Welding procedure specifications (WPS)
Manufacturer: / Gold cup LindeWPS no.: / 02 – 111 P BW PA 3 / WPQR no.: / -
Welding method(s): / 111 / Designation of the basic material (group): / 1.1, S 235
Way of metal transfer: / - / Thickness of the material (mm): / 3,0
Type of weld joint and type of weld: / BW / Outside diameter (mm): / -
Way of preparation and cleaning: / Filing, brushing / Welding position: / PA
Details of a weld preparation (sketch)*
Joint design / Weld run sequence/
Perform at least one weld connection
Welding details
Weld bead / Welding method / Dimension of the filler material / CurrentA / Voltage
V / Current type/ polarity / Wire feed rate / Length of weld bead/ rate / Heat input*
1 / 111 / Ø 2,0 / 50-80 / 24 / DC / +
Filler metal designation and trademark: / FM1, ESAB: OK 48.00
EN ISO 2560-A: E 42 4 B 42 H 5
C17 / More data*, for example:
Special drying at higher temperature or drying: / 350 °C/ 2hrs / - Weaving amplitude
(max. width of weld bead): / -
Designation of gas/flux:
- shielding: / - / - Oscillation: amplitude, frequency, dwell / -
- for backing: / - / - Details of the pulse
welding: / -
Gas flow rate:
- shielding: / - / - Contact tube distance from the workpiece: / -
- for backing: / - / - Details of the plasma arc welding: / -
Details of back gouging: / - / - Angle of the torch slope: / -
Preheating temperature: / - / - Other data: / -
Interpass temperature: / - / Manufacturer:
(name, date, signature) / Gold cup Linde
Post-heating: / -
Preheating maintenance temperature: / -
Post-weld heat treatment and/or aging: time, temperature, method, heating rate and cooling rate.*: / -
* if required
Welding procedure specifications (WPS)
Manufacturer: / Gold cup LindeWPS no.: / 01 – 111 P BW PF 10 / WPQR no.: / -
Welding method(s): / 111 / Designation of the basic material (group): / 1.1, S 235
Way of metal transfer: / - / Thickness of the material (mm): / 10,0
Type of weld joint and type of weld: / BW / Outside diameter (mm): / -
Way of preparation and cleaning: / Filing, brushing / Welding position: / PF
Details of a weld preparation (sketch)*
Joint design / Weld run sequence/
Always perform one weld connection in the root and in the capping run.
Welding details
Weld bead / Welding method / Dimension of the filler material / CurrentA / Voltage
V / Current type/ polarity / Wire feed rate / Length of weld bead/ rate / Heat input*
1 / 111 / Ø 2,5 / 65 - 90 / 23 / DC / + / - / - / -
2 - n / 111 / Ø 2,5 / 80 - 100 / 23 / DC / + / - / - / -
- / - / - / - / - / - / - / - / -
Filler metal designation and trademark: / FM1, ESAB: OK 48.00
EN ISO 2560-A: E 42 4 B 42 H 5
C17 / More data*, for example:
Special drying at higher temperature or drying: / 350 °C/ 2hrs / - Weaving amplitude
(max. width of weld bead): / -
Designation of gas/flux:
- shielding: / - / - Oscillation: amplitude, frequency, dwell / -
- for backing: / - / - Details of the pulse
welding: / -
Gas flow rate:
- shielding: / - / - Contact tube distance from the workpiece: / -
- for backing: / - / - Details of the plasma arc welding: / -
Details of back gouging: / - / - Angle of the torch slope: / -
Preheating temperature: / - / - Other data: / -
Interpass temperature: / - / Manufacturer:
(name, date, signature) / Gold cup Linde
Post-heating: / -
Preheating maintenance temperature: / -
Post-weld heat treatment and/or aging: time, temperature, method, heating rate and cooling rate.*: / -
* if required
Welding procedure specifications (WPS)
Manufacturer: / Gold cup LindeWPS no.: / 04 – 135 P BW PA 3 / WPQR no.: / -
Welding method(s): / 135 / Designation of the basic material (group): / 1.1, S 235
Way of metal transfer: / - / Thickness of the material (mm): / 3,0
Type of weld joint and type of weld: / BW / Outside diameter (mm): / -
Way of preparation and cleaning: / Filing, brushing / Welding position: / PA
Details of a weld preparation (sketch)*
Joint design / Weld run sequence/
Perform at least one weld connection
Welding details
Weld bead / Welding method / Dimension of the filler material / CurrentA / Voltage
V / Current type/ polarity / Wire feed rate / Length of weld bead/ rate / Heat input*
1 / 135 / Ø 1 / 70 - 90 / 18 - 20 / DC / + / - / - / -
- / - / - / - / - / - / - / - / -
- / - / - / - / - / - / - / - / -
Filler metal designation and trademark: / FM1, ISO 14341-A: G3Si1
OK AristoRod 12.50 / More data*, for example:
Special drying at higher temperature or drying: / - / - Weaving amplitude
(max. width of weld bead): / -
Designation of gas/flux:
- shielding: / ISO 14175: M21
Corgon / - Oscillation: amplitude, frequency, dwell / -
- for backing: / - / - Details of the pulse
welding: / -
Gas flow rate:
- shielding: / 12 – 16 (l/min) / - Contact tube distance from the workpiece: / -
- for backing: / - / - Details of the plasma arc welding: / -
Details of back gouging: / - / - Angle of the torch slope: / -
Preheating temperature: / - / - Other data: / -
Interpass temperature: / - / Manufacturer:
(name, date, signature) / Gold cup Linde
Post-heating: / -
Preheating maintenance temperature: / -
Post-weld heat treatment and/or aging: time, temperature, method, heating rate and cooling rate.*: / -
* if required
Welding procedure specifications (WPS)
Manufacturer: / Gold cup LindeWPS no.: / 03 – 135 P BW PF 12 / WPQR no.: / -
Welding method(s): / 135 / Designation of the basic material (group): / 1.1, S 235
Way of metal transfer: / - / Thickness of the material (mm): / 12,0
Type of weld joint and type of weld: / BW / Outside diameter (mm): / -
Way of preparation and cleaning: / Filing, brushing / Welding position: / PF
Details of a weld preparation (sketch)*
Joint design / Weld run sequence/
Always perform one weld connection in the root and in the capping run
Welding details
Weld bead / Welding method / Dimension of the filler material / CurrentA / Voltage
V / Current type/ polarity / Wire feed rate / Length of weld bead/ rate / Heat input*
1 / 135 / Ø 1 / 80 - 110 / 18 - 20 / DC / + / - / - / -
2 - n / 135 / Ø 1 / 115 - 130 / 18 - 20 / DC / + / - / - / -
- / - / - / - / - / - / - / - / -
Filler metal designation and trademark: / FM1, ISO 14341-A: G3Si1
OK AristoRod 12.50 / More data*, for example:
Special drying at higher temperature or drying: / - / - Weaving amplitude
(max. width of weld bead): / -
Designation of gas/flux:
- shielding: / ISO 14175: M21
Corgon / - Oscillation: amplitude, frequency, dwell / -
- for backing: / - / - Details of the pulse
welding: / -
Gas flow rate:
- shielding: / 12 – 16 (l/min) / - Contact tube distance from the workpiece: / -
- for backing: / - / - Details of the plasma arc welding: / -
Details of back gouging: / - / - Angle of the torch slope: / -
Preheating temperature: / - / - Other data: / -
Interpass temperature: / - / Manufacturer:
(name, date, signature) / Gold cup Linde
Post-heating: / -
Preheating maintenance temperature: / -
Post-weld heat treatment and/or aging: time, temperature, method, heating rate and cooling rate.*: / -
* if required
Welding procedure specifications (WPS)
Manufacturer: / Gold cup LindeWPS no.: / 06 – 141 P BW PA 2 / WPQR no.: / -
Welding method(s): / 141 / Designation of the basic material (group): / 1.1, S 235
Way of metal transfer: / - / Thickness of the material (mm): / 2,0
Type of weld joint and type of weld: / BW / Outside diameter (mm): / -
Way of preparation and cleaning: / Filing, brushing / Welding position: / PA
Details of a weld preparation (sketch)*
Joint design / Weld run sequence/
Perform at least one weld connection
Welding details
Weld bead / Welding method / Dimension of the filler material / CurrentA / Voltage
V / Current type/ polarity / Wire feed rate / Length of weld bead/ rate / Heat input*
1 / 141 / Ø 2,0 (Ø 2,4) / 60 - 70 / 9 - 13 / DC / - / - / - / -
- / - / - / - / - / - / - / - / -
- / - / - / - / - / - / - / - / -
Filler metal designation and trademark: / FM1, EN ISO 636-A: W2Si OK Tigrod 12.60 / More data*, for example:
Special drying at higher temperature or drying: / - / - Weaving amplitude
(max. width of weld bead): / -
Designation of gas/flux:
- shielding: / ISO 14175: I1
Ar / - Oscillation: amplitude, frequency, dwell / -
- for backing: / - / - Details of the pulse
welding: / -
Gas flow rate:
- shielding: / - / - Contact tube distance from the workpiece: / -
- for backing: / - / - Details of the plasma arc welding: / -
Details of back gouging: / - / - Angle of the torch slope: / -
Preheating temperature: / - / - Other data: / -
Interpass temperature: / - / Manufacturer:
(name, date, signature) / Gold cup Linde
Post-heating: / -
Preheating maintenance temperature: / -
Post-weld heat treatment and/or aging: time, temperature, method, heating rate and cooling rate.*: / -
* if required
Welding procedure specifications (WPS)
Manufacturer: / Gold cup LindeWPS no.: / 05 – 141 P BW PF 4 / WPQR no.: / -
Welding method(s): / 141 / Designation of the basic material (group): / 1.1, S 235
Way of metal transfer: / - / Thickness of the material (mm): / 4,0
Type of weld joint and type of weld: / BW / Outside diameter (mm): / -
Way of preparation and cleaning: / Filing, brushing / Welding position: / PF
Details of a weld preparation (sketch)*
Joint design / Weld run sequence/
Always perform one weld connection in the root and in the capping run.
Welding details
Weld bead / Welding method / Dimension of the filler material / CurrentA / Voltage
V / Current type/ polarity / Wire feed rate / Length of weld bead/ rate / Heat input*
1 / 141 / Ø 2,0 / 60 - 80 / 9 - 12 / DC / - / - / - / -
1 / 141 / Ø 2,4 / 70 - 95 / 10 - 13 / DC / - / - / - / -
- / - / - / - / - / - / - / - / -
Filler metal designation and trademark: / FM1, EN ISO 636-A: W2Si OK Tigrod 12.60 / More data*, for example:
Special drying at higher temperature or drying: / - / - Weaving amplitude
(max. width of weld bead): / -
Designation of gas/flux:
- shielding: / ISO 14175: I1
Ar / - Oscillation: amplitude, frequency, dwell / -
- for backing: / - / - Details of the pulse
welding: / -
Gas flow rate:
- shielding: / - / - Contact tube distance from the workpiece: / -
- for backing: / - / - Details of the plasma arc welding: / -
Details of back gouging: / - / - Angle of the torch slope: / -
Preheating temperature: / - / - Other data: / -
Interpass temperature: / - / Manufacturer:
(name, date, signature) / Gold cup Linde
Post-heating: / -
Preheating maintenance temperature: / -
Post-weld heat treatment and/or aging: time, temperature, method, heating rate and cooling rate.*: / -
* if required