A&E SPECIFICATIONS

OPENEYE CM-201INDOOR CAMERA

1. SUMMARY

1.01 The CM-201 camera shall be a low-cost, reliable mini-dome camera designed for indoor installations. The CM-201 camera shall have a 4mm to 9mm vari-focal lens. The CM-201 camera shall have a resolution of 500 Horizontal TV Lines in the NTSC video format. The camera shall be housed in an indoor ceiling mountable housing; it shall have a service monitor jack for easy in-ceiling adjustment. The CM-201 camera shall be compatible with the OpenEye Quick Mount system for easy ceiling installation. The CM-201 camera shall have a tool-less 3-axis positioning gimbal for easy positioning of the camera.

2. SPECIFICATIONS

2.01 SPECIFICATIONS

  1. The CM-201 camera shall have a 1/3” Sony SuperHAD CCD imaging sensor.
  2. The CM-201 camera shall have a Sony SS-11X digital signal processor (DSP).
  3. The CM-201 camera shall have an output signal that meets with the NTSC video signal standard.
  4. The CM-201 camera shall operate at a minimum illumination of 1.2 lux when at F1.6 (50 IRE).
  5. The CM-201 camera shall have Day / Night functionality.
  6. The CM-201 camera shall have a resolution of 500 TV Lines.
  7. The CM-201 camera shall have a signal to noise ratio of 48dB.
  8. The CM-201 camera shall have a vari-focal lens with a length of 4mm to 9mm.
  9. The CM-201 camera shall have a DC power driven auto-iris.
  10. The CM-201 camera shall have a video output of 1V peak to peak, with standard 75Ω termination.
  11. The CM-201 camera shall have an automatic white balance (AWB) feature with a range of 2500K to 9700K.
  12. The CM-201 camera shall have a backlight compensation (BLC) feature for the central area of the lens.
  13. The CM-201 camera shall have an Automatic Gain Control (AGC ) function

2.02 MECHANICAL

  1. The CM-201 camera shall have a weight of 0.6 lbs, or 0.27 kg.
  2. The CM-201 camera shall have the following dimensions:
  3. The camera’s bubble dome shall have a diameter of 3.9” (100mm).
  4. The camera’s bubble dome shall have a height of 2.1” (55mm).
  5. The camera’s housing shall have a diameter of 4.7” (120mm).
  6. The camera’s housing shall have a height of 1.9” (50mm).

2.03 ELECTRICAL

  1. The CM-201 camera shall operate using either 12vDC input or 24vAC (60Hz) power input.
  2. The CM-201 camera shall have a maximum power consumption of 3.2 watts.
  3. The CM-201 camera shall have ratedamperage of 0.27 amps when using 12vDC power and 0.13 amps when using 24vAC power.

2.04 ENVIRONMENTAL

  1. The CM-201 camera shall have an operating temperature range of 14°F to 122°F, or -10°C to 50°C.
  2. The CM-201 Cameras shall comply with part 15 of the Federal Communications Commission (FCC) emissions rules.

3. SUPPORT

3.01 SUPPORT

  1. The CM-201 Cameras shall come with an extensive support structure, including a 1-888 number for technical service, pre and post sales assistance, direct points of contact, and access to online sales and technical support.
  2. Technical Support shall be available 24 hours per day, seven days per week to all integrators and dealers free of charge.

3.02 WARRANTY

  1. The CM-201 cameras shall come with a 3 year warranty with the first year including advance replacement service.

4. SUPPORTED MODELS

4.01 List of supported Models

  1. The CM-201 Cameras shall be one of the following models.
  2. This document applies to the following models only.

CM-201 / Standard Definition Indoor Dome Camera

4.02 LIST OF SUPPORTED ACCESSORIES

  1. The following list of accessories is compatible with the OpenEye CM-201 cameras:

CA-200PMK / Pendant Mount
CA-200C / Corner Mount
CA-2004SM / Electrical Mount
CA-200W / Gooseneck Wall Mount
CA-200WM / Wall Mount
1 | 23221 E. Knox Ave. Liberty Lake, WA 99019 | Phone: 509.777.6702 / 29863 Rev AB