PONUKA 2013:

REGRANULÁTY / KOMPAUNDY / DRŤE

Produktová rada č.1

LDPE regranulates / Colour options / MFR (Melt Flow Rate) / Applications (1)
Grades / Material / / / / / / / / 190° / 2,16 kg / / / /
LDPE 2010 F / LDPE / / / / / / 0,5 - 1,0 / / / /
LDPE 2020 F / LDPE / / / / 1,0 - 2,0 / / / /
LDPE 2070 i / LDPE / / 5,0 - 8,0 / / / /
LDPE/ EVOH / LDPE EVOH / / / 0,5 - 1,0 / / / /
LDPE 2000 WW / LDPE / / / / 0,5 - 1,0 / / / /
LDPE 2000 WW / LDPE / / 0,7 - 1,2 / / / /
HDPE regranulates / Colour options / MFR (Melt Flow Rate) / Applications (1)
Grades / Material / / / / / / / / 190° C/
2,16 kg / 190° C/
5,0 kg / / / / /
HDPE 5009 E / HDPE / / 0,5 - 0,9 / /
HDPE 5010 E / HDPE / / 0,5 - 1,0 / / /
HDPE 5080 i / HDPE / / 5,0 - 8,0 /
HDPE 5200 i / HDPE / / / / ca. 20,0 /
PP regranulates / Colour options / MFR (Melt Flow Rate) / Applications (1)
Grades / Material / / / / / / / / nach 230°/ 2,16 kg / / / /
PPH 1050 i / PP / / 4,0 - 7,0 /
PPC 1010 E / PP / / / / 0,5 - 1,0 / / /
PPC 1017 E / PP / / / 1,2 - 1,7 / / /
PPC 1035 E / PP / / 2,5 - 3,5 / / /
PP 1012 E / PP / / / 0,5 - 1,2 / / /
PP 1025 E / PP / / / 1,5 - 2,5 / / / /
PP 1100 i / PP / / / / 5,0 - 10,0 /
PP 1170 i / PP / / 12,0 - 17,0 /
PP 1300 i / PP / / / / 20,0 - 30,0 /
ABS- and PP compounds / Colour
options / Technical values / Applications (1)
Grades / Material / / / / / / / / / / / / /
ABS 1310 / ABS / / / 13 / 1,05 / > 10 / 55 / 2500 / - / / /
ABS 1020 / ABS / / 10 / 1,05 / > 20 / o.B. / 1900 / - / / /
ABS 1613 / ABS / / 16 / 1,05 / > 13 / 70 / 2300 / - /
ABS 2010 / ABS / / 20 / 1,05 / > 10 / 55 / 2500 / - /
ABS 2016 / ABS / / 20 / 1,05 / > 16 / 80 / 2100 / - /
PC/ABS A35 / PC/ABS / / 28 / 1,13 / > 28 / o.B. / 2000 / - /
PP KV 20 / PP / / 10 / 1,05 / - / - / 1650 / 20 /
PP TV 20 / PP / / 5 / 1,06 / > 3 / 40 / 2200 / 20 / /
PP TV 30 / PP / / 8 / 1,13 / > 3 / 25 / 2700 / 30 /
PP TV 40 / PP / / 11 / 1,25 / > 3,5 / 17 / 3200 / 40 /
PP TV 20/01 / PP / / 10,5 / 1,06 / > 3,5 / 40 / 2150 / 20 /
PPC TV 20/03 / PP / / 0,75 / 1,06 / > 5 / - / - / 20 / / /
PPC Impact modified / PP / / 8 / 0,95 / > 7 / o.B. / 1200 / - /

Produktová rada č:2

LDPE/HDPE NO1

Resin Type Polyethylene Low Density, Polyethylene High Density

Forms Regrind

Colors Mix

Quantity 60 T/month

Package Big-bag ~750 kg. 22 big-bag`s/truck

Available 14 day`s past order

Technical Data

Physical Nominal Value Unit

Melt Mass-Flow Rate

(MFR)

190 C/ 2,16 kg

1,5 g/10 min

Melt Mass-Flow Rate

(MFR)

190 C/ 5 kg

4 g/ 10 min

PP REGRIND BLACK NO1

Resin Type Polypropylene

Forms Regrind

Colors Black

Quantity 100 T/month, 350 T now in the magazine

Package Big-bag ~750 kg. 22 big-bag`s/truck

Available 14 day`s past order

Technical Data

Physical Nominal Value Unit

Melt Mass-Flow Rate

(MFR)

190 C/ 2,16 kg

1,8 - 2 g/10 min

Melt Mass-Flow Rate

(MFR)

190 C/ 5 kg

5-7 g/ 10 min

PP/PE REGRIND HARD NO1

Resin Type Polypropylene, Polyethylene High Density

Forms Regrind

Colors Mix

Quantity 40 T/month

Package Big-bag ~850 kg. 22 big-bag`s/truck

Available 14 day`s past order

Technical Data

Physical Nominal Value Unit

Melt Mass-Flow Rate

(MFR)

190 C/ 2,16 kg

3-5 g/10 min

PP FILM NO2

Resin Type Polypropylene

Forms Regrind, printed

Colors Mix

Quantity 60 T/month

Package Big-bag ~350 kg. 40 big-bag`s/truck

Available 14 day`s past order

Technical Data

Physical Nominal Value Unit

Melt Mass-Flow Rate

(MFR)

230 C/ 2,16 kg

5 g/10 min

HDPE Regrind INJ N25

Resin Type Polyethylene, High Density

Forms Regrind

Colors Mix

Quantity 60 T/month

Package Big-bag ~850 kg. 22 big-bag`s/truck

Available 14 day`s past order

Technical Data

Physical Nominal Value Unit

Density 0,95 g/cm3

Melt Mass-Flow Rate

(MFR)

190 C/ 2,16 kg

2 g/10 min

Melt Mass-Flow Rate

(MFR)

190 C, 5 kg

6 g/10 min

PVC NO1

Resin Type Polyvinyl chloride

Forms Regrind

Colors Blue, Green or Black

Quantity 60 T/month

Package Big-bag ~750 kg. 24 big-bag`s/truck

Available 14 day`s past order

Technical Data

Physical Nominal Value Unit

Density 1,34 g/cm3

Hardness Shore`a 75 Sh D

Vicat test (A 50) 79,1

Mechanical Nominal Value Unit

Tensile Stress at Yield 44,7 MPa

Tensile Strain at Yield 185,00%

HDPE EXT N35

Resin Type Polyethylene, High Density

Forms Regranulate

Colors Black

Quantity 120 T/month

Package Big-bag ~1100 kg. 22 big-bag`s/truck

Available 14 day`s past order

Technical Data

Physical Nominal Value Unit

Density 0,94 g/cm3

Melt Mass-Flow Rate

(MFR)

190 C/ 2,16 kg

0,4 – 0,8 g/10 min

Melt Mass-Flow Rate

(MFR)

190 C, 5 kg

< 1,8 g/10 min

Mechanical Nominal Value Unit

Tensile Modulus 740 MPa

Tensile Stress at Yield 23,7 MPa

Tensile Strain at Yield 186,80%

Impact Nominal Value Unit

Charpy Notched Impact

Strenght (23 C)

40 kJ/m2

HDPE INJ N 1

Resin Type Polyethylene, High Density

Forms Regranulate

Colors Black and Green

Quantity 120 T/month

Package Big-bag ~1100 kg. 22 big-bag`s/truck

Available 14 day`s past order

Technical Data

Physical Nominal Value Unit

Density 0,95 g/cm3

Melt Mass-Flow Rate

(MFR)

190 C/ 2,16 kg

1,8 - 2 g/10 min

Melt Mass-Flow Rate

(MFR)

190 C, 5 kg

6-8 g/10 min

Mechanical Nominal Value Unit

Tensile Modulus 785 MPa

Tensile Stress at Yield 22 MPa

Tensile Strain at Yield 253,70%

Impact Nominal Value Unit

Charpy Notched Impact

Strenght (23 C)

15 kJ/m2

HDPE EXTINJ N20

Resin Type Polyethylene, High Density

Forms Regranulate

Colors Black

Quantity 120 T/month

Package Big-bag ~1100 kg. 22 big-bag`s/truck

Available 14 day`s past order

Technical Data

Physical Nominal Value Unit

Density 0,95 g/cm3

Melt Mass-Flow Rate

(MFR)

190 C/ 2,16 kg

0,8 g/10 min

Melt Mass-Flow Rate

(MFR)

190 C, 5 kg

< 5 g/10 min

Mechanical Nominal Value Unit

Tensile Modulus 820,5 MPa

Tensile Stress at Yield 22,8 MPa

Tensile Strain at Yield 253,70%

Impact Nominal Value Unit

Charpy Notched Impact

Strenght (23 C)

32, 9 kJ/m2

SCRAP OFFER

Scrap list

Material Description

PET dirty regrind with

metal < 1 %

Quantity: 80 T/month, material is dirty, Colour: Transparent,

Regrind plastic`s 50 T/month, material include every kind of plastic`s,

Produktová rada č.3 PET

PET granules for textile thread production

Nr. / Name of Characteristic / Value for D Grade
1 / Appearance and Color / Chips of light grey to light yellow color
2 / Size of Chips, mm / (3,8 ± 0,5)х(2,5 ± 0,5)
х(4,0 ± 0,75)
3 / Dust Wight Fraction, %, no more than / 0,02
4 / Uncut Chips Wight Fraction, %, no more than / 0,1
5 / Specific viscosity in dichloroacetic acid, units / 827 ± 7
6 / Moisture Wight Fraction, %, no more than / 0,1
7 / Titanium Dioxide Wight Fraction,% / 0,30 ± 0,02
8 / No of COOH-groups, mol/kg, no more than / 30,0
9 / DEG Wight Fraction, %, no more than / 0,8
10 / Melting Point, °C / 261 ± 2

PET granules for technical thread production

Nr. / Name of Characteristic / Value for E Grade
1 / Appearance and Color / Chips of light grey to light yellow color
2 / Size of Chips, mm / (3,8 ± 0,5)х(2,5 ± 0,5)
х(4,0 ± 0,75)
3 / Dust Wight Fraction, %, no more than / 0,02
4 / Uncut Chips Wight Fraction, %, no more than / 0,1
5 / Specific viscosity in dichloroacetic acid, units / 835 ± 7
6 / Moisture Wight Fraction, %, no more than / 0,1
7 / Titanium Dioxide Wight Fraction,% / 0,020 ± 0,02
8 / No of COOH-groups, mol/kg, no more than / 30,0
9 / DEG Wight Fraction, %, no more than / 0,8
10 / Melting Point, °C / 261 ± 2

PET granules for fibre production

Nr. / Name of Characteristic / Value for S Grade
1 / Appearance and Color / Transparent to grey or yellow chips
2 / Size of Chips, mm / Not more than
(6,0х4,0х11)
3 / Dust Wight Fraction, %, no more than / -
4 / Uncut Chips Wight Fraction, %, no more than / 0,2
5 / Specific viscosity in dichloroacetic acid, units / 700 - 900
6 / Moisture Wight Fraction, %, no more than / 0,2
7 / Titanium Dioxide Wight Fraction,% / 0,0 - 0,5
8 / No of COOH-groups, mol/kg, no more than / -
9 / DEG Wight Fraction, %, no more than / -
10 / Melting Point, °C / -

PET granules for bottle production

Nr. / Name of Characteristic / Value for F Grade
1 / Appearance and Color / Transparent chips colorless to light blue
2 / Weight of 100 Chips, g / 1,80 - 2,20
3 / Dust Weight Fraction, %, no more than / 0,02
4 / Intrinsic Viscosity, dl/g / 0,58 - 0,64
5 / Moisture Weight Fraction, %, no more than / 0,1
6 / Color Difference in Units CIELAB MKO 1974 with d/10°, D65
L*, no less than:
a*, no less than:
b*, no less than: / 54,4
- 2,3 / + 0,3
+ 1,5
7 / Softening Point, °C / 255 ± 3
8 / DEG Weight Fraction, %, no more than / 1,8 - 2,2
9 / No of COOH-groups, millimole/kg, no more than / 30

Produktová rada č.4

PA6

PA66

PC

PC/ABS

MOSTEN

LITEN

Pavol Staník-STAPP

Vyšná Korňa 931

02321

SLOVAKIA

Phone: 00421907834223 Mr. Pavol Staník

Phone: 00421918300102 Mr.Marian Dej