Justin Laing1

519-608-3379

Justin LaingBESc

Office: Robarts Research Institute, Western University

1151 Richmond St. N., London,Ontario, CanadaN6A5B7

Home: 79 Guildford Crescent, London, Ontario N6J 3Y3

Phone Number: 519-608-3378Email:

EDUCATION

MESc in Biomedical, Faculty of Engineering,Expected 2017

Western University, London, Ontario

Thesis:Patient Specific Atrial Models for Pre-Procedure Surgical Planning

Advisor: Terry Peters PhD

BESc in Mechanical, Faculty of Engineering, 2010-2015

Western University, London, Ontario

HONORS AND AWARDS

Dean’s List2012-13, 2014-15

Western University, London, Ontario

Western Research Graduate Scholarship2015-2017

Western University, London, Ontario

  • Valued at $12,000 Annually

AFFILIATIONS

  • Robarts Research Institute
  • Western University Canada

RESEARCH EXPERIENCE

Graduate Research Assistant 2015-2017

Robarts Research Institute, Western University, London Ontario

Supervisor: Terry Peters PhD

  • Developed the work flow for creating patient specific heart models for simulation of real patient anatomy
  • Performed technical writing and presentations to share information and collaborate with the scientific community

Fourth Year Capstone Design project2014-2015

Western University, London Ontario

Advisors: Timothy Burkhart PhD, Jim Johnson PhD

  • Project supported by the Fowler Kennedy Clinic and the Robarts Research Institute
  • Designed a mechatronic knee motion simulator capable of applying physiologically relevant loads to cadaveric knee joints within a CT scanner.
  • Tasks included: designing system using SolidWorks, performing design for manufacturing and design for assembly

TEACHING EXPERIENCE

Teaching Assistant

Mechanical Components Design,Western UniversitySpring 2016

Faculty of Mechanical and Mechatronics Engineering, Undergraduate

  • Supervised lab sessions for groups of 15 students, demonstrating the importance mechanical assemblies and components

Teaching Assistant

Engineering Thermodynamics, Western UniversityFall 2015

Faculty of Chemical and Biochemical Engineering, Undergraduate

  • Administered tutorial sessions for 90 plus students, reinforcing lecture material and aiding students with difficult concepts

PROFESSIONAL EXPERIENCE

Hudson Boat Works, London, On, Canada May-Aug 2015

Mechanical Engineer

  • Created Solidworks models and engineering drawings of existing products, developing the document control system, resulting in technicians being able to build parts with higher repeatability
  • Designed and modelled aluminum molds for the production of carbon fiber and silicone parts

Trudell Medical International, London, ON, Canada2013-2014

Engineering Intern

  • Worked in collaboration with professional engineers to design and test products confirming their safety and efficacy
  • Managed the set up and processing of 3D printed prototype designs, allowing for design decisions to be made more quickly
  • Developed testing fixtures and procedures that became standards for the technical services department, resulting in more consistent and accurate product evaluation

London Health Sciences Centre, University Hospital, London, ON, Canada2011-2012

Support Services Worker

  • Interacted with medical professionals, where I helped nurses and medical teams provide the best possible patient care to a wide variety of people with varying illnesses
  • Ensured medical equipment and supplies were easily accessible to nurses at each patient’s room, resulting in the reduced risk of cross contamination and promoted efficient and effective care

PROFESSIONAL MEMBERSHIPS
Society of Automotive Engineers2014-Present

CO-CURRICULAR ACTIVITIES

Western Engineering, Aero Design Club,

Team Captain2016-2017

  • Acted as team manager for over 30 engineering students, leading the team to the international SAE Aero Design competition
  • Collaborated with team leads to manage the teams vision and goals, resulting in an efficient and cohesive team
  • Worked to develop a team atmosphere, promoting communication, initiative, and character, resulting in a friendly and effective working environment

Design Lead2015-Present

  • Advisor to the manufacturing and business teams, responsible for ensuring projects are completed effectively and efficiently
  • Worked with other Design leads to design the plane and construction plans
  • Modeled the plane in Solidworks and used simulations to ensure optimal design

Member2014-2015

  • Worked to manufacture the plane and ensure the final product was within the design specifications
  • Followed testing procedures to verify the plane was fully functional before flight tests and to gather data regarding its performance

Saunders Swim Team,Saunders Secondary School2012

Volunteer Swim Coach

  • Created workouts and led practice sessions for swimmers in the advanced lane
  • Assisted individual swimmers in developing a better work ethic
  • Worked to create a team atmosphere and friendly environment

CERTIFICATIONS AND TRAINING

  • Dassault Systems, SolidWorks Associate2011
  • Ontario Triathlon Association, Triathlon Competitor 2008-present
  • National Life Saving Society, Life Guard2008-2010