Sokkia Spectrum Survey Field 8.2.1
December 6, 2011
The information contained in this document is confidential and is intended solely for the use of the individual or entity to which it was sent. You should not copy, disclose or distribute this document without the authority of Topcon PositioningSystems, Inc.
8.2.1 Features and Changes
General
· Improved data recall for HR in stakeout.
· Corrected an issue related to LN3/PT3 localization import.
· Custom projection input fields were better aligned for vertical screens.
· The X-Section survey routine start station was being applied incorrectly.
· Corrected a BS Height change instance that appeared after Angles Set points were deleted from the Measurement tab.
· Corrected a display issue related to stations.
· X-Section survey now shows Station values, instead of Along CL, for total stations and GPS.
· Entering an azimuth in COGO using P1-P2 method would return the grid azimuth in some cases, even though the job was set for ground.
· Corrected an issue that caused the mountpoint source table to be incomplete in certain networks.
8.2 Features and Changes
Important Notes!
· It is recommended that existing jobs are backed up prior to installing any software update.
· Hiper II antenna information has been updated with the latest NGS calibration numbers. Users with existing jobs should export to common export formats (e.g. LandXML, TP3, GC3, DWG, ASCII, TXT) and create new jobs to avoid elevation changes is the existing job.
Equipment
· Added support for Gowin total station.
General
· Added the ability to set the display precision for Angles, Distances, Coordinates, Elevations and Stakeout Data (including Stake Reports).
· Added Square/Cubic units in reports.
· Added the ability to append data to an existing CMM file during export.
· Added the ability to display distances in chains.
· Support for chains as a unit type for import/export was added.
· Swapped the exported name/description values for TP3/GC3 localizations.
· Import SBG format road file was improved to properly support the X-Section Set names and vertical offsets in templates.
· Changing NTRIP mountpoint no longer loses the mmGPS+ solution.
· Support for Singapore geoid.
Survey
· Virtual objects improved in TOPO with IS Live Video.
· Monitor observations now continue if a prism is missing.
· Scanning without image performance was improved for the FC-2500.
· Coarse scanning no longer stops after each row.
· Insert command for linework now works for Robotic mode.
Stakeout
· Values no longer remain on screen if the robotic measurements are not being received.
Page 1