Near 3Rd Cross, Shanideva Temple Street

Chandrappa M R

ADDRESS OF CORRESPONDANCE:

No 4, Rathnamma Nilaya, 1st floor,

Near 3rd cross, shanideva temple street,

2nd block, peenya 1st stage.

Bangalore 560058

Contact no. : Mobile: +91-9035950524

E-mail:

OBJECTIVE

A Proactive decision maker, seeking career enhancements with challenging leadership assignments as Senior Quality Technician, handling quality team with reputed organization that gives me scope to develop and update my knowledge and skills and be part of a team that dynamically, works towards the growth of the organization and gain satisfaction thereof.

OVERALL PROFESSIONAL WORK EXPERIENCE - 9 YEARS

CORPORATE SECTOR. 4 years (since January 2006 to January 2010)

 Had worked with Elcoteq Electronics India Pvt.Ltd- a European Electronic Manufacturing company at Bangalore as quality technician and internal role as assistant training coordinator.(

CORPORATE SECTOR. 2. 2 years (January 2010 till February)

 Worked in ICT service management solutions India Pvt Ltd( Part of wistron corporation) as a quality technician and internal trainer (

PRIVATE SECTOR 3. Years (June 2002 to- July 2005)

Worked in private company Online off line UPS Manufacturing company switching power conversion

Pvt ltd as assembly and testing and soldering operator for 3 years

Elcoteq Electronics India Pvt.Ltd, BangaloreJan 06– Jan 2010

A reputed Europe EMS Manufacturing company at Bangalore.(

Key Responsibilities:

 To follow up and coordinate product quality issues which are detected during inspection in line

 To embark process improvement projects with test engineering, process engineering and production for process and customer top process defects.

 Perform periodic process audit,To verify defective incoming materials and evaluate incoming material with test and manufacturing engineering for Quality Notice (QN) final disposition.

 To follow up for closure of Corrective Action and NCAR reports

 To implement quality tools in production, thereby to ensure quality control and continuous improvement

 Man power Planning , Machine utility , Vendor development , supplier audit & process audit, SCAR ( Supplier corrective action report ) & 8D verification, Responsible for quality related issue, house keeping & discipline in shop floor

 Initiate work standards, Process specification & the measuring standards for the new products. Initiate necessary steps to rectify & eliminate / Minimize the in process defects. Handling of Documents & Records, Provide PFMEA (Product failure mode and effect analysis) for the new products

 Preparing of quality inspection plan (new developed products). Knowledge of ESD and MSD.

 Identified as 5 S champions for Engineering department (The 5-S practice is a technique used to establish and maintain quality environment in an organization through good product quality, improving efficiency, productivity, maintaining safety and cleanliness, and by maintaining good control over processes. The name stands for five Japanese words: Seiri (Sorting/ Clearing), Seiton (Arranging), Seiso (Sweeping/Cleaning), Seiketsu (Sanitation/Cleanliness) Shitsuke (Self Discipline)..

 Key responsible areas: Process Audit in the product line., Follow up of corrective actions reports, Maintain the documents like CAR, Process Audit report, Check sheets etc both soft and hard copy for record. ESD Audit in the shop floor, Certification of Operators, Training of Operators and technicians, Computer literacy, Qualified internal auditor and also should have knowledge on the internal auditing process, Knowledge on continuous improvement concepts, Good team player and result oriented Thorough monitoring with continuous rounds and audits to ensure that the process going smoothly.

 Initiates improvement projects for cost saving in various product related activities like Kaizen, Poka Yoke, CIP, Make daily works simply and effective, Good communication with each functional departments

 Memberships & Affiliations: Active member of: Emergency Response Team (ERT) Environment Health and Safety (EHS) team, SA & OHSAS audit team, internal trainer.

ICT Service management solutions India JAN 2010 – Till

A Taiwan based ODM Manufacturing company (

Key Responsibilities:

 Perform periodic process audit,To verify defective incoming materials and evaluate incoming material with test and manufacturing engineering for Quality Notice (QN) final disposition.

 To follow up for closure of Corrective Action and NCAR reports

 Prepare and edit the SOP (Standard operating procedure) according by changing of model version and if any defects found by during work if process needs to be change the SOP change will be done in lotus notes.

 Responsible to handle a team of 10 IQC /OQC and IPQC employees to ensure that there shall be no non compliance in the plant process activities

 Taking care of calibration of equipments like DMM(digital multimeter, CRO,soldering stations, Hot air blower, ionizers, electrical screw drivers,

 Provide induction Training to the new operators Stage wise, Carry out the skill tests for the operators.

 Provide inputs for the PPAP (Production part approval process) and PFMEA (Product failure mode and effect analysis) for the new products.

Swithing power conversion Pvt ltd June 2002– July 2005

A Indian offline and online UPS manufacturing Company.

 Worked as operator for offline wiring assembly stage.

 Handle the wave soldering machine and soldering and rework of PCB

 Ensure to get the production in working hours

 Manage the line operators with shop floor control system , achieve the product as per demand

 Worked in PCB assembly line as stuffing operator, wave machine operator, rework and box build stage

CORE COMPETANCIES

Good written and verbal communication skills.
Vendor management skills
Good man management skills
Attentive listener and work well with others.
Responsible, focused and ambitious.
Proven ability to analyze, plan, manage and motivate the team.
Careful attention to documentation and record keeping
Courtesy, tact, and ability to establish and maintain effective working relations with officials, staff members and others of different cultural backgrounds.
Ability to functions in a team and open mind towards multi disciplinary collaborations.

Trainings Attended:

 OHAS training undergone and certified from usha armour PVT ltd.

 FIRST AID Training undergone and certified from St John Hospital (certified by red cross)

 Kaizen, poka yoke, lean manufacturing, Six sigma, 8D,FMEA, and TQM,7QC tools training attended at Elcoteq India.

 Best trainer award in the year of 2008 and 2009 certified from Elcoteq

COMPUTER CREDENTIALS: Proficient with the use of MS Office, MS Word & the Internet

Present CTC: 2 Lac per annum

Expect CTC : 2.5 lac to 3 Lac

Notice period: 1 Month

EDUCATION CREDENTIAL

Year / Courses / Board / University / Name / Aggregate
1998-2000 / SSLC / Central Board of Secondary Education / Malenadu High school mallipattana / 55.86%
2002-03 / ITI Electronics / NCVT Delhi / Govt ITI Arkalgud / 69.86
2010-2012 / Diploma in Electronics& telecommunication / EIILM University / EIILM University / Pursuing

Personal Details:

Father’s name : Rajappa

Date of birth : 01.06.1985

Sex : Male

Nationality : Indian

Permanent address :

Chandrappa S/O Rajappa

Magalu (V)

Aladahalli Post, mallipattana Hobli,

Arkalgud Tq

Hassan district

Karnataka.

India, PIN Code-573102

Contact number : 9035950524 /9035379569(Mobile)

Email id:

Marital status : Married

Languages known : Kannada, English, Hindi, Tamil

I here declare that the above information are true and correct to the best of my knowledge and belief. By considering the above, I humbly request you to provide me an opportunity to work in your organization

DATE:

PLACE: Bangalore (Chandrappa M R)