** WARNING ** WARNING ** WARNING ** WARNING **
This document is intended for informational purposes only.
Users are cautioned that California Department of Transportation (Department) does not assume any liability or responsibility based on these electronic files or for any defective or incomplete copying, exerpting, scanning, faxing or downloading of the contract documents. As always, for the official paper versions of the bidders packages and non-bidder packages, including addenda write to the California Department of Transportation, Plans and Bid Documents, Room 0200, P.O. Box 942874, Sacramento, CA 94272-0001, telephone (916) 654-4490 or fax (916) 654-7028. Office hours are 7:30 a.m. to 4:15 p.m. When ordering bidder or non-bidder packages it is important that you include a telephone number and fax number, P.O. Box and street address so that you can receive addenda.

STATE OF CALIFORNIA

DEPARTMENT OF TRANSPORTATION

______

NOTICE TO CONTRACTORS

AND

SPECIAL PROVISIONS

FOR CONSTRUCTION ON STATE HIGHWAY IN

SAN DIEGO COUNTY IN SAN DIEGO FROM 0.3 km NORTH OF MISSION BAY DRIVE OVERCROSSING TO 0.2 km SOUTH OF 5/52 SEPARATION

DISTRICT 11, ROUTE 5

______

For Use in Connection with Standard Specifications Dated JULY 1999, Standard Plans Dated JULY 1999, and Labor Surcharge and Equipment Rental Rates.

______

CONTRACT NO. 11-065204

11-SD-5-R38.8/R41.5

Federal Aid Project

ACIM-005-1(584)20E

Bids Open: April 11, 2002 / E-BID
Dated: March 11, 2002

*************************************************************************************************

IMPORTANT

SPECIAL NOTICES

*************************************************************************************************

Attention is directed to the "Notice to Contractors," and Sections 2-1.01, "General," and 2-1.012, "Proposal Guaranty," of the Special Provisions regarding electronic proposals and bid bonds on the Internet. This project is part of a pilot program to test the On-line Bidding System. The proposal for the project is on the Internet, and is to be completed and submitted electronically. Bid bonds are to be submitted through Surety 2000. Due to the complexities of using a pilot system, it is recommended that bidders register with the On-line Bidding System and submit the specified registration and statement substantially prior to the date and time specified.

The Special Provisions for Federal-aid projects (with and without DBE goals) have been revised to incorporate changes made by new regulations governing the DBE Program (49 CFR Part 26).

Sections 2 and 5 incorporate the changes. Bidders should read these sections to become familiar with them. Attention is directed to the following significant changes:

Section 2, "Disadvantaged Business Enterprise (DBE)" revises the counting of participation by DBE primes, and the counting of trucking performed by DBE firms. The section also revises the information that must be submitted to the Department in order to receive credit for trucking.

Section 2, "Submission of DBE Information" revises the information required to be submitted to the Department to receive credit toward the DBE goal. It also revises the criteria to demonstrate good faith efforts.

Section 5, "Subcontractor and DBE Records" revises the information required to be reported at the end of the project, and information related to trucking that must be submitted throughout the project.

Section 5, "DBE Certification Status" adds new reporting requirements related to DBE certification.

Section 5, "Subcontracting" describes the efforts that must be made in the event a DBE subcontractor is terminated or fails to complete its work for any reason.

Section 5, "Prompt Progress Payment to Subcontractors" requires prompt payment to all subcontractors.

Section 5, "Prompt Payment of Withheld Funds to Subcontractors" requires the prompt payment of retention to all subcontractors.

· Payment Bonds

Attention is directed to Section 5 of the Special Provisions, regarding contract bonds. The payment bond shall be in a sum not less than one hundred percent of the total amount payable by the terms of the contract.

· Federal minimum wage rates for this project are no longer included in the "Proposal and Contract" book. They will be available through the California Department of Transportation's Electronic Project Document Distribution Internet Web Site at http://hqidoc1.dot.ca.gov/. See Notice to Contractors.

· Attention is directed to Section1, "Specifications and Plans," of these special provisions for Amendments To July 1999 Standard Specifications. Amendments to the various sections of the Standard Specification have been consolidated into Section 1 and dated to reflect the most recent revision.

TABLE OF CONTENTS

NOTICE TO CONTRACTORS 1

COPY OF ENGINEER'S ESTIMATE 3

SPECIAL PROVISIONS 7

SECTION 1.SPECIFICATIONS AND PLANS 7

AMENDMENTS TO JULY 1999 STANDARD SPECIFICATIONS 7

SECTION 2.PROPOSAL REQUIREMENTS AND CONDITIONS 44

21.01GENERAL 44

2-1.012PROPOSAL GUARANTY 44

21.015FEDERAL LOBBYING RESTRICTIONS 45

21.02DISADVANTAGED BUSINESS ENTERPRISE (DBE) 45

21.02ADBE GOAL FOR THIS PROJECT 47

21.02BSUBMISSION OF DBE INFORMATION 47

SECTION 3.AWARD AND EXECUTION OF CONTRACT 48

SECTION 4.BEGINNING OF WORK, TIME OF COMPLETION AND LIQUIDATED DAMAGES 48

SECTION 5.GENERAL 49

SECTION 51.MISCELLANEOUS 49

51.01PLANS AND WORKING DRAWINGS 49

51.011EXAMINATION OF PLANS, SPECIFICATIONS, CONTRACT, AND SITE OF WORK 49

51.012DIFFERING SITE CONDITIONS 49

5-1.015LABORATORY 49

51.017CONTRACT BONDS 49

51.019COST REDUCTION INCENTIVE 49

51.02LABOR NONDISCRIMINATION 50

51.03INTEREST ON PAYMENTS 50

51.031FINAL PAYMENT AND CLAIMS 50

51.04PUBLIC SAFETY 51

51.05(BLANK) 52

51.06REMOVAL OF ASBESTOS AND HAZARDOUS SUBSTANCES 52

51.07YEAR 2000 COMPLIANCE 52

51.075BUY AMERICA REQUIREMENTS 52

51.08SUBCONTRACTOR AND DBE RECORDS 52

51.083DBE CERTIFICATION STATUS 53

51.086PERFORMANCE OF DBE SUBCONTRACTORS AND SUPPLIERS 53

51.09SUBCONTRACTING 53

51.10PROMPT PROGRESS PAYMENT TO SUBCONTRACTORS 54

51.102PROMPT PAYMENT OF WITHHELD FUNDS TO SUBCONTRACTORS 54

51.11PARTNERING 54

51.12COMPENSATION ADJUSTMENTS FOR PRICE INDEX FLUCTUATIONS 55

51.13AREAS FOR CONTRACTOR'S USE 55

51.14PAYMENTS 56

51.15SOUND CONTROL REQUIREMENTS 56

5-1.16AERIALLY DEPOSITED LEAD 56

SECTION 6.(BLANK) 57

SECTION 7.(BLANK) 57

SECTION 8.MATERIALS 57

SECTION 8-1.MISCELLANEOUS 57

81.01SUBSTITUTION OF NONMETRIC MATERIALS AND PRODUCTS 57

81.02PREQUALIFIED AND TESTED SIGNING AND DELINEATION MATERIALS 63

81.03STATE-FURNISHED MATERIALS 68

81.04SLAG AGGREGATE 68

81.05ENGINEERING FABRICS 69

SECTION 8-2.CONCRETE 70

82.01PORTLAND CEMENT CONCRETE 70

82.02CEMENT AND WATER CONTENT 71

SECTION83.WELDING 71

83.01WELDING 71

General 71

Welding Quality Control 72

Payment 75

SECTION 9.(BLANK) 75

SECTION 10.CONSTRUCTION DETAILS 75

SECTION 10-1.GENERAL 75

101.00CONSTRUCTION PROJECT INFORMATION SIGNS 75

101.01ORDER OF WORK 76

101.02WATER POLLUTION CONTROL (STORM WATER POLLUTION PREVENTION PLAN) 77

STORM WATER POLLUTION PREVENTION PLAN PREPARATION, APPROVAL AND AMENDMENTS 78

COST BREAK-DOWN 79

SWPPP IMPLEMENTATION 81

MAINTENANCE 82

REPORTING REQUIREMENTS 82

WATER POLLUTION CONTROL TRAINING 82

PAYMENT 82

10-1.03 TEMPORARY EROSION CONTROL (BONDED FIBER MATRIX) 84

APPLICATION 84

MEASUREMENT AND PAYMENT 85

101.04TEMPORARY FIBER ROLL 85

MATERIALS 85

INSTALLATION 85

MEASUREMENT AND PAYMENT 85

101.05PRESERVATION OF PROPERTY 85

101.06TEMPORARY GRAVEL BAG 86

MATERIALS 86

INSTALLATION 86

MEASUREMENT AND PAYMENT 86

10-1.07TEMPORARY CONSTRUCTION ENTRANCE (PLATES) 86

101.08RELIEF FROM MAINTENANCE AND RESPONSIBILITY 87

101.09COOPERATION 87

101.10PROGRESS SCHEDULE (CRITICAL PATH METHOD) 87

101.11OBSTRUCTIONS 90

101.12MOBILIZATION 91

101.13CONSTRUCTION AREA TRAFFIC CONTROL DEVICES 91

101.14CONSTRUCTION AREA SIGNS 92

101.15MAINTAINING TRAFFIC 92

101.16CLOSURE REQUIREMENTS AND CONDITIONS 95

CLOSURE SCHEDULE 95

CONTINGENCY PLAN 96

LATE REOPENING OF CLOSURES 96

COMPENSATION 96

101.17CONSTRUCTION ZONE ENHANCED ENFORCEMENT 96

101.18TRAFFIC CONTROL SYSTEM FOR LANE CLOSURE 97

STATIONARY LANE CLOSURE 97

MOVING LANE CLOSURE 97

PAYMENT 98

101.19TEMPORARY PAVEMENT DELINEATION 98

GENERAL 98

TEMPORARY LANELINE AND CENTERLINE DELINEATION 99

TEMPORARY EDGELINE DELINEATION 99

TEMPORARY TRAFFIC STRIPE (PAINT) 100

TEMPORARY PAVEMENT MARKERS 100

MEASUREMENT AND PAYMENT 100

101.20PORTABLE CHANGEABLE MESSAGE SIGN 101

101.21TEMPORARY RAILING 101

101.22TRAFFIC PLASTIC DRUMS 101

101.23TEMPORARY CRASH CUSHION MODULE 102

101.24EXISTING HIGHWAY FACILITIES 103

ABANDON CULVERT 103

REMOVE METAL BEAM GUARD RAILING 104

REMOVE SIGN STRUCTURE 104

REMOVE PAVEMENT MARKER 104

REMOVE TRAFFIC STRIPE AND PAVEMENT MARKING 104

REMOVE DRAINAGE FACILITY 104

REMOVE ASPHALT CONCRETE DIKE 104

RELOCATE ROADSIDE SIGN 105

MODIFY SIGN STRUCTURE 105

REMOVE CONCRETE 105

REMOVE TREE 105

101.25CLEARING AND GRUBBING 105

101.26WATERING 106

101.27EARTHWORK 106

101.28CONTROLLED LOW STRENGTH MATERIAL 106

10-1.29MATERIAL CONTAINING AERIALLY DEPOSITED LEAD 107

LEAD COMPLIANCE PLAN 107

EXCAVATION AND TRANSPORTATION PLAN 107

DUST CONTROL 108

DISPOSAL 108

MEASUREMENT AND PAYMENT 108

101.30EXTEND IRRIGATION CROSSOVERS 109

101.31AGGREGATE BASE 109

101.32ASPHALT CONCRETE 109

101.33 CONCRETE PAVEMENT (WITH DOWELED TRANSVERSE WEAKENED PLANE JOINTS) 112

GENERAL 112

PREPAVING CONFERENCE 112

TEST STRIP 112

MATERIALS 113

SUBMITTALS 115

INSTALLING TIE BARS 115

DOWEL PLACEMENT 116

CORE DRILLING FOR DOWEL PLACEMENT ALIGNMENT ASSURANCE TESTING 116

LIQUID JOINT SEALANT INSTALLATION 117

CONSTRUCTING TRANSVERSE CONTACT JOINTS 117

CONSTRUCTING LONGITUDINAL ISOLATION JOINTS 117

MEASUREMENT AND PAYMENT 118

101.34CONCRETE STRUCTURES 118

101.35SIGN STRUCTURES 118

101.36ROADSIDE SIGNS 119

101.37REINFORCED CONCRETE PIPE 120

101.38CORRUGATED METAL PIPE 120

101.39OVERSIDE DRAIN 120

101.40SLOPE PROTECTION 120

101.41MISCELLANEOUS IRON AND STEEL 120

101.42DELINEATORS 120

101.43METAL BEAM GUARD RAILING 121

TERMINAL SYSTEM (TYPE SRT) 121

10-1.44CABLE RAILING 121

101.45THERMOPLASTIC TRAFFIC STRIPE 122

101.46PAINT TRAFFIC STRIPE 122

101.47PAVEMENT MARKERS 122

SECTION 102.HIGHWAY PLANTING AND IRRIGATION SYSTEMS 122

102.01GENERAL 122

COST BREAK-DOWN 122


102.02EXISTING HIGHWAY PLANTING 126

MAINTAIN EXISTING PLANTED AREAS 126

102.03EXISTING HIGHWAY IRRIGATION FACILITIES 126

LOCATE EXISTING CROSSOVERS AND CONDUITS 126

CHECK AND TEST EXISTING IRRIGATION FACILITIES 127

REMOVE EXISTING IRRIGATION FACILITIES 127

10-2.04HIGHWAY PLANTING 127

HIGHWAY PLANTING MATERIALS 127

ROADSIDE CLEARING 128

PESTICIDES 128

PLANTING 129

PLANT ESTABLISHMENT WORK 129

102.05IRRIGATION SYSTEMS 130

VALVE BOXES 130

ELECTRIC AUTOMATIC IRRIGATION COMPONENTS 130

EXISTING VALVE BOX COVER 131

IRRIGATION SYSTEMS FUNCTIONAL TEST 131

PIPE 131

SPRINKLERS 131

FINAL IRRIGATION SYSTEM CHECK 132

SECTION 103.SIGNALS, LIGHTING AND ELECTRICAL SYSTEMS 132

103.01DESCRIPTION 132

103.02COST BREAK-DOWN 132

103.03CONDUIT 132

103.04PULL BOXES 133

103.05CONDUCTORS AND WIRING 133

103.06SERVICE 133

103.07NUMBERING ELECTRICAL EQUIPMENT 133

103.08DETECTORS 133

103.09PHOTOELECTRIC CONTROLS 134

103.10SIGN LIGHTING FIXTURESINDUCTION 134

HOUSING 134

REFLECTOR 134

REFRACTOR 134

LAMP 134

POWER COUPLER 134

HIGH FREQUENCY GENERATOR 134

103.11REMOVING, REINSTALLING OR SALVAGING ELECTRICAL EQUIPMENT 135

103.12PAYMENT 135

SECTION 11.(BLANK) 135

SECTION 12.(BLANK) 135

SECTION 13.(BLANK) 135

SECTION14 FEDERAL REQUIREMENTS FOR FEDERAL-AID CONSTRUCTION PROJECTS 136

FEDERAL REQUIREMENT TRAINING SPECIAL PROVISIONS 155

STANDARD PLANS LIST

The Standard Plan sheets applicable to this contract include, but are not limited to those indicated below. The Revised Standard Plans (RSP) and New Standard Plans (NSP) which apply to this contract are included as individual sheets of the project plans.

A10A / Abbreviations
A10B / Symbols
A20A / Pavement Markers and Traffic Lines, Typical Details
A20B / Pavement Markers and Traffic Lines, Typical Details
A20C / Pavement Markers and Traffic Lines, Typical Details
A20D / Pavement Markers and Traffic Lines, Typical Details
RSP A35A / Portland Cement Concrete Pavement (Undoweled Transverse Joints)
RSP A35B / Portland Cement Concrete Pavement (Doweled Transverse Joints)
A35C / Portland Cement Concrete Pavement Joint and End Anchor Details
A62A / Excavation and Backfill - Miscellaneous Details
A62D / Excavation and Backfill - Concrete Pipe Culverts
RSP A62DA / Excavation and Backfill - Concrete Pipe Culverts
A62E / Excavation and Backfill - Cast-In-Place Reinforced Concrete Box and Arch Culverts
A73B / Markers
RSP A73C / Delineators, Channelizers and Barricades
A77A / Metal Beam Guard Railing – Typical Wood Post With Wood Block
A77B / Metal Beam Guard Railing - Standard Hardware
A77C / Metal Beam Guard Railing – Wood Post and Wood Block Details
A77D / Metal Beam Guard Railing – Typical Layouts
A77E / Metal Beam Guard Railing – Typical Layouts
A77F / Metal Beam Guard Railing – Typical Embankment Widening for End Treatments
A77FA / Metal Beam Guard Railing – Typical Line Post Installation
RSP A77G / Metal Beam Guard Railing – End Treatment, Terminal Anchor Assembly (Type SFT)
A77H / Metal Beam Guard Railing - Anchor Cable and Anchor Plate Details
A77IA / Metal Beam Guard Railing – End Treatment, Buried Post Anchor
RSP A77L / Metal Beam Guard Railing and Single Faced Barrier Railing Terminal System - End Treatments
A81A / Crash Cushion, Sand Filled (Unidirectional)
A81B / Crash Cushion, Sand Filled (Unidirectional)
A87 / Curbs, Dikes and Driveways
RSP D72 / Drainage Inlets
D73 / Drainage Inlets
D74A / Drainage Inlets
D74B / Drainage Inlets
D74C / Drainage Inlet Details
D75A / Pipe Inlets
D75B / Pipe Inlets
D75C / Pipe Inlets
D77A / Grate Details
D79 / Precast Reinforced Concrete Pipe - Direct Design Method
D87A / Corrugated Metal Pipe Downdrain Details
D87D / Overside Drains
D88 / Construction Loads On Culverts
RSP D89 / Pipe Headwalls
D94A / Metal and Plastic Flared End Sections
D94B / Concrete Flared End Sections
D97A / Corrugated Metal Pipe Coupling Details No. 1 - Annular Coupling Band Bar and Strap and Angle Connectors
D97E / Corrugated Metal Pipe Coupling Details No. 5 - Standard Joint
D97H / Reinforced Concrete Pipe or NonReinforced Concrete Pipe - Standard and Positive Joints
D98A / Slotted Corrugated Steel Pipe Drain Details
H1 / Planting and Irrigation - Abbreviations
H2 / Planting and Irrigation - Symbols
H3 / Planting and Irrigation Details
H4 / Planting and Irrigation Details
H5 / Planting and Irrigation Details
H6 / Planting and Irrigation Details
H7 / Planting and Irrigation Details
H8 / Planting and Irrigation Details
T1A / Temporary Crash Cushion, Sand Filled (Unidirectional)
RSP T2 / Temporary Crash Cushion, Sand Filled (Shoulder Installations)
T3 / Temporary Railing (Type K)
T7 / Construction Project Funding Identification Signs
T10 / Traffic Control System for Lane Closure On Freeways and Expressways
T10A / Traffic Control System for Lane and Complete Closures On Freeways and Expressways
T14 / Traffic Control System for Ramp Closure
T15 / Traffic Control System for Moving Lane Closure On Multilane Highways
B11-47 / Cable Railing
RS1 / Roadside Signs, Typical Installation Details No. 1
RS2 / Roadside Signs - Wood Post, Typical Installation Details No. 2
RSP S1 / Overhead Signs - Truss, Instructions and Examples
RSP S2 / Overhead Signs - Truss, Single Post Type - Post Types II Thru VII
RSP S3 / Overhead Signs - Truss, Two Post Type - Post Types I-S Thru VII-S
RSP S8C / Overhead Signs - Truss, Sign Mounting Details, Laminated Panel - Type A
S9 / Overhead Signs - Walkway Details No. 1
S10 / Overhead Signs - Walkway Details No. 2
RSP S13 / Overhead Signs - Truss, Pile Foundation
S18B / Overhead Signs - Lightweight, Light Fixture Mounting Details
RSP S20A / Overhead Signs - Lightweight, Post Details
S40N / Overhead Signs- Tubular, Instructions and Examples
S40P / Overhead Signs - Tubular, Single Post Type, Layout and Pipe Selection
RSP S40Q / Overhead Signs - Tubular, Two Post Type, Layout and Pipe Selection
S40R / Overhead Signs - Tubular, Structural Frame Details No. 1
RSP S40S / Overhead Signs - Tubular, Structural Frame Details No. 2
RSP S40T / Overhead Signs - Tubular, Base Plate and Anchorage Details
RSP S40U / Overhead Signs - Tubular, Foundation Details
ES-1A / Signal, Lighting and Electrical Systems - Symbols and Abbreviations
ES-1B / Signal, Lighting and Electrical Systems - Symbols and Abbreviations
ES-2A / Signal, Lighting and Electrical Systems - Service Equipment
ES-2C / Signal, Lighting and Electrical Systems - Service Equipment Notes, Type III Series
ES-2E / Signal, Lighting and Electrical Systems - Service Equipment and Typical Wiring Diagram Type III-B Series
ES-5A / Signal, Lighting and Electrical Systems - Detectors
ES-5B / Signal, Lighting and Electrical Systems - Detectors
ES-5E / Signal, Lighting and Electrical Systems - Detectors
ES-6E / Lighting Standards - Types 30 and 31
RSP ES-6F / Lighting Standards - Type 30 and 31 Base Plate Details
ES-6K / Lighting Standards - Type 5 and Type 10, Overhead Sign Mounted
ES-7B / Signal and Lighting Standards - Type 1 Standards and Equipment Numbering
ES-7M / Signal and Lighting Standards - Details No. 1
ES-7N / Signal and Lighting Standards - Details No. 2
ES-8 / Signal, Lighting and Electrical Systems - Pull Box Details
ES-10 / Signal, Lighting and Electrical Systems - Isolux Diagrams
ES-11 / Signal, Lighting and Electrical Systems - Foundation Installations
ES-13A / Signal, Lighting and Electrical Systems - Splicing Details
ES-13B / Signal, Lighting and Electrical Systems - Wiring Details and Fuse Ratings
ES-15A / Sign Illumination - Mercury Vapor Sign Illumination Equipment
ES-15C / Sign Illumination - Sign Illumination Equipment
ES-15D / Sign Illumination - Sign Illumination Control

Contract No. 11-065204