Specifications for Turnout Gear for Cleveland County EMS
Coat-Commando™, Freedom Design
Coat Liner and Moisture Barrier-
Traditional liner, Chambray face cloth quilted to 3.75 oz Virgin 50% para-aramid/50% meta aramid batting quilted to 3.0 oz NOMEX® IIIA, Gore RT7100™ PTFE laminated to 4.6 oz non woven aramid
Coat Inner Yoke Reinforcement-
Semper Dri® front and back yokes sewn to coat thermal liners, (RM1377-059) (Commando, Aero-Commando)
Liner Inspection System-
Coat liner inspection system; PJ Crosstech collar flashing with ¾” loop fastener full length and inspection system w/ ¾”x4” loop on back side of collar
Misc. Fasteners-
¾” x 4” hook sewn to shell collar for the coat liner inspection system. Hook to be placed on the center notch of top collar.
Waterwells-Ever-Dri
Water well: Chambray DWR 2 layer AraFlo® E89 quilt/pajama check crosstech waterwell with ¾” loop, male snap, sew to coat liner
Coat Wristlets-
8” over the hand style-KEVLAR® style
Coat Outer Shell Material-
NOMEX®, 7.5 oz, Yellow, Black, Tan, Red or Natural
Fabric Color-
Royal Blue Outer Shell
Reflective Trim-
3” NFPA L/Y Triple Trim
Drag Rescue Device-
DRD: Firefighter Recovery Harness with 2” welt and 5.25 x 2.5” flap. 1 piece 1x2” loop for harness storage. 2 pieces 1x2” loop on shell flap closure, 2 pieces 1x2” hook on flap. 1 piece 2x2” loop underneath chest trim for harness storage, 1 pair 1x3.5” self-fabric straps with 1x2” hook and loop
Coat Collar-
3” piece contoured collar self-fabric inside layer, 2 layer araflo quilt & GORE RT7100 PTFE, self-fabric outer layer, 1 piece 1.5x4 hook and loop, pleat collar w/ ¾” hook
--NO Throat Tab
Coat Cuff Reinforcement-
Black Leather Cuff Reinforcements
Coat Shoulder Reinforcements-
Black Leather shoulder caps
Coat Closure System-
3” Zipper coat closure with FR hook & loop storm flap closure
Turn-Out/Radio Pocket-Located Chest Left
3.5 x 9 x 2” Radio pocket w/ poly cotton fully lined all 3 sides inside pocket, 1 pc. 1x2” loop on pocket & 1 pc. 1x2” hook on flap
Sewn On Lettering-Shall be------EMS------
Location:Across Yoke
Sewn on 3” Lime/Yellow 3M™ Scotchlite™ Letters (each line)
Mic Tab-Located on Left Chest above Radio Pocket
2” x 5” triple layer self fabric mic tab sewn on to shell and four (4) bartacks, two each end
Hanger Loop-
Standard 5/8” x 5 ½” Self fabric hangerloop
Take Up Straps-Located Above Lower Hem Trim Left and Right
1 pair 1” wide self fabric take up straps, 1x3.5” hook, 1x4.5” loop, bartacked, 1” nickel loop for adjustment
Turnout Pants-Janesville® Super Pant™
Pant Liner & Moisture Barrier-
Traditional liner, Chambray face cloth quilted to 3.75 oz Virgin 50% para-aramid/50% meta aramid batting quilted to 3.0 oz NOMEX® IIIA Gore RT7100™ PTFE laminated to 4.6 oz non woven aramid
Liner Inspection System-
Pant liner inspection system with 1x3” loop located at right side of liner waist
Misc Fasteners-
1x3” hook sewn to right shell front for the pant liner inspection system
Suspenders-
42” regular RED four-way non stretch suspenders with Metal Loops
Pant Outer Shell Material-
NOMEX®, 7.5 oz, Yellow, Black, Tan, Red, or Natural
Fabric Color-Blue
Blue Outer Shell Material
Leg Tabs-
2 Leather leg tabs per leg with non-logo female snaps
Pant Fly Closure-
Pant fly w/ PJ Ctech, closure zipper inside w/ 1.5” hook & loop, ¾” hook underneath PJ Crosstech for liner attachment
Take Up Straps-
1 short leather take-up strap riveted, 703 snap hook, D-ring
Take Up Straps-
Outer shell material take-up straps (2) with FR hook & loop closure and two nickel loops
Pant Knee Reinforcement-
Black leather knees
Pant Cuff Reinforcement-
Black leather pant cuffs
Turn-Out Pockets-Located Thigh Left and Right
Two (2) 10x10x2” full bellow pocket w/ KEVLAR® twill fully lined all 4 sides, 1 pc 1x10” loop on pocket & 3 pcs, 1x3” hook on flap
Reflective Trim-
3” Yellow Triple Trim Reflective trim around leg bottoms-4 rows lockstitch
Reflective Trim-
3” Yellow Triple Trim Reflective trim extending from waist to pocket flap & from bottom of bellow knees to hem centered at outseam position. 4 rows lockstitch