SECTION 07 31 00

SHINGLES

Copyright 2013 - 2014 ARCAT, Inc. - All rights reserved

** NOTE TO SPECIFIER ** Malarkey Roofing Products; commercial and residential roofing.
.
This section is based on the products of Malarkey Roofing Products, which is located at:
3131 N. Columbia Blvd. P. O. Box 17217
Portland, OR 97217
Toll Free Tel: 800-545-1191
Tel: 503-283-1191
Fax: 503-289-7644
Email:request info ()
Web:
[Click Here] for additional information.
Since 1956, Malarkey Roofing Products has operated as a family owned, professionally managed, privately held company, headquartered in Portland, Oregon.
At Malarkey Roofing, we believe in creating long-term value for our customers and business partners. Our commitment challenges us to find and improve the ways we manufacture products to support our customer's needs. Striving for excellence propels our company to new heights in polymerization and the development of long lasting products.
Maintaining our commitment to dependable roofing products is the vital key to our future success. Malarkey Roofing Products is not satisfied to rest on our past accomplishments and accolades. Our goal is to make products that improve people's lives and balance environmental and economic interests.

PART 1 GENERAL

1.1 SECTION INCLUDES

** NOTE TO SPECIFIER ** Delete types not required.

A. High profile laminated asphalt shingles.

1. Highlander-CS.

2. Highlander-CS Scotchgard™ .

3. Legacy.

4. Legacy Scotchgard.

5. Northwest-XL.

6. Northwest-XL Scotchgard.

B. 3-tab asphalt shingles.

1. Dura-Seal 20.

2. Dura-Seal 25 AR.

3. Dura-Seal 25.

4. The Alaskan.

C. Solar reflective asphalt shingles.

1. Ecoasis Premium Scotchgard.

D. Underlayment and accessories.

E. Vented nailbase insulated panels.

1.2 RELATED SECTIONS

** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.

A. Section 02 41 13 - Selective Site Demolition.

B. Section 06 10 00 - Rough Carpentry.

C. Section 07 61 00 - Sheet Metal Roofing.

1.3 REFERENCES

** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.

A. American Society of Testing and Materials International (ASTM):

1. ASTM C 209 - Standard Test Methods for Cellulosic Fiber Insulating Board.

2. ASTM C 1289 - Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board.

3. ASTM D 226 - Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing.

4. ASTM D 1621 - Standard Test Method for Compressive Properties Of Rigid Cellular Plastics.

5. ASTM D 2126 - Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging.

6. ASTM D 3018 - Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules.

7. ASTM D 3161 - Standard Test Method for Wind-Resistance of Asphalt Shingles (Fan-Induced Method).

8. ASTM D 3462 - Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules.

9. ASTM D 4586 - Standard Specification for Asphalt Roof Cement, Asbestos-Free.

10. ASTM E 84 - Standard Test Method for Surface Burning Characteristics of Building Materials.

11. ASTM D 7158 - Standard Test Method for Wind Resistance of Asphalt Shingles (Uplift Force/Uplift Resistance Method).

12. ASTM E 96 - Standard Test Methods for Water Vapor Transmission of Materials.

13. ASTM E 108 - Standard Test Methods for Fire Tests of Roof Coverings.

B. Intertek Testing Services (ITS) - Fire Resistance Directory, Current Edition.

C. Underwriters Laboratory (UL):

1. UL 790 - Standard Test Methods for Fire Tests of Roof Coverings.

2. UL 2218 - Impact Resistance of Prepared Roof Covering Materials.

1.4 SUBMITTALS

A. Submit under provisions of Section 01 30 00 - Administrative Requirements.

B. Product Data: Manufacturer's data sheets on each product to be used, including:

1. Preparation instructions and recommendations.

2. Storage and handling requirements and recommendations.

3. Installation methods.

** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.

C. Samples for Selection: For the following products, of sizes indicated: For each product specified, two complete sets of color samples representing manufacturer's full range of available colors and patterns.

1. Asphalt shingles: Full size.

2. SBS Modified Fiberglass Ridge and Hip Cap Shingles: Full size.

3. Synthetic Underlayment: 12 inches (305 mm) square.

4. SBS Modified Self-Adhering Fiberglass Reinforced Underlayment: 12 inches (305 mm) square.

5. Nail used for fastening shingles: 5 of each nail type and size.

6. Vented Nailbase: 12 inches (305 mm) square.

D. Samples for Verification: For the following products, of sizes indicated: For each product specified, two samples representing actual product, color, and patterns.

1. Asphalt shingles: Full size.

2. SBS Modified Fiberglass Ridge and Hip Cap Shingles: Full size.

3. SBS Starter Shingles: Full size.

4. Synthetic Underlayment: 12 inches (305 mm) square.

5. SBS Modified Self-Adhering Fiberglass Reinforced Underlayment: 12 inches (305 mm) square.

6. Nail Used for Fastening Shingles: 5 of each nail type and size.

7. Vented Nailbase: 12 inches (305 mm) square.

1.5 QUALITY ASSURANCE

A. Primary Roofing Materials Manufacturer Requirements:

1. Manufacture specified asphalt shingles for a minimum of ten years.

2. Manufacturer shall be an associate member in good standing of either the National Roofing Contractor's Association (NRCA), Western States Roofing Contractors Association (WSRCA) or the Midwest Roofing Contractors Association (MRCA).

B. Installer Qualifications: Approved by the manufacturer to install the specified products and provide the specified warranties.

C. Source Limitations: Obtain ridge and hip cap shingles, starter, synthetic and self-adhering sheet underlayment, insulation and vented nailbase from single source, from single manufacturer.

D. Fire-Resistance Characteristics: Where indicated, provide asphalt shingles and related roofing materials identical to those of assemblies tested for fire resistance per test method below by UL or another testing and inspecting agency acceptable to authorities having jurisdiction. Identify products with appropriate markings of applicable testing agency.

E. Exterior Fire-Test Exposure: Class A; ASTM E 108 or UL 790, for application and roof slopes indicated.

** NOTE TO SPECIFIER ** Delete if not required.

F. Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application workmanship.

1. Finish areas designated by Architect.

2. Do not proceed with remaining work until workmanship, color, and sheen are approved by Architect.

3. Refinish mock-up area as required to produce acceptable work.

1.6 DELIVERY, STORAGE, AND HANDLING

A. Store products in manufacturer's unopened packaging until ready for installation.

B. Store and dispose of solvent-based materials, and materials used with solvent-based materials, in accordance with requirements of local authorities having jurisdiction.

1.7 PROJECT CONDITIONS

A. Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.

1.8 PROJECT MEETINGS

A. Pre-Construction Meeting:

1. Prior to the start of the roofing project, the Owner will hold a job-site meeting and roof tour to review the scope of work.

2. Authorized representatives of the Owner, the Roofing Contractor (Project Superintendent), the asphalt shingle manufacturer, other Subcontractors whose work complements, penetrates, or is mounted on the roof or will use the roof as a work platform, will be in attendance.

3. The agenda for the meeting shall include:

a. A review of the submittals.

b. Distribution of approved submittals.

c. A walkover inspection of the roof.

d. Establishment of a schedule for the work.

e. Selection of staging and storage locations.

B. Final Inspection: Following the completion of the Work, a Final Inspection shall be scheduled by Owner's Representative. Any uncompleted work shall be noted on a Punch List. Final Payment shall be made only after Punch List is completed.

1.9 WARRANTY

A. Standard Warranty: Shingles subjected to terms and conditions of the standard Manufacturer's Limited Warranty. Wind warranty coverage is subject to the shingles being sealed.

** NOTE TO SPECIFIER ** Delete warranty lengths not required.

1. Warranty Length: 20 years

2. Warranty Length: 25 years.

3. Warranty Length: 30 years.

4. Warranty Length: 35 years.

5. Warranty Length: 40 years.

6. Warranty Length: 50 years.

** NOTE TO SPECIFIER ** Delete wind speeds not required.

7. Limited Term Resistance to Wind: 60 mph (97 kph).

8. Limited Term Resistance to Wind: 70 mph (113 kph).

9. Limited Term Resistance to Wind: 80 mph (129 kph).

10. Limited Term Resistance to Wind: 100 mph (161 kph).

11. Limited Term Resistance to Wind: 110 mph (177 kph).

12. Limited Term Resistance to Wind: 120 mph (193 kph).

13. Limited Term Resistance to Wind: 130 mph (209 kph).

** NOTE TO SPECIFIER ** Delete if not required.

14. Algae Resistance (AR): The warranty shall include 3M Scotchgard Algae Resistance to discoloration from algae growth for a period of 20 years from the date of substantial completion.

** NOTE TO SPECIFIER ** Delete if no SBS shingles or if not required.

B. Special Warranty for SBS Shingles: Manufacturer's standard or customized form, without monetary limitation (NDL), in which manufacturer agrees to repair or replace components of asphalt shingle roofing system that fail in materials or workmanship within specified warranty period.

1. Special warranty shall include asphalt shingles, flashings, roof insulation, nail base, and other components of roofing system.

** NOTE TO SPECIFIER ** Delete warranty lengths not required.

2. Warranty Length: 5 years from date of Substantial Completion.

3. Warranty Length: 10 years from date of Substantial Completion.

4. Warranty Length: 15 years from date of Substantial Completion.

C. Upon project completion and acceptance by Owner, the Roofing Contractor shall promptly provide executed copies of the specified warranties.

D. Furnish a list containing the names and contact telephone numbers of the Roofing Contractor's Service Manager, Superintendent, and Project Manager and the Roofing Contractor's current mailing address.

PART 2 PRODUCTS

2.1 MANUFACTURERS

A. Acceptable Manufacturer: Malarkey Roofing Products, which is located at: 3131 N. Columbia Blvd. P. O. Box 17217 ; Portland, OR 97217; Toll Free Tel: 800-545-1191; Tel: 503-283-1191; Fax: 503-289-7644; Email:request info (); Web:

** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.

B. Substitutions: Not permitted.

C. Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.

** NOTE TO SPECIFIER ** Delete if not required.

2.2 SHINGLES

** NOTE TO SPECIFIER ** Delete if not required.

A. High Profile Laminate Shingles:

** NOTE TO SPECIFIER ** Delete shingle not required.

1. Highlander-CS (271) as manufactured by Malarkey Roofing Products.

a. The Malarkey Highlander-CS shingles hold a Class ' A' Fire Rating.

b. As manufactured, Highlander-CS meets the requirements of:

1) ASTM D7158 Class H, ASTM D3462, ASTM D3161 Class F, ASTM D3018 Type I, ASTM E108 Class A, and CSA A123.5.

2) ICC Approval - ESR 3150.

3) FBC Approval - #14809.

c. Performance:

1) 30 Year Limited Material Warranty.

2) 70 mph (113 kph) Limited Wind Warranty.

3) 110 mph (177 kph) Enhanced Wind Warranty Available.

4) Your Choice Warranty Program.

5) 10 years Right Start Warranty.

2. Highlander-CS Scotchgard (277) as manufactured by Malarkey Roofing Products.

a. The Malarkey Highlander-CS Scotchgard shingles hold a Class ' A' Fire Rating.

b. As manufactured, Highlander-CS Scotchgard meets the requirements of:

1) ASTM D7158 Class H, ASTM D3462, ASTM D3161 Class F, ASTM D3018 Type I, ASTM E108 Class A, and CSA A123.5.

2) ICC Approval - ESR 3150.

3) FBC Approval - #14809.

c. Performance:

1) 30 Year Limited Material Warranty.

2) 70 mph (113 kph) Limited Wind Warranty.

3) 110 mph (177 kph) Enhanced Wind Warranty Available.

4) Highlander-CS Scotchgard; 20 year Scotchgard Algae Resistance Warranty.

5) Your Choice Warranty Program.

6) 10 years Right Start Warranty.

3. Legacy (272) as manufactured by Malarkey Roofing Products.

a. The Malarkey Legacy shingles hold a Class ' A' Fire Rating.

b. As manufactured, Legacy meets the requirements of:

1) ASTM D3018 Type 1; ASTM D3161 Class F; ASTM D3462; ASTM D7158 Class H; ASTM E108 Class A; UL 2218 Class 4 Impact Resistance; CSA A123.5.

2) ICC Approval - ESR 3150.

3) FBC Approval - #14809.

c. Performance:

1) 50 Year Limited Material Warranty.

2) 110 mph (177 kph) Limited Wind Warranty.

3) 130 mph (209 kph) Enhanced Wind Warranty Available.

4) Your Choice Warranty Program.

5) 12 year Right Start Warranty.

4. Legacy Scotchgard (273) as manufactured by Malarkey Roofing Products.

a. The Malarkey Legacy Scotchgard shingles hold a Class ' A' Fire Rating.

b. As manufactured, Legacy meets the requirements of:

1) ASTM D3018 Type 1; ASTM D3161 Class F; ASTM D3462; ASTM D7158 Class H; ASTM E108 Class A; UL 2218 Class 4 Impact Resistance; CSA A123.5.

2) ICC Approval - ESR 3150.

3) FBC Approval - #14809.

c. Performance:

1) 50 Year Limited Material Warranty.

2) 110 mph (177 kph) Limited Wind Warranty.

3) 130 mph (209 kph) Enhanced Wind Warranty Available.

4) Legacy 20 years Scotchgard Algae Resistance Warranty.

5) Your Choice Warranty Program.

6) 12 year Right Start Warranty.

** NOTE TO SPECIFIER ** Delete if not required.

5. Northwest XL (270) as manufactured by Malarkey Roofing Products.

a. As manufactured, Northwest XL meets the requirements of:

1) ASTM D3018 Type I, ASTM D3161 Class F, ASTM D3462, ASTM D7158 Class H, ASTM E108 Class A, and CSA A123.5.

2) ICC Approval - ESR 3150.

3) FBC Approval - #14809.

b. Performance:

1) 40 Year Limited Material Warranty.

2) 80 mph (129 kph) Limited Wind Warranty.

3) 110 mph (177 kph) Enhanced Wind Warranty Available.

4) Your Choice Warranty Program.

5) 10 year Right Start Warranty.

** NOTE TO SPECIFIER ** Delete if not required.

6. Northwest XL Scotchgard (269) as manufactured by Malarkey Roofing Products.

a. As manufactured, Northwest XL Scotchgard meets the requirements of:

1) ASTM D3018 Type I, ASTM D3161 Class F, ASTM D3462, ASTM D7158 Class H, ASTM E108 Class A, and CSA A123.5.

2) ICC Approval - ESR 3150.

3) FBC Approval - #14809.

b. Performance:

1) 40 Year Limited Material Warranty.

2) 80 mph (129 kph) Limited Wind Warranty.

3) 110 mph (177 kph) Enhanced Wind Warranty Available.

4) Northwest XL Scotchgard 20 years Scotchgard Algae Resistance Warranty.

5) Your Choice Warranty Program.

6) 10 year Right Start Warranty.

** NOTE TO SPECIFIER ** Delete if not required.

B. Traditional 3-Tab Shingles:

** NOTE TO SPECIFIER ** Delete if not required.

1. Dura-Seal 20 as manufactured by Malarkey Roofing Products.

a. As manufactured, Dura-Seal 20 meets the requirements of:

1) ASTM D3018 Type I, ASTM D7158 Class H, ASTM E108 Class A, and CSA A123.5.

2) Listed with UL and CRRC.

b. Performance:

1) 20 Year Limited Material Warranty.

2) 60 mph (97 kph) Limited Wind Warranty.

3) 3 Year Right Start Warranty.

4) Dura-Seal; 20 Dove White is CRRC Listed & Title 24 Compliant.

5) 3M Colorfast Granules.

** NOTE TO SPECIFIER ** Delete if not required.

2. Dura-Seal 25 as manufactured by Malarkey Roofing Products.

a. As manufactured, DuraSeal 25 meets the requirements of:

1) ASTM D3018 Type I, ASTM D7158 Class H, ASTM E108 Class A, ASTM D3161 Class D, and CSA A123.5.

2) FBC Approval #14809.

b. Performance:

1) 25 Year Limited Material Warranty.

2) 60 mph (97 kph) Limited Wind Warranty.

3) 3 year Right Start Warranty.

4) 3M Colorfast Granules.

3. Three-Tab Shingle Alaskan Scotchgard (230) as manufactured by Malarkey Roofing Products.

a. The Alaskan Scotchgard shingles hold a Class ' A' Fire Rating.

b. As manufactured, Dura-Seal Alaskan meets the requirements of:

1) ASTM D3018 Type 1; ASTM D3161 Class F; ASTM D3462; ASTM D7158 Class H; ASTM E108 Class A; UL 2218 Class 4 Impact Resistance; CSA A123.5.

2) ICC Approval - ESR 3150.

3) FBC Approval - #14809

c. Performance:

1) 35 Year Limited Material Warranty.

2) 100 mph (161 kph) Limited Wind Warranty.

3) 120 mph (193 kph) Enhanced Wind Warranty Available.

4) The Alaskan 20 years Scotchgard Algae Resistance Warranty.

5) Your Choice Warranty Program.

6) 10year Right Start Warranty.

C. Solar Reflective Asphalt Shingles:

1. Solar Reflective Shingle, Ecoasis Premium as manufactured by Malarkey Roofing Products.

a. The Malarkey Ecoasis Premium shingles hold a Class ' A' Fire Rating.

b. As manufactured, Ecoasis Premium AB meets:

1) UL 2218 Class 4 Impact Resistance.

2) ASTM D3018 Type I, ASTM D3161 Class F, ASTM D3462, ASTM D7158 Class H, ASTM E108 Class A, and CSA A123.5.

3) Listed with Intertek/WHI and CRRC.

4) ICC Approval - ESR 3150.

5) FBC Approval - #14809.

c. Performance:

1) 50 Year Limited Material Warranty.

2) 110 mph (177 kph) Limited Wind Warranty.

3) 130 mph (209 kph) Enhanced Wind Warranty Available.

4) Ecoasis Premium 20 years Scotchgard Algae Resistance Warranty.

5) Your Choice Warranty Program.

6) 12 year Right Start Warranty.

D. Color: Color shall be selected from the manufacturer's standard colors.

2.3 SBS MODIFIED UNDERLAYMENT

** NOTE TO SPECIFIER ** Delete if not required.

A. Self-Adhering Underlayment:

1. Product: Malarkey 401 Arctic Seal.

2. Arctic Seal 401, as manufactured, meets the requirements of ASTM D1970.

3. Self-adhering sheet shall be a minimum of 60 mils (1.5 mm) thick.

4. Self-adhering sheet shall be 39 inches (1 meter) in width.

** NOTE TO SPECIFIER ** Delete if not required.

B. SBS Modified Fiberglass Underlayment:

1. Product: Malarkey Right Start Underlayment.

2. ASTM D 4601 Type II Approximate Weight 36 pounds per square.

3. Self-adhering sheet shall be 39 inches (1 meter) in width.

** NOTE TO SPECIFIER ** Delete if not required.

C. Synthetic Underlayment:

1. Product: Malarkey SecureStart Synthetic Underlayment 1030.

2. ASTM D 226 Type I & II Approximate Weight 2.7 pounds (1.2 Kg) per square.

3. CSA 123.3 Type 1 & 2.

2.4 VENTED NAILBASE INSULATED PANELS

A. Approved Manufacturers:

1. Product: Hunter Panel - Hunter Cool Vent.

2. Product: RMAX Insulation - RMAX Multi-Vent.

B. Insulation Value:

1. Vented Nailbase Panel Thickness: ______.

2. Vented Nailbase Panel R-Value: ______.

3. Flat Stock Insulation Thickness: ______.

4. Flat Stock Insulation R-Value: ______.

C. Physical properties (Foam Core):

1. Compressive Strength: ASTM D 1621 and ASTM C 1289, Type II, 20 psi (138 kPa) minimum Grade 2.

2. Dimensional Stability: ASTM D 2126, 2 percent linear change (7 days).

3. Moisture Vapor Transmission: ASTM E 96, < 1 perm (57.5ng/(Pasm2)).

4. Water Absorption: ASTM C 209, < 1 percent by volume.

5. Flame Spread (foam core): ASTM E 84, < 450.

6. Service Temperature: -100 degrees to 250 degrees F (-73 degrees C to 122 degrees C).

D. Panel Construction and Fasteners:

1. Top layer of APA CDX Plywood,

a. Thickness: ______.

2. Middle layer of vented air space with wood spacers and a bottom layer of black fiber reinforced faced polyisocyanurate foam insulation.

a. Vented Air Space and Spacer Thickness: ______.

3. Fasteners shall have a 3/16 inch (5 mm) shank, and corrosion resistant type with oversized heads. Length of fasteners shall be as recommended by the panel manufacturer. Fasteners shall be equal to the panel depth plus a minimum of 1 inch (25.4 mm) penetration into the structural substrate.

2.5 RELATED PRODUCTS

** NOTE TO SPECIFIER ** Delete if not required.

A. SBS Modified 8" High Profile Hip and Ridge Malarkey # 222.

B. SBS Modified Scotchgard 10" High Profile Hip and Ridge Malarkey # 224.

C. SBS Modified Scotchgard Hip and Ridge Strips Malarkey # 225.

D. SBS Modified Scotchgard 12" Hip and Ridge Strips Malarkey # 227.

E. Full Width Perforated Starter Shingle Malarkey Smart Start # 220.