Russian Symbols

RUSSIAN SYMBOLS

To associate a favorite pattern, you need to be able to use schemes that use symbols.Schematic entry of the pattern to be read from the bottom up.The figures given by the lower horizontal line, indicate the number of loops and is called rapport.Right standing figures - this facial series and read them from right to left.Purl rows are indicated on the left, and the recording of these series is read from left to right.Sometimes rapport indicated only facial series - odd.This means that even facial rows are knitted in pattern and in rapport they are not specified.This technique is used in personal or knitting in the figure.Face the front of the loop indicated by a viscous, purl - purl.

Patterns given in the book are described verbally and diagrams.Below are the symbols used in the diagrams.- Front loop.- Wrong loop.- Two loops along the front of the rear wall.- Two loops along the underside.- Three loops along the front of the rear walls.- three hinges along the underside.- Two loops together at the front of the wall.- Two loops together in a manner perekidy.- Three loops together in a manner perekidy and permutation loops.- Pull the loop of the gap between the loops.- Previous loop (thread for a previous loop ).- Previous loop (thread before removing the loop).- sc.- Dual sc.- Front loop for the back wall.- from one loop to make three (the number in the legend indicates the number of loops).- All dialed loops together.- From three loops to make three (asterisk).- knobs: 2 sts knit facial;without dropping the front spokes, make sc to the right and a second knit the same loop (as in the way "from one loop to make three").So repeated until until you get 5 loops.Turn the work and knit 5 sts received facial.Again, turn the work on the front side and knit these 5 sts facial for the back wall.- The addition of a new loop of yarn.- 4 loop knit as follows: 1st purl loop, then without dropping knit loops with needles, knit together its second purl with the 2nd loop.Unworked loops leave the spoke and knit 3 purl loops together.Then knit together all 4 loops and remove them from the left spokes.- Two loops to remove the pin before work (harness from right to left).- Two loops to remove the pin at work (harness from left to right).- Hinges placed before work.- Hinges, placed at work.- Move the 2nd loop on top of the 1st.- Move 1st loop on top of the 2nd.- Move to the right through the front loop of the wrong.- Move two end loops through the right the wrong.- Move left through the front loop of the wrong .- Move 2nd front loop to the right.- Move three loops (front, purl, facial)- Move to the right through the front loop 2 facial.- Move left through the front loop 2 facial.- Move left across the two faces the wrong loop.- Move 3 face right after 5 loops.- Move 3 facial left after 5 loops- Pull the thread from the gap between the loops (6 entwined loops).- Receive knitting with a long loop (loop with three turns of thread).- Moved loop.- The point at knitting does not take into account - the sign is put for convenience scheme.- Edge Trimming loop.- The elongated loop (front or Wrong) to pull it out of the loop below the operating line.- Knit front loop in the right and wrong series ("rope").- Six loops cross the 2 loops to postpone the 1st auxiliary pin, 3rd and 4th - defer to the 2nd auxiliary pin, 5, and 6-knit face, provyazyvaem hinges with 2nd pin, and then with 1 d.- Cross-bred loop.
Patterns given in the book are described verbally and diagrams.
Below are the symbols used in the diagrams.
- Front loop.
- Wrong loop.
- Two loops along the front of the rear wall.
- Two loops along the underside.
- Three loops along the front of the rear wall.
- Three loops along the underside.
- Two loops together at the front wall.
- Two loops together in a manner perekidy.
- Three loops together in a manner perekidy and permutation loops.
- Pull the loop of the gap between the loops.
- Previous loop (thread for a previous loop).
- Remove the loop (before the thread is removed loop).
- Sc.
- Dual sc.
- Front loop for the back wall.
- From one to make three loops (the number in the legend indicates the number of loops).
- All dialed loops together.
- Of the three loops to make three (asterisk).
- Knobs: 2 sts knit facial;without dropping the front spokes, make sc to the right and a second knit the same loop (as in the way "from one loop to make three").So repeated until until you get 5 loops.Turn the work and knit 5 sts received facial.Again, turn the work on the front side and knit these 5 sts facial for the back wall.
- Addition of a new loop of yarn.
- 4 loop knit as follows: 1st purl loop, then without dropping knit loops with needles, knit her a second wrong with the 2nd loop.Unworked loops leave the spoke and knit 3 purl loops together.Then knit together all 4 loops and remove them from the left spokes.
- Two loops to remove the pin before work (harness from right to left).
- Two loops to remove the pin at work (harness from left to right).
- Hinges placed before work.
- Hinges are placed at work.
- Move the 2nd loop on top of the 1st.
- Move the 1st loop on top of the 2nd.
- Move to the right through the front loop of the wrong.
- Move two end loops to the right through the underside.
- Move left through the front loop of the wrong.
- Move the 2nd front loop to the right.
- Move the three loops (front, purl, facial)
- Move to the right through the front loop 2 facial.
- Move left through the front loop 2 facial.
- Move left across the two faces the wrong loop.
- Move 3 face right after 5 loops.
- Move 3 facial left after 5 loops
- Pull the thread from the gap between the loops (6 entwined loops).
- Acceptance of knitting with a long loop (loop with three turns of thread).
- Moved loop.
- Point when knitting in mind not to take - a sign placed for the convenience of recording scheme.
- Edge Trimming loop.
- Elongated loop (front or Wrong) to pull it out of the loop below the operating line.
- Knit front hinge right and wrong series ("rope").
- Six loops cross the 2 loops to postpone the 1st auxiliary pin, 3rd and 4th - defer to the 2nd auxiliary pin, 5, and 6-knit face, provyazyvaem hinges with 2nd pin, then 1 th.
- Cross-bred loop.

Page 1 of 6