Name:______ID:______

Operations Management I 73-331 Fall 2004

OdetteSchool of Business

University of Windsor

Final Exam

Wednesday, December 15, 12:00noon – 3:00 p.m.

Ambassador Auditorium: Areas C,D,E,F,G

Instructor: Mohammed Fazle Baki

Aids Permitted: Calculator, straightedge, and 3 one-sided formula sheets.

Time available: 3 hours

Instructions:

  • This exam has 32 pages including this cover page, 1 blank page and 8 pages of Table
  • It’s not necessary to return tables and formula sheets
  • Please be sure to put your name and student ID number on each odd numbered pages
  • Show your results up to four decimal places
  • Show your work

Grading:

Question / Score / Question / Score
1 / /15 / 2 / /12
3 / /12 / 4 / /12
5 / /12 / 6 / /13
7 / /10 / 8 / /5
9 / /9 / Total / /100

Question 1: (15 points) Circle the most appropriate answer

1.1Forecasting is used in the context of

  1. make-to-order production system
  2. assemble-to-order production system
  3. make-to-stock production system
  4. all of the above

1.2MRP is used in the context of

  1. make-to-order production system
  2. assemble-to-order production system
  3. make-to-stock production system
  4. all of the above

1.3L4L performs best if

  1. holding cost is low
  2. ordering cost is low
  3. the costs change over time
  4. the costs do not change over time

1.4“Make sure you run out of inventory before you produce new components,” is a condition necessary to minimize cost in the context of

  1. MRP with capacity constraints
  2. MRP with no capacity constraints
  3. both
  4. none

1.5The essence of JIT is the willingness of the worker to

  1. produce as much as possible without halting the production at all
  2. specialize in a single function
  3. maximize the length of the time between maintenance
  4. none of the above

1.6If the rate of learning, is high, the learning is

  1. faster and the learning curve flatter
  2. faster and the learning curve steeper
  3. slower and the learning curve flatter
  4. slower and the learning curve steeper

1.7The following method is used for forecasting a stationary series

  1. Exponential smoothing
  2. Holt’s method
  3. Linear regression
  4. a and b

1.8Which of the following forecast series is expected to be the smoothest?

  1. A 4-period simple moving average
  2. A 8-period simple moving average
  3. An exponential smoothing method with
  4. An exponential smoothing method with

1.9Which of the following is not a part of the cost of hiring?

  1. Severance pay
  2. Cost of training
  3. Cost of advertising
  4. b and c

1.10In a level strategy, cumulative production

  1. equals cumulative demand
  2. is more than cumulative demand
  3. is less than cumulative demand
  4. none of the above

1.11Lead time is the amount of time between

  1. two successive order placement
  2. two successive updating of inventory on hand
  3. placing order and receiving delivery
  4. two successive capacity additions

1.12The motivation for holding inventory includes

  1. continuous improvement
  2. economies of scale
  3. better quality
  4. less capital required

1.13If three products A, B, C are produced in a rotation cycle policy, the following is a possible sequence

  1. A, B, C, B, C, A, C, A, B
  2. A, C, B, A, C, B, A, C, B
  3. A, B, C, A, B, C, B, B, B
  4. A, B, A, B, C, A, B, A, B

1.14The best inventory policy satisfying the Type 1 service objective

  1. is easier to compute than the best inventory policy satisfying the Type 2 service
  2. can accurately approximate a Type 2 service
  3. should be used in place of the best inventory policy satisfying the Type 2 service
  4. all of the above

1.15Which of the following is an overage cost?

  1. The cost per unit of positive inventory remaining at the end of the period
  2. The cost per unit of the unsatisfied demand
  3. The profit margin
  4. Depends whether backorder is allowed or not

Question 2: (12 points)

A major oil company is considering the optimal timing for the construction of new refineries. From past experience, each doubling of the size of a refinery at a single location results in an increase in the construction costs of about 75 percent. Furthermore, a plant of size 6,000 barrels per day costs $25 million. Assume that the annual demand for the oil is increasing at a constant rate of 1.5 million barrels yearly and the discount rate for future costs is 20 percent.

  1. (4 points) Find the values of and assuming a relationship of the form Assume that is in units of barrels per day.
  1. (4 points) Determine the optimal timing of plant additions and the optimal size and cost of each plant addition.

(Continued…)

  1. (4 points) Suppose that the largest single refinery that can be built with current technology is 7,500 barrels per day. Determine the optimal timing of plant additions and the optimal size and cost of each plant in this case.

Question 3: (12 points)

A popular brand of tennis shoe has had the following demand history by quarters over a two-year period.

Quarter
2003 / Demand / Quarter
2004 / Demand
1 / 15 / 1 / 20
2 / 25 / 2 / 35
3 / 75 / 3 / 80
4 / 50 / 4 / 60
  1. (4 points) Determine the seasonal factors for each quarter by the method of centered moving averages

(Continued…)

  1. (4 points) Compute the deseasonalized demand series. Using the method of linear regression, determine the slope and intercept of the straight line that best fits the deseasonalized series.

(Continued…)

  1. (4 points) Predict the demand of all quarters of 2005. Plot the original demand of 2003-2004 and predicted demand of 2005.

Question 4: (12 points)

A start-up firm has kept careful records of the time required to manufacture its product, a shutoff valve used in gasoline pipelines.

Cumulative Number of Units Produced, / Number of Hours Required for the Next Unit,
50 / 4
75 / 3.3
125 / 2.7
350 / 1.75
700 / 1.3
1500 / 0.95
  1. (2 points) Compute the logarithms of the numbers in each column. Use natural logs.
  1. (4 points) Graph the ln(hours) against the ln(cumulative units) and eyeball a straightline fit of the data. Using your approximate fit, estimate slope and intercept.

(Continued…)

  1. (4 points) Using the results of part (b), estimate the time required to produce the first unit and the appropriate percentage learning curve that fits these data.
  1. (2 points) Consider the learning curve derived in part (c). How much time will be required to produce the 2,000th unit, assuming the learning curve remains accurate.

Question 5: (12 points)

Green’s Buttons of Rolla, Missouri, supplies all the New Jersey Fabric stores with three different styles of buttons for men’s dress shirts. The plastic injection molding machine can produce only one button style at a time and requires substantial time to reconfigure the machine for different button styles. As Green’s has contracted to supply fixed quantities of buttons for the next four years, its demand can be treated as fixed and known. The relevant data for this problem are:

Button Type / Annual Sales / Production Rate (units/day) / Setup Time (hours) / Variable Cost
A / 30,000 / 500 / 5 / $0.30
B / 40,000 / 600 / 3 / $0.20
C / 15,000 / 400 / 8 / $0.40

Assume 8 hours in a day and 250 working days per year. Green’s accounting department established a 17 percent annual interest rate for the cost of capital and a 3 percent interest rate to account for storage space. Setup costs are $25 per hour required to reconfigure the equipment for a new style. Suppose that the firm decides to use a rotation cycle policy for production of the buttons.

  1. (5 points) What is the optimal rotation cycle time?

(Continued…)

  1. (2 points) How large should the lots be?
  1. (5 points) Compute the annual cost of holding and setups for each button type at the optimal solution. Compute the total annual cost of holding and setups at the optimal solution.

Question 6: (13 points)

Bobbi’s Restaurant in Boise, Idaho is a popular place for weekend brunch. The restaurant serves real maple syrup with French toast and pancakes. Bobbi buys the maple syrup from a company in Maine that requires three weeks for delivery. The syrup costs Bobbi $4 a bottle and may be purchased in any quantity. Fixed costs of ordering amount to about $75 for bookkeeping expenses and holding costs are based on a 20 percent annual rate. Bobbi estimates that the loss of customer goodwill for not being able to serve the syrup when requested amounts to $25. Based on past experience, the weekly demand for the syrup is normal with mean 12 and variance 16 bottles. For the purpose of your calculations, you may assume that there are 52 weeks in a year and that all excess demand is backordered.

  1. (5 points) How large an order should Bobbi be placing with her supplier for the maple syrup and when should the orders be placed? Find and .

(Continued…)

  1. (1 point) What level of Type 1 service is being provided by the policy you found in part a?
  1. (1 point) What level of Type 2 service is being provided by the policy you found in part a?
  1. (2 points) What policy should Bobbi use if the stock-out cost is replaced with a Type 1 service objective of 95 percent?

(Continued…)

  1. (2 points) What policy should Bobbi use if the stock-out cost is replaced with a Type 2 service objective of 95 percent? (You may assume an EOQ lot size.)
  1. (2 points) Suppose that Bobbi’s supplier requires a minimum order size of 500 bottles. Find the reorder level that Bobbi should use if she wishes to satisfy 99 percent of her customer demands for the syrup.

Question 7: (10 points)

Each unit of A is composed of two units of B and one unit of C. Each unit of B is composed of three units of C and four units of D. Items A, B and C have on-hand inventories of 40, 60 and 80 units respectively. Item B has a scheduled receipt of 50 units in period 1, and D has a scheduled receipt of 160 units in Period 1. Lot-for-lot (L4L) is used for Item A. Item B requires a minimum lot size of 50 units. Each of the Items C and D is required to be purchased in multiples of 100. Lead times are one period for each of the Items A, B and C, and two periods for Item D. The gross requirements for A are 20 in Period 3, 50 in Period 6, and 90 in Period 9. Find the planned order releases for all items to meet the requirements over the next 10 periods.

  1. (2 points) Construct a product structure tree.
  1. (2 points) Consider Item A. Find the planned order releases and on-hand units in period 10

Period

/ 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10
Item
A
LT=
1
Q=
L4L / Gross Requirements / 20 / 50 / 90
Scheduled receipts
On hand from prior period / 40
Net
requirements
Time-phased Net Requirements
Planned order releases
Planned order delivery

(Continued…)

  1. (2 points) Consider Item B. Find the planned order releases and on-hand units in period 10.

Period

/ 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10
Item
B
LT=
1
Q=
50 / Gross Requirements
Scheduled receipts / 50
On hand from prior period / 60
Net
Requirements
Time-phased Net Requirements
Planned order releases
Planned order delivery
  1. (2 points) Consider Item C. Find the planned order releases and on-hand units in period 10.

Period

/ 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10
Item
C
LT= 1
Q=
100 / Gross Requirements
Scheduled receipts
On hand from prior period / 80
Net
requirements
Time-phased Net Requirements
Planned order releases
Planned order delivery

(Continued…)

  1. (2 points) Consider Item D. Find the planned order releases and on-hand units in period 10.

Period

/ 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10
Item
D
LT=
2
Q=
100 / Gross Requirements
Scheduled receipts / 160
On hand from prior period
Net
requirements
Time-phased Net Requirements
Planned order releases
Planned order delivery

Question 8: (5 points)

A single inventory item is ordered from an outside supplier. The anticipated demand for this item over the next 7 months is 14, 12, 13, 15,10, 9, 8. Current inventory of this item is 5, and the ending inventory should be 6. Assume a holding cost of $2 per unit per month and a setup cost of $70. Assume a zero lead time. Determine the order policy for this item over the next 7 months.

Use the Silver-Meal heuristic.

Months / Q / I1 / I2 / I3 / I4 / I5 / I6 / I7 / Holding Cost / Ordering Cost
  1. (3 points) Use the table above to show your computation and summarize your order policy here:

(Continued…)

  1. (2 points) Use the table below to show the ending inventory that results from your order policy at the end of each of the 7 months:

Month

/ 1 / 2 / 3 / 4 / 5 / 6 / 7
Gross Requirements
Beginning Inventory
Net Requirements
Time-phased Net Requirements
Planned order Release
Planned Deliveries
Ending Inventory

Question 9: (9 points)

Consider Question 8 again. The question is re-written below:

A single inventory item is ordered from an outside supplier. The anticipated demand for this item over the next 7 months is 14, 12, 13, 15, 10, 9, 8. Current inventory of this item is 5, and the ending inventory should be 6. Assume a holding cost of $2 per unit per month and a setup cost of $70. Assume a zero lead time. Determine the order policy for this item over the next 7 months.

(3 points) Suppose that the maximum order size is 12 per month. Does there exist a feasible solution? If there does not exist a feasible solution, what is first month when there will be a shortage?

Consider Question 8 again. The question is re-written below:

A single inventory item is ordered from an outside supplier. The anticipated demand for this item over the next 7 months is 14, 12, 13, 15, 10, 9, 8. Current inventory of this item is 5, and the ending inventory should be 6. Assume a holding cost of $2 per unit per month and a setup cost of $70. Assume a zero lead time. Determine the order policy for this item over the next 7 months.

(3 points) Suppose that the maximum order size is 13 per month. Use lot-shifting technique to obtain a feasible solution (without using holding and setup cost). Show your final solution in the table given below.

Final answer to part . A feasible solution obtained by lot-shifting technique:

Month / 1 / 2 / 3 / 4 / 5 / 6 / 7
Actual Production

Consider Question 8 again. The question is re-written below:

A single inventory item is ordered from an outside supplier. The anticipated demand for this item over the next 7 months is 14, 12, 13, 15, 10, 9, 8. Current inventory of this item is 5, and the ending inventory should be 6. Assume a holding cost of $2 per unit per month and a setup cost of $70. Assume a zero lead time. Determine the order policy for this item over the next 7 months.

(3 points) Improve the solution obtained in Part . Assuming a maximum order size of 14 units per month and using the back-shifting technique, find another solution that has less total holding and setup cost than the solution obtained in Part . Show your final solution in the table given below.

Final answer to part . An improved solution:

Month / 1 / 2 / 3 / 4 / 5 / 6 / 7
Actual Production

Use this page, if necessary

1