*
Rep Reference Quote #
Customer:
Address:
Contact Name | Title | Dept:
Customer FAX | Phone:
QUTOTE
SPECIFICATIONS
*Component(s) of Interest / Ranges: / % / PPM / Other
*Background: (list all background components, min/norm/max):
Component: / Concentration (min|max|normal) / % / PPM / Other
*Sample Phase: / Gas: / Liquid: / Phase must be “single”
*Sample System: / By TAI / By Customer (attach piping diagram)
Preferred Materials of Construction:
*Inlet Sample Pressure (min|max|normal) / /
PSIG
/ /
ATM
/ / Other
*Return/outlet Pressure (min|max|normal) / /
PSIG
/ /
ATM
/ / Other
*Sample Temperature (min|max|normal) /
0F
/
0C
/ Other
Sample Dewpoint (min|max|normal) /
0F
/
0C
/ Other / H2Ov=
*Particulate Loading / NO / /
YES
/ MG/M3 / Other
*Particulate Loading / GRAINS/FT3
*Area Classification/Group
*If Div. II hazardous, is Z-purge acceptable? / YES / NO / Other
Control Unit: GENERAL / INTEGRAL /
REMOTE @ APPROX. DISTANCE
*Control Unit: LOCATION / INDOORS / OUTDOORS / Other
Control Unit:SIGNAL OUTPUT / SPECIFY:
Control Unit: ALARMS / HI, FS / LO, FS /
HI, NON/FS
/ LO, NON/FS
*Analyzer/Enclosure Mounting:
/ FREESTANDING / WALL / RACK / PANEL
Enclosure Dimensions: (MAXIMUM)
/ WIDTH / HEIGHT / DEPTH / CM / INCHES
*Ambient Temperature: (min|max|normal) / 0F / 0C / Other
Relative Humidity %
Utilities: / Cooling Water / YES / TEMP. / NO
STEAM / YES / TYPE / TEMP. / NO
Instrument Air: (-40 OC DEWPOINT) / YES /
PRESSURE
/
NO
*Power: / 110V, 60HZ / 220V, 50HZ / Other
Additional Comments:
PURPOSE OF INQUIRY: /

FEASIBILITY

/ BUDGETARY / COMPETITIVE BID
IMMEDIATE PURCHASE /

Other

* Required For Feasibility Form: ASI_W2008.doc, 11-29-08

In order to obtain a Quality System Design for the Customer:

Please Fill In the Appropriate Information:

1Electrical port size½” FNPT_____¾” FNPT_____ Metric_____ TAI Std____

2CertificationsUL_____ CSA____ ATEX____3rd Party____NEC____ NONE__

3Sample Moisturemin_____norm____ max____PPM____ %____ Other ____

4Ambient Conditions:Indoor____Outdoor____Sun____ Rain____Snow____

5Shelter Yes___NO_____

6Shelter temp controlAC_____Heater_____Both_____ TEMP min/max_____

7Mounting:Panel____Panel on Rack____Open Rack____ Enclosed Rack____ Nema Wall Mount____ N4F____

8NACEYES____NO____

Tubing only____Other______

9Sample coolerYes____NO______Unknown_____

10PaintTAI Std___Special Paint Required______

11Sampling Pump_____Eductor______Pressure available yes/no ______

12CondensatesH2Ov____Hydrocarbons______Precipitates______

What does customer know? Will condensates form when sample is withdrawn out of process? Yes____ No ____

13Special VendorsSwaglok____Parker_____Other______

14Wire TagsYes____NO____ TAI Std _____

15Special DrawingsCustomer Title BlockEuro drawing size TAI Std ______

16Special TagsInstrument______Other______TAI Std______

17CE MarkYes_____NO______

18Flow SwitchYes_____No_____

19Probe Box Area ClassGP____XP _____ATEX ____Other _____

List if known, i.e., xp I, I, B

20Sample System GP____XP _____ATEX ____Other _____

Area Class, list if different

21SoftwareYes_____No_____Special ______

What does it need to do? ______

______

22Comments/Notes: ______

______

______