JOB HAZARD ASSESSMENT
Ranking Hazards: Low, Medium, High and Critical
**Ensure Personnel are adequately trained for task** **Ensure sign in on all site specific documents**
**Ensure pre-trip of equipment and attachments** **Complete Task Hazard prior to commencing Task**
Work Activity (Task) / Over all Ranking of Uncontrolled Hazards / Over all Ranking of Controlled Hazards / Date: October 3, 2017Packing / Medium / Low / JHA# / P-1
# / BASIC JOB STEPS / Existing & Potential Hazards / Ranking of Uncontrolled Hazards / STEPS TO ELIMINATE OR CONTROL HAZARDS / Ranking of Controlled Hazards
1 / Climbing onto machine / · Fall to a lower level
· Slippery ladder
· Contact with extreme temperature surfaces (hot or cold) / Low / · 3 point contact while ascending ladder
· Clean boots of snow, mud before climbing
· Knock visible ice or snow off ladder before climbing
· Wear gloves to access cab / Low
2 / Operating machine moving forward / · Contact with other equipment
· Multiple equipment working in the same area
· Contact with ground workers in area
· Contact with light duty vehicles in area
· Working around ditches/ slopes/ edge of lease
· Mechanical failure / leaks / spills
· Driving into cellar / Medium / · Be aware of surroundings in the immediate area.
· Be aware of equipment and vehicles moving into the work area
· Maintain a safe zone around ground workers in the area. Always allow extra room
· Radio contact should be maintained between all equipment working on the lease
· Ensure to stay appropriate distance from edges
· Report all spills or leaks immediately so they can be cleaned up promptly / Low
3 / Operating machine moving in reverse / · Contact with other equipment
· Multiple equipment working in the same area
· Contact with ground workers in area
· Contact with light duty vehicles in area
· Working around ditches/ slopes/ edge of lease
· Mechanical failure / leaks / spills
· Driving into cellar
· Blind spots / Medium / · Be aware of surroundings in the immediate area.
· Be aware of equipment and vehicles moving into the work area
· Maintain a safe zone around ground workers in the area. Always allow extra room
· Ensure to stay appropriate distance from edges
· Report all spills or leaks immediately so they can be cleaned up promptly
· Use a spotter if working in tight or congested areas where visibility is restricted or there is a risk of making contact with structures.
· It is always preferred to operate moving forward. Only operate in reverse if it is an absolute necessity. / Low
4 / Climbing off of machine / · Fall to a lower level
· Slippery ladder
· Contact with extreme temperature surfaces (hot or cold) / Low / · 3 point contact while descending ladder
· Wear gloves while descending ladder / Low