PRODUCT GUIDELINE SPECIFICATIONS
*************************
PRODUCT GUIDELINE SPECIFICATION
Australia & New Zealand
D&D Technologies
Unit 6, 4-6 Aquatic Drive
Frenchs Forest, NSW 2086
Tel: +61-2-9454 7888
Tel: 1800 500 203
Fax: (02) 9454 7600
E-mail:
North & South America
D&D Technologies
7731 Woodwind Drive
Huntington Beach, CA 92647
Tel: 800-716-0888
Tel: 714-677-1300
Fax: 800-464-6400
E-mail:
Europe
D&D Technologies B.V.
Niasstraat 1
3531 WR Utrecht
The Netherlands
Tel: +31 (0)30 291 98 47
Fax: +31 (0)30 291 99 98
E-mail:
PRODUCT GUIDELINE SPECIFICATION
Website: http://www.ddtechglobal.com/
GENERAL FORMATTING
This product guide specification is written according to the Construction Specifications Institute (CSI)
3-Part Format, including MasterFormat, SectionFormat, and PageFormat, as described in The Project Resource Manual – CSI Manual of Practice.
This Section must be carefully reviewed and edited by the Architect to meet the Project specific requirements and local building code. Coordinate this Section with other specification sections and the Drawings.
EDITING INSTRUCTIONS
Delete all “Specifier Notes” when editing this section.
Revise this Section by deleting, inserting, and revising text to meet Project specific requirements.
[TEXT] Indicates an option to be selected by specification writer. Select or delete option and brackets, and change text formatting to match adjacent text.
TEXT> Indicates information to be completed by specification writer. Complete text or delete text box, delete brackets, and change text formatting to match adjacent text.
1” – 2” (25-50mm) Imperial and (Metric) numbering. Retain or delete either according to project requirements.
UNREGISTERED TRADEMARKS AND REGISTERED TRADEMARKS
Unregistered Trademark (™) and Registered Trademark (®) symbols are not used to identify products identified in this Section by Product Name. For proprietary rights, and use of Trademarks associated with specific products contact D&D Technologies.
FULL LENGTH AND SHORTFORM SECTIONS AVAILABLE FROM D&D TECHNOLOGIES
Section 087110 [323110] Gate Latches and Locks
Section 087120 [323120] Gate Hinges
Section 087130 [323130] Commercial Hinges and Closers
Section 087140 [323140] Gate Accessories
PRODUCT GUIDELINE SPECIFICATION
Specifier Note: Select Section Numbers and Titles from options below. Change footer to match.
SECTION 087120 [323120] – GATE HINGES (Full Length Version)
PART 1 - GENERAL
1.1 SUMMARY
A. Section Includes: D&D Technologies Gate Hinges.
1. TruClose® Heavy Duty Hinge Products:
a. Standard (Series 3)
b. Alignment Legs (Series 3)
c. Heavy Duty Round Post
d. Multi-Adjust
2. TruClose® Regular Hinge Products:
a. Standard (Series 3)
b. Alignment Legs (Series 3)
c. Round Post
d. Mini-Multi Adjust
3. KwikFit® Polymer Hinge Products
a. KFS – Self-closing, Fixed tension
b. KFP – No spring, Plain pivoting
4. KwikFit® Aluminum Hinge Products
a. KF3 – Self-closing, tension adjustable, alignment ridges
b. KF3L2 – Self-closing, tension adjustable, 2 side fixing legs
c. KF3L2 – Self-closing, tension adjustable, wall & post mount
B. Related Sections:
Specifier Note: Retain subparagraph below for requirements Contractor might expect to find in this Section but are specified in other Sections.
1. Division 08 [32] Section “Gate Latches and Locks” for gate latches and locks.
2. Division 08 [32] Section “Commercial Hinges and Closers” for commercial hinges and closers.
3. Division 08 [32] Section “Gate Accessories” for gate accessories.
4. Division <##> Section "<Name>" for <Insert description of related requirements>.
1.2 SUBMITTALS
A. Product Data: Submit product data for each type of product used on project with full model number.
B. Hardware Schedule:
1. Submit hardware schedule detailing hardware to be provided at each opening for coordination with gates, frames and related work.
2. For load bearing hardware provide product information showing quantity and type of hardware recommended by manufacturer to safely carry weight of gate and other applied loads.
C. Installation Instructions: Submit manufacturer’s installation instruction for each hardware device. Mark installation instructions to indicate mounting heights for all operable hardware showing compliance with applicable codes requirements.
D. Warranty: Submit copy of manufacturer’s warranty for each product.
E. Extra Materials: At project closeout provide extra parts, accessories, and tools normally provided by manufacturer with installed hardware for maintenance and adjustment of installed hardware.
1.3 QUALITY ASSURANCE
A. D&D Technologies operates a fully accredited and internationally recognized ISO 9001 Quality Assurance System, which governs the design and manufacture of all our products.
1.4 WARRANTY
A. All TrueClose hinges – Limited lifetime warranty
B. All Kwikfit Polymer hinges – Limited lifetime warranty
C. All KwikFit Aluminum hinges – 2-year limited warranty
PART 2 - PRODUCTS
2.1 PRODUCTS
A. Products: Subject to compliance with requirements, provide the following D&D Technologies gate hinge products. No substitution.
Specifier Note: Select products from list below applicable to project.
B. TruClose Adjustable, Self-Closing Safety Gate Hinges:
1. TruClose safety gate hinges are injection-molded from super-strong engineering polymers and stainless steel construction that provides many years of reliable and rust free performance. They are UV stabilized so there is no color fade and can be used in all weather conditions.
2. Gates of different sizes and weights incur different loads, so the ability to adjust tension safely and easily is critical, especially in child safety areas. The unique, patented spring loaded adjustor allows for quick, incremental tension adjustment using only a screwdriver
3. TruClose hinges features a variety of sizes and designs to suit all fence materials. The Regular range is for smaller gates and the Heavy Duty range is for larger, heavier gates and high-traffic applications. Models are available for virtually every gate.
4. General Features and Benefits:
a. Self-closing and tension adjustable. No special tools required.
b. Meets international barrier / safety codes. Extremely reliable.
c. Super-strong engineering polymer and stainless steel construction.
d. Unique, patented tension adjustment.
e. Internal stainless steel spring.
f. UV-stabilized, "self-lubricating" material. Smooth closure.
g. No rusting, binding, sagging or staining.
h. Regular and heavy duty ranges. Fits most gate sizes.
i. Models with vertical and horizontal adjustment.
j. Models for metal, wood, vinyl and chain link.
k. Alignment leg models for quick installation and added strength.
l. Models available in black, white, chrome or brushed metal trim finishes.
m. Quality Assurance ISO 9001 manufacturer.
n. Limited Lifetime Warranty.
C. TruClose Heavy Duty Hinge Products
1. Series 3 Heavy Duty Standard Models:
a. Product Description:
1) TruClose Gate Hinges have long been the most reliable self-closing gate hinges on the market. The new “Series 3” range offers a unique, custom approach to gate hardware by introducing trim covers to match your locks and lighting fixtures, while concealing all fasteners.
2) TruClose Series 3 Heavy Duty models are designed for large, heavy gates as well as high traffic gates. They are ideal for both residential and commercial applications. All Series 3 Heavy Duty hinges will self-close gates up to 154 lbs (70kgs).
3) The Standard models do not have any side fixing legs although they do come with an alignment ridge to help align the hinges against corner of post.
4) Standard models are designed for both new gates and for retrofitting existing gates as they will fit gate gaps ranging from 1/4"- 1" (6-25mm). They carry a point load capacity of 990 lbs (450kgs).
5) No fasteners included. Use 12 gauge for Heavy Duty models.
6) NOTE: All Heavy Duty self-closing and point load ratings are based upon one pair of hinges on a gate size of 6’H x 4’W (1,830mmH x 1,220mmW).
b. Features and Benefits:
1) D&D patented tension adjustment is quick and easy.
2) Adjust tension from either end of hinge – Improves adjustment intuitiveness.
3) Increased performance over previous skus.
4) Decorative trim covers coordinate with LokkLatch Magnetic.
5) Optional metallic trim covers to match lighting and other yard accessories.
6) No visible fasteners – Improves beauty of the gate.
7) Designed for large, heavy and high traffic gates.
8) Self-closes gates up to 154 lbs (70kgs).
9) Point load capacity up to 990 lbs (450kgs).
10) No side fixing legs allow a wide gap variance.
11) Alignment ridge reduces installation time.
12) Optional safety cap for bottom hinge prevents children using as a toe hold.
Product Chart - TruClose Series 3 Heavy Duty Hinges - StandardPREVIOUS SKU / SKU / TRIM FINISH / GATE MATERIAL / SIDE LEGS / IDEAL GAP / GAP VARIANCE / MAXIMUM SELF-CLOSING WEIGHT / MAXIMUM POINT LOAD
TCHD1A-MK2 / TCHD1AS3BT / Black / Metal / No / 3/4" 19mm / 1/4" to 1" 6-25mm / 154 lbs
70 kgs / 990 lbs 450 kgs
TCHD1AWT-MK2 / TCHD1AS3WT / White / Metal / No / 3/4" 19mm / 1/4" to 1" 6-25mm / 154 lbs
70 kgs / 990 lbs 450 kgs
TCHD1AS3CT / Chrome / Metal / No / 3/4" 19mm / 1/4" to 1" 6-25mm / 154 lbs
70 kgs / 990 lbs 450 kgs
TCHD1AS3ST / Brushed / Metal / No / 3/4" 19mm / 1/4" to 1" 6-25mm / 154 lbs
70 kgs / 990 lbs 450 kgs
TCHD1-MK2 / TCHD1S3BT / Black / Metal, Wood, Vinyl / No / 3/4" 19mm / 1/4" to 1" 6-25mm / 154 lbs
70 kgs / 990 lbs 450 kgs
TCHD1S3CT / Chrome / Metal, Wood, Vinyl / No / 3/4" 19mm / 1/4" to 1" 6-25mm / 154 lbs
70 kgs / 990 lbs 450 kgs
TCHD1S3ST / Brushed / Metal, Wood, Vinyl / No / 3/4" 19mm / 1/4" to 1" 6-25mm / 154 lbs
70 kgs / 990 lbs 450 kgs
TCHDCAP / TCHDCAPS3 / Black / Safety Cap / - / - / - / - / -
c. Accessories:
1) Safety Cap: Optional Safety Caps are available for most TruClose hinge models. When installed on the bottom hinge, the Cap's steep "ramp" will deter a toddler from scaling the fence or reaching the latch. There are models for most Regular and Heavy Duty models.
2. Series 3 Heavy Duty Alignment Leg Models:
a. Product Description:
1) TruClose Gate Hinges have long been the most reliable self-closing gate hinges on the market. The new “Series 3” range offers a unique, custom approach to gate hardware by introducing trim covers to match your locks and lighting fixtures, while concealing all fasteners.
2) TruClose Series 3 Heavy Duty models are designed for large, heavy gates as well as high traffic gates. They are ideal for both residential and commercial applications. All Series 3 Heavy Duty hinges will self-close gates up to 154 lbs (70kgs).
3) Double alignment leg models (L2) provide quick alignment and double face fixing to both the gate and post reducing installation time and increased fixing strength. They are designed for new construction where a fixed gate gap of 3/4” (19mm) is allowed. L2 models carry a 1,100 lbs (500kgs) point load capacity.
4) Single alignment leg models (L1) provide the same benefits of the L2 models but with only one side fixing leg. This provides double face fixing on either the gate or post and gives the flexibility of gap variance found on the Standard models, 1/4"- 1" (6-25mm). L1 models carry a point load capacity of 990 lbs (450kgs).
5) TCHD2L1SS3 model has one alignment leg and slotted fixing holes on one side to provide horizontal adjustment during and after installation.
6) No fasteners included. Use 12 gauge for Heavy Duty models.
7) NOTE: All Heavy Duty self-closing and point load ratings are based upon one pair of hinges on a gate size of 6’H x 4’W (1,830mmH x 1,220mmW).
b. Features and Benefits:
1) D&D patented tension adjustment is quick and easy.
2) Adjust tension from either end of hinge – Improves adjustment intuitiveness.
3) Increased performance over previous skus.
4) Decorative trim covers coordinate with LokkLatch Magnetic.
5) Optional metallic trim covers to match lighting and other yard accessories.
6) No visible fasteners – Improves beauty of the gate.
7) Designed for large, heavy and high traffic gates.
8) Self-closes gates up to 154 lbs (70kgs).
9) Point load capacity up to 1,100 lbs (500kgs).
10) Alignment legs (L1-L2) reduce installation time and effort.
11) Alignment legs provide added fixing strength.
12) Optional safety cap for bottom hinge prevents children using as a toe hold.
Product Chart - TruClose Series 3 Heavy Duty Hinges – Alignment LegsPREVIOUS SKU / SKU / TRIM FINISH / GATE MATERIAL / SIDE LEGS / IDEAL GAP / GAP VARIANCE / MAXIMUM SELF-CLOSING WEIGHT / MAXIMUM POINT LOAD
TCHD1AL1-MK2 / TCHD1AL1S3BT / Black / Metal / 1 Leg / 3/4" 19mm / 1/4" to 1" 6-25mm / 154 lbs
70 kgs / 990 lbs 450 kgs
TCHD1AL1S3CT / Chrome / Metal / 1 Leg / 3/4" 19mm / 1/4" to 1" 6-25mm / 154 lbs
70 kgs / 990 lbs 450 kgs
TCHD1AL1S3ST / Brushed / Metal / 1 Leg / 3/4" 19mm / 1/4" to 1" 6-25mm / 154 lbs
70 kgs / 990 lbs 450 kgs
TCHD1AL2-MK2 / TCHD1AL2S3BT / Black / Metal / 2 Legs / Fixed at 3/4" 19mm / - / 154 lbs
70 kgs / 1,100 lbs 500 kgs
TCHD1AWTL2-MK2 / TCHD1AL2S3WT / White / Metal, Vinyl, Wood / 2 Legs / Fixed at 3/4" 19mm / - / 154 lbs
70 kgs / 1,100 lbs 500 kgs
TCHD1AL2S3CT / Chrome / Metal, Vinyl, Wood / 2 Legs / Fixed at 3/4" 19mm / - / 154 lbs
70 kgs / 1,100 lbs 500 kgs
TCHD1AL2S3ST / Brushed / Metal, Vinyl, Wood / 2 Legs / Fixed at 3/4" 19mm / - / 154 lbs
70 kgs / 1,100 lbs 500 kgs
TCHD1L2-MK2 / TCHD1L2S3BT / Black / Metal, Vinyl, Wood / 2 Legs / Fixed at 3/4" 19mm / - / 154 lbs
70 kgs / 1,100 lbs 500 kgs
TCHD1L2S3CT / Chrome / Metal, Vinyl, Wood / 2 Legs / Fixed at 3/4" 19mm / - / 154 lbs
70 kgs / 1,100 lbs 500 kgs
TCHD1L2S3ST / Brushed / Metal, Vinyl, Wood / 2 Legs / Fixed at 3/4" 19mm / - / 154 lbs
70 kgs / 1,100 lbs 500 kgs
TCHD2L1S-MK2 / TCHD2L1SS3BT / Black / Vinyl, Wood / 1 Leg / 3/4" 19mm / 1/4" to 1" 6-25mm / 154 lbs
70 kgs / 990 lbs 450 kgs
TCHD2WTL1S-MK2 / TCHD2L1SS3WT / White / Vinyl, Wood / 1 Leg / 3/4" 19mm / 1/4" to 1" 6-25mm / 154 lbs
70 kgs / 990 lbs 450 kgs
TCHD2L1SS3CT / Chrome / Vinyl, Wood / 1 Leg / 3/4" 19mm / 1/4" to 1" 6-25mm / 154 lbs
70 kgs / 990 lbs 450 kgs
TCHD2L1SS3ST / Brushed / Vinyl, Wood / 1 Leg / 3/4" 19mm / 1/4" to 1" 6-25mm / 154 lbs
70 kgs / 990 lbs 450 kgs
TCHD2L2-MK2 / TCHD2L2S3BT / Black / Vinyl, Wood / 2 Legs / Fixed at 3/4" 19mm / - / 154 lbs
70 kgs / 1,100 lbs 500 kgs
TCHD2WTL2-MK2 / TCHD2L2S3WT / White / Vinyl, Wood / 2 Legs / Fixed at 3/4" 19mm / - / 154 lbs
70 kgs / 1,100 lbs 500 kgs
TCHD2L2S3CT / Chrome / Vinyl, Wood / 2 Legs / Fixed at 3/4" 19mm / - / 154 lbs
70 kgs / 1,100 lbs 500 kgs
TCHD2L2S3ST / Brushed / Vinyl, Wood / 2 Legs / Fixed at 3/4" 19mm / - / 154 lbs
70 kgs / 1,100 lbs 500 kgs
TCHDCAP / TCHDCAPS3 / Black / Safety Cap / - / - / - / - / -
c. Accessories: