Polyamide from renewable raw materials
· BASF launching a polyamide 6.10 on the market
· The plastic called Ultramid BALANCE consists to over 60 % of castor oil
A material developed, produced and marketed by BASF over fifty years ago in the pioneering phase of engineering plastics is undergoing a renaissance. At K 2007, the world’s largest plastics exhibition, BASF is unveiling Ultramid® BALANCE, a polyamide 6.10. This is based to the extent of about 60 per cent on sebacic acid, a renewable raw material derived from castor oil.
“Given that interest in materials based on renewables has risen sharply in many markets we have decided to bring the product back into our range”, explains Kurt Hoefli, Head of Marketing for BASF’s Engineering Plastics in Europe. “We have woken it up from a long sleep because the subject of renewable raw materials has become important to our customers.” This established and now revitalized material combines a relatively low density for a polyamide with good low-temperature impact resistance and has great dimensional stability due to its low water absorption. Accordingly, it can be employed not only in classic PA 6 applications, but also wherever the use of PA 6 in the past has run up against limitations.
Castor oil – suitable for many plastics
Apart from Ultramid BALANCE BASF has another plastic in its portfolio that is produced in substantial measure from castor oil. BASF’s subsidiary Elastogran has already presented its new polyol Lupranol® BALANCE 50. This can be used for manufacturing slabstock foams for mattress production. Castor oil is obtained from the seed of the castor oil plant (Ricinus communis). It was in use for thousands of years as a medicine, but it has also long been used in engineering oils, cosmetics, coatings and in hydraulic oils. The principal regions where the castor oil plant is grown as a crop are India, Brazil and China.
You can obtain further information about BASF’s Ultramid® via the email address or telephone number +49 621 60-78780.
You can find a press photograph at www.basf.de/pressphotos under the heading “Kunststoffe” or using the search term “Ultramid”. You will soon be able to find this text and the photo in press release archive of BASF plastics: www.basf.de/plastics/pressreleases.