Specialty Medical Supplies

OSHA Standard Format

SECTION 1: PRODUCT IDENTIFICATION

PRODUCT: Mouth Rinse

Product Label Name: Mouth Rinse

Company Name and Address: NDC, Inc.

407 New Sanford Road

La Vergne, TN 37086

Emergency Telephone Number: 631-656-3800

Recommended use: Used as a Mouth Rinse.

SECTION 2: HAZARDOUS INGREDIENTS

Overview: A blue liquid with a pleasant mint flavor. This product is intended to be used as a rinse

for teeth and gums. No unusual hazards expected.

Warning: Not a Sterile Liquid. Not for use with Patients on Mechanical Ventilators, Patients

suffering from Cystic Fibrosis, or a Weakened Immune System.

Hazardous Components

(Specific Chemical Identity: Common Name(s) OSH PEL ACGIH TLV

This product contains no SARA 312 or SARA 313 reportable substances

Not regarded as health or environmental hazard under current legislation. The product will not

present significant health hazard in normal use.

Product in compliance with California Prop 65 requirements.

NA = Ingredients not usually considered hazardous; no TLV or PEL available

SECTION 3: INFORMATION ON INGREDIENTS

Not Applicable

SECTION 4: FIRST-AID MEASURES

Inhalation: Not expected.

Skin contact: This product is expected to contact with skin. Skin irritation -wash with soap and

water

Eye contact: Rinse immediately with plenty of water, also under the eyelids, for at least 15

minutes. Obtain medical attention if irritation persists.

Ingestion: Call a physician or Poison Control Center

SECTION 5: FIRE-FIGHTING MEASURES

Flashpoint: N/A

Flammable Limits: N/A

LEL (Lower): None

UEL (Upper): None

Suitable Extinguishing Media: Foam, CO2

Special Fire fighting Procedure: None

Unusual Fire and Explosion Hazards: None

Hazardous Combustion Products: None

SECTION 6: ACCIDENTAL RELEASE MEASURES

Steps to be taken in case of material release or spilled: Wipe up small amounts and flush area to

drain; collect and return large amounts to container.

Waste Disposal: Dispose of in accordance with all applicable local, state, and federal regulations.

SECTION 7: HANDLING AND STORAGE

Avoid Extreme Heat and Cold. Store in cool, dry place

Other Precautions NOTE: UNDER NORMAL CONDITIONS OF USE, THIS PRODUCT IS

NOT A HAZARDOUS MATERIAL AS DEFINED BY THE OSHA HAZARD

COMMUNICATIONS STANDARD

SECTION 8: EXPOSURE CONTROLS

Ventilation: No special ventilation normally required.

Respiratory Protection: No personal respiratory protective equipment normally required

Protective Gloves: Not required.

Eye protection: Not required for normal use.

Work/Hygienic Practice: Normal cleanliness

SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES

Appearance and Odor: A clear blue liquid with pleasant mint odor.

Boiling point / range: 212 º F

Melting point / range: N/A

Specific Gravity (water = 1): 1.0

Solubility in Water: Soluble

Vapor Pressure (mmHg.): 17.5

Vapor density (AIR = 1): N/A

SECTION 10: STABILITY AND REACTIVITY

Stability: Stable

Condition to Avoid: Extreme Temperatures

Materials to Avoid: Strong Oxidizers, Strong Acids, Active Metals

Hazardous Decomposition Products: None

Hazardous Polymerization: Will not occur

SECTION 11: TOXICOLOGICAL INFORMATION

Symptoms / Effects of Over-exposure: None Known

Medical conditions that may be aggravated by exposure: May cause skin irritation in very

sensitive individuals.

SECTION 12: ECOLOGICAL INFORMATION

No data is currently available

SECTION 13: DISPOSAL CONSIDERATIONS

Dispose in accordance with all state, local and federal regulations.

SECTION 14: TRANSPORTATION INFORMATION

N/A

SECTION 15: REGULATORY INFORMATION

N/A

SECTION 16: OTHER INFORMATION

Prepared By: Kara Mckigney

Issue Date: 5-8-14

Revision Date: 5-8-14

Disclaimer:

The information provided in this SDS is correct and is to the best of our knowledge,

at the date of its publication. The information given is designed only as a guide for safe handling,

use, processing, storage, transportation, disposal and release and is not to be considered as a

warranty or quality specification. The information relates only to the specific material designated and

may not be valid for such material used in combination with any other material or in any process, unless specified in the text.

OSHA Standard Format