QUICK STARTOF PRODUCT 1

  1. Multifunction button (long press to enter pairing mode)
  2. Volume Down
  3. Volume Up
  4. Audio Input
  5. USB charging jack
  6. On/ off switch

For Maxell 2 year warranty information please see

2GET STARTED

  1. Switch ON the speaker by sliding the power button to ON position
  2. Press and hold the Multifunctional button for about 8 seconds to pair, the LED indicator will flash red and blue. The Bluetooth enabled device can scan and connect to “MXSP-BT03”
  3. Music playing or phone calling is now available with your MXSP-BT03.

OR to connect using the 3.5mm to 3.5mm cable included:

  1. Plug the 3.5mm audio cable from your device to the speaker’s AUDIO INPUT
  2. Music playing is now available with your MXSP-BT03

SPEAKER OPERATION & SPECIFICATION3

There isseveral functions for the speaker such as answer call, end call, redial, Microphone mute etc. Also some more details for the specification of speaker. For more details operation and information of the speaker, please go to [ and you can download the full user manual and specification to check for it.

Note:The specification may be change at any time without advance notice.Maxell reserve the rights for any modification of this product.

4CAUTION & CARE

  • Do not burn or bury batteries.
  • Do not puncture or crush.
  • Do not disassemble.
  • Li-Polymer batteries must be recycled. Do not dispose of in the trash.
  • Use only chargers rated for Li-Polymerbattery. Be sure the charger’s voltage and current settings are correct for the battery pack being charged.
  • Charge batteries on a fireproof surface and away from flammable items or liquids.

CAUTION & CARE5

  • Batteries should NEVER be left unattended while charging. Only adults should charge the batteries or give well instruction to children for charging.
  • Follow the manufacturer’s instructions for charging the product and do not charge longer than recommended. Unplug the charger when the battery is fully charged or not in use.
  • The speaker is not magnetically shielded and may cause color distortion on the screen of some TVs or video monitors. To avoid this, you may need to move the unit further away from the TV or monitor if an unnatural color shifts or image distortion occurs.
  • Avoid operating your unit under direct sunlight or in hot, humid or dusty places.

6CAUTION & CARE

  • Keep your unit away from heating appliances and sources of electrical noise such as lamps or motors.
  • Don’t try to disassemble the product.
  • Don’t let it fall down onto the floor or other hard surfaces. The internal circuit might get damaged.
  • Don’t scratch the surface with sharp things.
  • To prevent fire or shock hazard, disconnect your unit from the USB port of power source when cleaning.
  • The finish on the unit may be cleaned with a dust cloth and cared for as other furniture, be caution when cleaning and wiping the plastic parts.
  • If you feel any abnormal of the product, STOP to use the product immediately.