Notes from 93rd Knowledge Seekers Workshop
(v3 2017-09-17) DRAFT (Transcription/notes has not been verified. Double check info with video)
Notes from KNOWLEDGE SEEKER WORKSHOP 93
December 24 2015.
The day before Xmas it was Ali in Vancouver who delivered the best Christmas present on his own birthday - the first one to crack the flight system condition although needing ab it of strengthening and adjustment here and there according to MK.
00:00:00 Rick Crammond intro
00:00:45 Intro by MK. Will cover basics of plasma covered so far. Good to see people exploring and experimenting in their own ways – its not just ‘monkey see – monkey do”!
00:04:00 Today and next week are days for recapping and adding to the knowledge.
00:04:30 Original explanation of the plasma was that it is expansional – it expands (draws a spiral going out clockwise)
The flow in the spiral (outwards or inwards) is the mean or average of the magnetic forces spiraling outwards and the gravitational forces spiraling
Gravitational is always more than magnetical. If the gravitational becomes too close to the strength of the magnetical, 00then you do not have a mass. The mass comes when the gravity increases
00:05:30 MK talks about the original reactors presented in 2005-2006. One had a black dome with a cap inside. The inside becomes the Caroline core and the outside becomes the outer core. Was trying to create two divisions of the strength of the fields. In some cases a rotation was (1) created in both clockwise (2) created in both anti-clockwise and (3) in certain cases one rotated clockwise and the other anti-clockwise.
00:06:29 In the end, it was not the physical rotation of the cores which counted. It is is the intreraction of the field strengths that creates the boundariesOne section created its own field (in green in the left diagram) and the other section created a second field (in blue in the left diagram)
00:09:00: However this is an invalid construct – planets and stars don’t have a central solid core and an outer core – in the center of the Earth there is an area that creates the GM field of the Earth – interaction of this field with the solar field creates all the life on the surface
0011:00: Taking the Magravs Power coil design, where the inner loop is the gravitational and the outer loop the magnetical. The fields strength of the coils are not due to the physical matter of the copper and nano material of the coils. It is the interaction with the nano-coated material of the inner gravitational coil and with the nanocoated outer magnetical coil that creates the field flow.
00:12:15 I you make a cross section on your copper coils you will see the structure of the planet with inner and outer core, the structure of the sun/star, the structure of the creation of the Universe.
00:13:00: Are we in the inner or outer/ magnetic or gravitational field of our galaxy? There is a reason MK asks this. A lot of you have followed the path along the way – made ping pong ball, various coils, reactors, and we all followed the procedure to understand.
00:14:25: What we come down to is this: Does the drawing above show us everything we have done in the last years – or have we missed a very big part?
00:15:40: This structure of the Earth is the structure of everything we have done in the teachings – we just changed the tools and elements. This was the first Iranian rector 8 years ago, this was the first structure we did in Belgium 12 years ago, the same as the little gas balls you made, same when you added gansing – same structure as planet Earth and Sun, same structure as your coils (x-section) – nothing has changed – it is all creating a gravitational section and cascading it with an outer section.
00:17:00 What about if we use nano-coated and GANS coated copper and aluminium instead? Will it be a more effective GM field? What if aluminium outside and copper inside? What about brass on the inside and copper on the outside? If you put a composite Gans, brass inside and copper outside? Extend the knowledge to where the central core is your Magrav set and outside becomes your house. Can we create a system where the interaction of the coils creates a position within the house where there is no need for wiring and just work with field interactions. Teaching is to inspire: not monkey sees, monkey does.
00:18:30: Starts a new page: You created a ping pong ball reactor. A motor was put on it and rotated. The matter part of the plasma
was contained within the structure of the plasma.
00:19:20 You created a star formation and saw the effect of the fields to create a free plasma.
You created copper coils and connected them seeing return on the power supply.
00:19:50 So far, with the exception of the star formation, have always contained the plasma with elements of the matter part of the plasma. Is there a way where we can create a plasma which itself can hold itself… create a field force that itself creates its own containment?
00:20:30 Explains how the motion in the rotation of the plasma is created by equatorial rotation (green in diagram) or by polarity rotation (black in diagram). The interaction of these 2 field forces leads to the rotation of the physical plasma.
The equator line (blue in diagram) is where the maximum amount of fields is absorbed inside by the plasma
MK shows on diagram that the counter clockwise rotation on black line is the gravitational absorption, and the clockwise rotation on black line is the magnetical absorption/repulsion
00:21:45 Assumption so far is that because the equator is in the direct line of the sun, it is where the earth gets the maximum heat due to its facing the sun. This is flawed
The equatorial line (green in diagram) is always the most heated part of any element, of any plasma because it is where the two fields (in diagram above) always interact
The rotational polarity (black line and arrows) and the equatorial rotation of magnetical (green lines and arrows) in the field strength creates the heat (in blue in the diagram). In respect to where the heat sits and how it is distributed leads to the temperature gradient which partially leads to what we call the heating of the earth and its system.
00:24:20 This is important because in the future, when you start working totally with the plasma, you cannot ignore the equatorial heating line which comes from the rotational diagonal of the polarity and the equator.
00:25:15 MK takes a double coil setup just received from the Phillipines and shows how one can take the central gravitational coil and rotate it to where it is 90 degrees across the outer coil. This is the way to create the free plasma in the middle. You have control of this plasma: can dictate its power and decide how it moves. The plasma created in the center is the exact copy of the plasma of the universe
MK shows a double coil setup just received from the Phillipines.– shows how one can take the central gravitational coil and rotate it to where it is 90 degrees across the outer coil. This is the way to create the free plasma in the middle. Also remember that each of the inner and outer coils have both mag and grav.
00:31:15: The 3 stacker system has a similar effect with longitudinal and equatorial fields creating free plasma in the center.
00:37:45: With the star formation you created free plasma – with the two coils at 90 degrees to each other you control it. No rotation or physical structure is needed. With this the elusive lift is possible. This allows man to be brought into space
00:43:00 If you take 4 stackers and position them as above, you will find that you reach a point where you can lift. If you can get the field right, you can then get other materials to also lift without ever being made into the structure or frame of the system.
00:44:50 Makes parallel between star formation reactor and the physicality, emotion and soul of man. Next step will be zero-time communication
00:46:00
0058: Question: John from BC: Is the spacing important in this new configuration? MK: You can use the 3-stacker system at each of the tetrahedral points as well, the middle layer stabilizes the system. Heliun and Hydrogen are 3 stacker systems and that’s why they are stable/inert.
0101: Question: Could you create a similar plasma system with use of Alekzs bead configuration? MK: Yes…
0105: Discussion with Brett about huge energy release from plastic coils as they contain H. You are on the right track Bratt – but understand what you are doing!
0109: Question: How to nano coat plastic? MK circles around the question and says caustic is Na O and H – you have the H+ also in the plastic and you have the C from the plastic – you have the free Oxygen from the caustic – Rick remembers how the coke bottle necks would dissolve before the rest of the bottles…
0112: E=MCsquared asks about using a soup of Gans versus using different layers of different Gans: MK you can try both
0105: Sandor: We saw beautiful 3D drawings on Rick’s plasma group 24 hours ago. Discussion ensues about the 3D rendition of the split capacitor system – shows picture… is this correct – maybe better to get it correct before drawing it? MK says he will throw a spanner in the works and asks what would happen if you put a 3rd coil in the middle of the split capacitor?
0122: Douglas: Says he has achieved lift of a piece of Iron in Nickel Gans solution.
0132: Douglas’s video of this phenomenon entitled “Magnetic anomaly in Nickel Gans!!”
0140: Discussion about further experiments to further define the anomaly. MK wonders if there is iron in the stainless steel forceps? Doug says no he has never had any magnetic effect =from the SS surgical forceps in the years he has been using them. Brett remembers he and Vince did the same thing causing increased attraction to a straw or even a hand/finger – attraction/repulsion – gans/nano materials
0143: MK answers Douglas’s question from 0127: about the white chunky material that appears on the bottom when he tried to produce Zinc oxide or CO2 Gans – MK explains that the blocks of white stuff at the bottom are most likely Calcium. CO2 Gans is white powder, Zinc oxide is white similar to CO2 but slightly different white. Aluminium is a gluey gooey white. CH is orange. ZnO2 has molecular weight 60 +16 + 16 = 92. The field inside the zinc and copper plates attracts carbon and then you get transmutation of ZnO2 to 2 calcium atoms + Carbon = 40 + 40 + 12 also = 92.
0149: MK has been waiting to explain this for a while. Wherever you find solid residue you have used a high power – you did not put an LED or load on the wire between the zinc and copper plates and you will create ZnO2 Gans. If you put an LED or load on you create CO2 Gans. The new CO2 kits from Italy all have an LED on them. If you want to create ZnO2 you can take the LED out – when you see solid residue on the bottom that is Calcium. The body creates bone from Zinc (connected to emotional part) and bone creates immune system to guarantee survival of the emotional part. In the same way shellfish create their shells from calcium.
0151: Video from Ali in Vancouver: He has created a 15 stacker system with 6 in the middle and 3x 3stackers at 120 - ie a T120 arrangement.
0153: MK: you have created the first lift system! Next you will see a shimmer! Adjust the field flow and you will see your spaceship. This is the same as using 5 of our magrav systems.
0154: MK: Instead of powering it from the grid use your capacitors.
0155: Ali comments that he put the crystal dust into the Gans
0157: MK: if you see s shimmer in the shape of a dome you have created your spaceship. Good to see it done and not by an Iranian!
0159: Ali comments he has arranged the plasma from bottom to top heavy medium light heavy medium light in the 6 stacker core and the 3 stacker units.
0200: MK: You have to learn how to strengthen the center field and the connections and don't link up the 2 3 stackers in the centre.
0202: You have to fix or lock the system to a plate with batteries in parallel to each other.
0208: Ali comments that his ratio for his coils is 89 – 144, golden ratio. MK: Your stacker systems have to open up slightly and connect gravitational from peripheral stackers to the center. You will see first a shimmer then you wont see your system any more. This is the right track. Make sure your connecting wires don’t touch the floor.
0214 Alekz is developing a wireless plasma system in his home, in which he will no longer need any wires…
0222: More details for Ali: Make the fields feed themselves – no leakage – connect the gravitational system at the bottom of the 3 units to the bottom of the central column and the magnetical from the 3 to the center on top. You should see a white silverfish bubble that suddenly connects to the 3 and you will see your ship.
0226: Rick comments on Ali’s birthday – the day before Christ’s birthday – kind of a spoiler! (Lol)
0239: More instructions: Lock the system with Perspex plates but don’t let the bottom plate touch the ground- have some legs (eg stainless steel bolts seen on some stacker systems with clear Perspex) – then you will see the fields . Listen to a radio close by all the time and it will give you information like we discovered at Descanzano – it will give you information about the field expansion – you need to listen to both AM and FM