REGISTER EARLY; Seminars Are Limited to 20 Students

2010 FACTORY

TRAINING PROGRAM

MVBSERVICESCHOOL

MVB & XTherm101COMMERCIAL BOILER SEMINARS

March25th

April 22nd

May 20th

June 24thSELECT DATE

October 14th

November 18th

MVBXTherm

REGISTER EARLY; Seminars are limited to 20 students

Registration $125.00

MVB101

The seminar covers only the MVB heaters, sizes 503-2003, used in Hydronic and hot water applications. The MVB is an infinitely modulating lox NOx heater capable of 4:1 turn down and has a minimum thermal efficiency certification of 87% (Cat IV). The seminartopics will include the design features,wiring schematics, start-up, and troubleshooting, plumbing and venting section. Seminar topics also include an in depth discussion of the sequence of operation for each heater. The new style on-board diagnostic board is an immense help in any troubleshooting.

XTherm 101

The seminar covers only the XTherm heaters, sizes 1005-2005, used in Hydronic, pool and hot water applications. The XTherm is an infinitely modulating lox NOx heater capable of 4:1 turn down and has a minimum thermal efficiency certification of 96% for boilers and 97% for water heaters (at full fire). The seminar topics will include the design features, wiring schematics, start-up, and troubleshooting, plumbing and venting section. Seminar topics also include an in depth discussion of the sequence of operation for each heater. The new style UDB board is an immense help in any troubleshooting.

The new style UDB board has the capacity to monitor 22 safeties and record up to 16 faults into the non-volatile memory. Also the wiring connection has completely changed from any previous diagnostic board used by Raypak.Thisshould be your biggest reason for attending the seminar.

The“hands-on” start-up and troubleshooting will take place during the last half of the day to ensure that everyone can troubleshoot the units as quickly and efficiently as possible.

The cost of the seminaris $125for the day.You will receive a copy of the training manual in the seminar. In addition to the manual, we also provide breakfast and lunch at noon. The seminar hours are 8:00 AM to 4:30 PM. A certificate of course completion is awarded at the end of seminar. Register early, as the seminar size is limited.

Seminar Location: RAYPAK factory, 2151 Eastman Ave., Oxnard, CA 93030 (Ventura map 523-A6)

Name(s):

PLEASE PRINT CLEARLY

Company:

Address:

City: State: Zip:

Telephone:Fax:

For further information please contact or send your registration to: Donna Stewart @ (805) 278-5302

Fax (805) 278-5495

YOUR PAYMENT IS REQUIRED TO SECURE A SEAT IN SEMINAR.

ABSOLUTELY NO REFUNDS FOR CANCELLATIONS WITHIN 5 DAYS OF THE SEMINAR DATE.