ChryslerConstruction Standards

11/29/07

SECTION 15121 - PIPE EXPANSION FITTINGS AND LOOPS

PART 1 - GENERAL

1.1SUMMARY

  1. This Section includes pipe expansion fittings and loops for mechanical piping systems, and the following:
  2. Metal-bellows expansion joints.
  3. Expansion compensators.
  4. Rubber expansion joints.
  5. Flexible-hose expansion joints.
  6. Slip expansion joints.
  7. Victaulic coupling-type expansion joints.
  8. Pipe bends and loops.
  9. Guides and anchors.

1.2PERFORMANCE REQUIREMENTS

  1. Compatibility: Products suitable for piping system fluids, materials, working pressures, and temperatures. Note refer to Section 15200 for specific requirements for Industrial Wastewater Applications.
  2. Capability: Absorb 200 percent of maximum piping expansion between anchors.

1.3SUBMITTALS

  1. Product Data: For each type of expansion fitting indicated.
  2. Shop Drawings: Signed and sealed by a qualified professional engineer.
  3. Anchor Details: Detail fabrication of each indicated. Show dimensions and methods of assembly.
  4. Alignment Guide Details: Detail field assembly and anchorage.
  5. Welding Certificates: Copies of certificates for welding procedures and personnel.
  6. Schedule: Indicate manufacturer's number, size, location, and features for each expansion fitting and loop.

1.4QUALITY ASSURANCE

  1. Engineering Responsibility: Design and preparation of Shop Drawings and calculations for expansion fittings and loops by a qualified professional engineer.
  2. Welding: Qualify processes and operators according to ASME Boiler and Pressure Vessel Code: SectionIX, "Welding and Brazing Qualifications."
  3. Victaulic expansion joints smayhall be used with grooved piping systems, and if used shall be installed with Victaulic couplings of a style suited to the required service.

PART 2 - PRODUCTS

2.1MANUFACTURERS

  1. Manufacturers: Unless otherwise directed by the Owner, provide products by one of the following:
  2. Metal-Bellows Expansion Joints:
  3. Adsco Manufacturing Corp.
  4. Anamet, Inc.
  5. Badger Industries, Inc.
  6. Expansion Joint Systems, Inc.
  7. Flexicraft Industries.
  8. Flex-Weld, Inc.
  9. Hyspan Precision Products, Inc.
  10. Metraflex Co.
  11. Pathway Bellows, Inc.
  12. Piping Technology & Products, Inc.
  13. Proco Products, Inc.
  14. Senior Flexonics, Inc.; Expansion Joint Div.
  15. Wahlco Engineered Products, Inc.
  16. Expansion Compensators:
  17. Adsco Manufacturing Corp.
  18. Flexicraft Industries.
  19. Flex-Weld, Inc.
  20. Hyspan Precision Products, Inc.
  21. Metraflex Co.
  22. Senior Flexonics, Inc.; Expansion Joint Div.
  23. Rubber Expansion Joints:
  24. Flexicraft Industries.
  25. Flex-Weld, Inc.
  26. Garlock, Inc.
  27. General Rubber Corp.
  28. Mercer Rubber Co.
  29. Metraflex Co.
  30. MG Piping Products Co.
  31. Proco Products, Inc.
  32. Senior Flexonics, Inc.; Expansion Joint Div.
  33. Vibration Mountings & Controls, Inc.
  34. Flexible-Hose Expansion Joints:
  35. Flexicraft Industries.
  36. Metraflex Co.
  37. Slip Expansion Joints:
  38. Adsco Manufacturing Corp.
  39. Advanced Thermal Systems, Inc.
  40. Hyspan Precision Products, Inc.
  41. Victaulic Co. of America.
  42. Victaulic Coupling-Type Expansion Joints:

a.Victaulic Co. of America.

  1. Guides:
  2. Adsco Manufacturing Corp.
  3. Advanced Thermal Systems, Inc.
  4. B-Line Systems, Inc.
  5. Flex-Weld, Inc.
  6. Grinnell Corp.
  7. Hyspan Precision Products, Inc.
  8. Metraflex Co.

2.2PACKLESS EXPANSION JOINTS

  1. Metal-Bellows Expansion Joints: 175-psig minimum pressure rating, with end fittings and external tie rods for limiting maximum travel, and flanged-end connections, unless otherwise indicated.
  2. Configuration: Single- and double-bellows type, with base, unless otherwise indicated.
  3. Joints for Copper Piping: Two-ply, phosphor-bronze bellows and brass shrouds.
  4. Joints for Stainless-Steel Waterway: Single-ply stainless-steel bellows, stainless-steel-pipe end connections, and steel shroud.
  5. Joints for Steel Piping: Two-ply, stainless-steel bellows and carbon-steel shroud.
  6. Expansion Compensators: 175-psig minimum pressure rating, with internal guides, anti torque device, and removable end clip for positioning.
  7. End Connections for NPS2 and Smaller: Threaded.
  8. End Connections for NPS 2-1/2 and Larger: Flanged.
  9. Joints for Copper Piping: Two-ply, phosphor-bronze bellows and brass shroud.
  10. Joints for Steel Piping: Two-ply, stainless-steel bellows and carbon-steel shroud.
  11. Rubber Expansion Joints: ASTMF1123, fabric-reinforced butyl rubber, and pressure rated for 175 psig at 240 deg Fminimum.
  12. Configuration: Full-faced, integral, steel-flanged-end connections; external control rods; and steel retaining rings drilled to match flange bolt holes.
  13. Flexible-Hose Expansion Joints: Manufactured assembly with two flexible-metal-hose legs joined by long-radius 180-degree return bend with inlet and outlet elbow fittings, corrugated-metal inner hoses, and braided outer sheaths.
  14. Joints for Copper Piping: Copper fittings with solder-joint end connections.
  15. NPS2 and Smaller: Bronze hoses and double-braid bronze sheaths with 700 psig at 70 degFand 500 psig at 450 degF minimum pressure ratings.
  16. NPS2-1/2 to NPS4: Stainless-steel hoses and double-braid, stainless-steel sheaths with 420 psig at 70 degF and 315 psig at 450 degF minimum pressure ratings.
  17. Joints for Steel Piping: Carbon-steel fittings.
  18. End Connections for NPS2 and Smaller: Threaded.
  19. End Connections for NPS2-1/2 and Larger: Flanged.
  20. Joints for NPS2 and Smaller: Stainless-steel hoses and single-braid, stainless-steel sheaths with 450 psig at 70 degF and 325 psig at 600 degF minimum pressure ratings.
  21. Joints for NPS2-1/2 to NPS6: Stainless-steel hoses and double-braid, stainless-steel sheaths with 275 psig at 70 degF and 200 psig at 600 degF minimum pressure ratings.
  22. Joints for NPS8 and Larger: Stainless-steel hoses and double-braid, stainless-steel sheaths with 165 psig at 70 degF and 120 psig at 600 degF minimum pressure ratings.

2.3PACKED EXPANSION JOINTS

  1. Slip Expansion Joints: Carbon-steel, packing-type pipe expansion joint designed for repacking under pressure and pressure rated for 250 psig at 400 degF minimum with compound limit stops, flanged or weld ends to match piping system, drip connection if used for steam piping systems, and flanged-end connections, unless otherwise indicated.
  2. Packing: Asbestos-free polytetrafluoroethylene.
  3. Double-Slip Type: With base.

2.4PACKLESS GASKETED EXPANSION JOINTS

  1. Slip Expansion Joints: 350-psig maximum working pressure at 230 deg F maximum, grooved end fitting consisting of a telescoping carbon steel body and slip-pipe sections, coupled with grooved-mechanical joint couplings. Slip pipe section PPS (Polyphenolsulfide ) coated. Suitable for axial end movement to 3”.
  2. Victaulic Style 150 or equal. Do not use for steam or steam condensate piping.

2.5VICTAULIC COUPLING-TYPE EXPANSION JOINTS:

  1. Expansion joint consisting of a series of grooved end pipe nipples joined in tandem with Victaulic Style 77 flexible couplings or equal. Total joint movement dependent on the number of couplings used in the joint.
  2. Victaulic Style 155 or equal. Do not use for steam or steam condensate piping.

2.42.6GUIDES

  1. Steel, factory fabricated, with bolted two-section outer cylinder and base for alignment of piping and two-section guiding spider for bolting to pipe.

2.52.7MISCELLANEOUS MATERIALS

  1. Structural Steel: ASTMA36/A36M.
  2. Bolts and Nuts: ASMEB18.10 or ASTMA183, steel, hex head.
  3. Washers: ASTMF844, steel, plain, flat washers.
  4. Mechanical Fasteners: Insert-wedge-type stud with expansion plug anchor for use in hardened portland cement concrete, and tension and shear capacities appropriate for application.
  5. Stud: Threaded, zinc-coated carbon steel.
  6. Expansion Plug: Zinc-coated steel.
  7. Washer and Nut: Zinc-coated steel.
  8. Chemical Fasteners: Insert-type-stud bonding system anchor for use with hardened portland cement concrete, and tension and shear capacities appropriate for application.
  9. Bonding Material: ASTMC881, TypeIV, Grade3, two-component epoxy resin suitable for surface temperature of hardened concrete where fastener is to be installed.
  10. Stud: ASTMA307, zinc-coated carbon steel with continuous thread on stud, unless otherwise indicated.
  11. Washer and Nut: Zinc-coated steel.
  12. Concrete: Portland cement mix, 3000 psi minimum. Refer to Division3 Section "Cast-in-Place Concrete" for formwork, reinforcement, and concrete.
  13. Grout: ASTMC1107, GradeB, factory-mixed and -packaged nonshrink and nonmetallic grout; suitable for interior and exterior applications.
  14. Characteristics: Post-hardening, volume-adjusting, dry, hydraulic-cement grout.
  15. Properties: Nonstaining, noncorrosive, and nongaseous.
  16. Design Mix: 5000-psi28-day compressive strength.

PART 3 - EXECUTION

3.1EXPANSION FITTING INSTALLATION

  1. Install expansion fittings according to manufacturer's written instructions.
  2. Install expansion fittings in sizes matching pipe size in which they are installed.
  3. Align expansion fittings to avoid end-loading and torsional stress.

3.2PIPE BEND AND LOOP INSTALLATION

  1. Install pipe bends and loops cold-sprung in tension or compression as required to partly absorb tension or compression produced during anticipated change in temperature.
  2. Attach pipe bends and loops to anchors.
  3. Steel Anchors: Attach by welding. Comply with ASMEB31.9 and ASME Boiler and Pressure Vessel Code: SectionIX, "Welding and Brazing Qualifications."
  4. Concrete Anchors: Attach by fasteners. Follow fastener manufacturer's written instructions.
  5. Install Victaulic Style 77 or equal flexible couplings on pipe loops to partly absorb tension or compression produced during anticipated change in temperature. Support and hanging shall be in accordance with the latest instructions published by Victaulic Cosupplier..

3.3SWING CONNECTIONS

  1. Connect risers and branch connections to mains with at least five pipe fittings, including tee in main.
  2. Connect risers and branch connections to terminal units with at least four pipe fittings, including tee in riser.
  3. Connect mains and branch connections to terminal units with at least four pipe fittings, including tee in main.

3.4GUIDE INSTALLATION

  1. Install guides on piping adjoining expansion fittings and loops.
  2. Attach guides to pipe and secure to building structure.

3.5ANCHOR INSTALLATION

  1. Install anchors at locations to prevent stresses from exceeding those permitted by ASMEB31.9 and to prevent transfer of loading and stresses to connected equipment and to keep alignment of flex connections.
  2. Fabricate and install steel anchors by welding steel shapes, plates, and bars to piping and to structure. Comply with ASMEB31.9 and AWSD1.1.
  3. Construct concrete anchors of poured-in-place concrete of dimensions indicated and include embedded fasteners.
  4. Install pipe anchors according to expansion fitting manufacturer's written instructions if expansion fittings are indicated.
  5. Use grout to form flat bearing surfaces for expansion fittings, guides, and anchors installed on or in concrete.

3.6PAINTING

  1. Touching Up: Cleaning and touchup painting of field welds, bolted connections, and abraded areas of shop paint on miscellaneous metal are specified in Division9 Section "Painting."
  2. Galvanized Surfaces: Clean welds, bolted connections, and abraded areas and apply galvanizing-repair paint to comply with ASTMA780.

END OF SECTION

PIPE EXPANSION FITTINGS AND LOOPS15121 - 1 of 6