Paintworks Specification 6721TE - Interior new unpainted walls and ceilings

Page 2 of 2

Description area /

INTERIOR TIMBER, PLYWOOD PANELLING, HARDBOARD, MEDIUM DENSITY FIBREBOARD (MDF) PARTICLEBOARD: WALLS

Surface Preparation: Refer to Masterspec Section 6700W Wattyl Taubmans Painting General for product clauses
Valspar Paint (NZ) Ltd provides recommended generic coating systems for various applications. Some substrate manufacturers have their own recommended coating system. In these cases the substrate manufacturer's recommendations take precedence over the Wattyl Taubmans Granosite coating system and products must be selected to satisfy the substrate manufacturer's recommendations.
Cut and paste the coating system that meets to your requirements and paste into your Masterspec document
Coating type: Water based premium acrylic finish - low VOC
Gloss levels: ~
1st coat: Wattyl Interior Design i.d Acrylic Sealer Undercoat <1 gm/l
2nd coat: Wattyl Interior Design i.d <1 gm/l
3rd coat: Wattyl Interior Design i.d <1 gm/l
Type finish: Environmentally friendly
Gloss options: Eggshell, silk
Coating type: Water based premium acrylic finish
Gloss levels: ~
1st coat: Taubmans UnderProof Acrylic Primer Undercoat - 36 gm/l
2nd coat: Taubmans LivingProof - 51 - 63 gm/l
3rd coat: Taubmans LivingProof - 51 - 63 gm/l
Finish options: Eggshell, satin, silk, matt
Coating type: Water based premium enamel finish
Gloss levels: ~
1st coat: Taubmans UnderProof Acrylic Primer Undercoat - 36 gm/l
2nd coat: Taubmans UltraProof Acrylic Enamel 44 - 46 gm/l
3rd coat: Taubmans UltraProof Acrylic Enamel 44 - 46 gm/l
Finish options: Gloss, semi gloss, satin, eggshell
Coating type: Solvent based premium enamel finish
Gloss levels: Gloss
1st coat: Taubmans UnderProof Pigmented Sealer >300 gm/l
2nd coat: Taubmans Butex Gloss Enamel >300 gm/l
3rd coat: Taubmans Butex Gloss Enamel >300 gm/l
Coating type: Solvent based premium enamel finish
Gloss levels: ~
1st coat: Taubmans UnderProof All Purpose Undercoat > 300 gm/l
2nd coat: Taubmans Gaylon Enamel > 300 gm/l
3rd coat: Taubmans Gaylon Enamel > 300 gm/l
Finish options: Semi gloss, satin
Coating type: Clear finishes, premium water based finish
Gloss levels: ~
1st coat: Wattyl Estapol Speed Clear - 25 - 26 gm/l
2nd coat: Wattyl Estapol Speed Clear - 25 - 26 gm/l
3rd coat: Wattyl Estapol Speed Clear - 25 - 26 gm/l
Finish options: Gloss, satin
Coating type: Solvent based premium polyurethane finish Clear finishes
Gloss levels: ~
1st coat: Wattyl Estapol Sanding Sealer Hi-Build Clear > 300 gm/l
2nd coat: Wattyl Estapol Polyurethane Clear > 300 gm/l
3rd coat: Wattyl Estapol Polyurethane Clear > 300 gm/l
Finish options: Gloss, satin, matt
Coating type: Premium oiled finish Clear finishes
Gloss levels: Matt
1st coat: Wattyl Estapol Polyurethane Clear Matt > 300 gm/l
2nd coat: Wattyl Estapol Polyurethane Clear Matt > 300 gm/l
3rd coat: Wattyl Estapol Danish oil > 300 gm/l
Caution / Refer to Valspar Paints (NZ) Ltd, should full specifications be required, as this format is for use only in CIL Masterspec formatted documents/specifications.
As for all coatings, provide adequate ventilation during use.
Application should not be carried out if the air or substrate temperature is below 10°C or above 35°C, or the humidity is greater than 80%. The temperature must not fall below 10°C during the drying process.

1. This information is provided with respect to the listed Valspar products. Valspar recommends that:

(a) The user should check the date of printing, and if more than 24 months have elapsed, should verify with our nearest sales office that the information is still current. (b) you review the Technical Data Sheets (TDS) and Material Safety Data Sheets (MSDS) before you use or handle the product; (c) the product be used only in accordance with the information provided by Valspar; (d) the product be transported, stored and handled in accordance with the information on the MSDS and relevant TDS; and (e) you thoroughly test the product, using the recommended application method on a sample of intended substrate, before using the product.

2. The information in this technical data sheet was prepared using information gathered during product development. While Valspar endeavours to update this information and maintain the accuracy and currency of its contents, Valspar cannot guarantee that the information provided is wholly comprehensive.

3. Valspar recommends that you conduct such additional investigations as may be necessary to satisfy yourself of the accuracy, currency and comprehensiveness of the information on which you rely in using and handling the product. If you require further information please contact your nearest Valspar Office.

4. Because we cannot control the way these products may be used, or the conditions they may be exposed to, we can give no express guarantees in respect of these products or their performance. However certain guarantees may be implied by law.

Version 1.0 Reason for issue: New Issue Issued on: October 2013

Valspar Paint (NZ) Ltd, PO Box 1545, Shortland St, Auckland 1140. Phone 09 820 6700 Fax 09 820 6572