Practical Work Evidence Requirements

L3NVQ Diploma in Site Carpentry

Practical Work Evidence Requirements

QCF 09B -Installing Bespoke First Fixing Components in the Workplace
Install three of the following to given working instructions: / Tick each time you complete one of the tasks
bespoke frames (door and/or window)
shaped linings (door and/or hatch)
partitions (with openings and change of direction)
staircases (with turns)
QCF 10B -Installing Bespoke Second Fixing Components in the Workplace
Install five of the following to given working instructions: / Tick each time you complete one of the tasks
side hung doors (double or pairs)
ironmongery (in pair or sets)
mouldings (detailed architrave, skirting)
accessible service encasement
bespoke wall and floor units/fitments
panelling
stair components (balustrades, handrails, spindles with turns)
QCF 11v2 -Erecting Structural Carcassing Components in the Workplace
Erect one of the following to given working instructions: / Tick each time you complete one of the tasks
inclined roofs with gables
roof verge and eaves finishing’s
joists (ground, upper or flat roof), including coverings (flat roofs, decks or floors)
QCF 25v2 -Maintaining Non-structural or Structural Components in the Workplace
Repair and/or replace five of the following to given working instructions: / Tick each time you complete one of the tasks
frames (to include priming the repair)
mouldings (to include priming the repair)
floor joist covering (or flat roof)
door and/or window ironmongery
guttering and downpipes
sash cords
replacement glazing
structural joists (including support)
structural rafters (including support)
QCF 631 -Erecting Complex Roof Structure Carcassing Components in the Workplace
Erect two of the following to given working instructions: / Tick each time you complete one of the tasks
inclined roofs with hips and/or valleys
roof verge and eaves finishing’s
dormers
QCF 628 -Setting Up and Using Transportable Cutting and Shaping Machines in the Workplace
Set up and use three of the following cutting machines: / Tick each time you complete one of the tasks
Saw (three from the following: circular, chop, mitre, bench, jig,
reciprocating, alligator or scroll)
Drill
Morticer
Tenoner
Biscuit Jointer
Disc Cutter
Set up and use two of the following shaping machines:
Planer (thicknesser, surfacer)
Sander (orbital, belt, disc)
Router
Grinder