access application. You can use the copy button in VIP Access to copy the code, then paste it into the Answer field in Cisco AnyConnect. When you have pasted the code into the Answer field, click the Continue button.Note: The VIP Access Security Code resets every 30 seconds. You must enter it into the Answer field and click the Continue button before it expires!

The last step is to click the Accept button on the Cisco AnyConnect agreement window. You are done!