MSc in Engineering Management
Course: Product Design and Development – MME511
Academic Year: 2010 – 11 (Spring Semester)
Lecturer: Dr. Antonios Lontos
Assignment 1:
«Write the title of your assignment»Prepared by:
George Georgiou
BSc in Mechanical Engineering
March 2011 - Cyprus
TABLE OF CONTENTS
Page
1.INTRODUCTION ……………………………………………………..……
2.LITERATURE REVIEW……………………………….…………....….….
3.THEORETICAL ASPECT OF THE DEVICE …………………………..
3.1Main idea …………………………………………....………….…
3.2Use of device …………………………………….…………….…
3.3Calculations …………………………………………....….…...…
3.4Restrictions regarding the use of the device …………….……
3.5Safety ………………………………………………………………
4.CONSTRUCTION OF THE DEVICE ………………………………...…
4.1Selection of Materials ………………………………………...…4.2Construction of part A …….………………….……………….…
4.3Final construction and assembly …………………………….…
4.4Cost of the device …………………………………………..……
4.4.1Cost of each part ……………………………….………
4.4.2Cost of manufacturing ……………………………….…
4.4.3Overall cost …………………..………………….….…..
5.CONCLUSIONS ……………………………….……………..……..……
6.REFERENCES ………………………………………..……….…………
APPENDICES
Appendix A: Technical specifications
Appendix B: A……….
Appendix C: A……….
Appendix D: A………. /1
23
4
5
6
1
1. Introduction
1.INTRODUCTION
This project contains the instructions and information necessary to use the impact tester safely and efficiently. Users, installers, repairmen and anyone else, for any reason, who works with this instrument, must comply with these instructions.
-1-
2. Literature Review
2.LITERATURE REVIEW
To show your advisor that you know what your talking about concerning your project, you need to demonstrate that you know the background and context of your topic. Good questions to answer in this section are:
-What kinds of research have been done before
-Where is the state of the art today?
-How have others gone about trying to solve problems you want to tackle, and in what ways will your approach build on and vary from previous work?
Think of the background section as the place where you identify and discuss the most important books, articles, or any other kind of source materials for your project. Everything in your literature review section should be mentioned in your bibliography.
-1-
3. Theoretical Aspect of the Device
3.THEORETICAL ASPECT OF ….
3.1Main Idea
Fig. 1 shows the basic applications of the Tester on thin and thick coatings.
Fig. 1: How to put pictures
The impact module performs the successive impacts at a predefined steady load level on the coated specimen. The impact tester consists of the core and the coil in order to achieve the impact loads based on the Laplace magnetic forces produced by an electromagnetic field.
Fig. 2:Diagrams of the ….
Tables should be numbered consecutively with numerals in the order of appearance in the text. Each table should include a short descriptive title typed directly above and with essential footnotes below (Table 1).
Index / Average valueMeasurement 1 / Measurement 2 / Measurement 3
1 / 88 / 410 / 48
2 / 85 / 420 / 48
3 / 86 / 423 / 45
Table 1: An example of a table (Arial, Size 12)
Equations should be cited as Eq. [1]. Equations numbers should be typed on the right-hand margin opposite the equation (Eq. [1]).
[1]
-1-
5. Conclusion
5.CONCLUSIONS
A summary of the main conclusions should be included.
-1-
References
6.REFERENCES
[1]Erkens, G., Interpretation of coatings performance in impact testing based on thin hard coatings stress-strain curves, accepted for oral presentation in ICMCTF 2001, April 30 - May 4 2001 in San Diego, California.
[2]T. Leyentecker, G. Erkens, PVD coatings fatigue performance examined through the impact test, with regard to specimens’ roughness specifications, accepted for oral presentation in ICMCTF 2001, April 30 - May 4 2001 in San Diego, California.
[3]O. Lemmer, H.-G. Fuss, G. Erkens, Determination of the fatigue behaviour of thin hard coatings using the impact test and a FEM simulation, Surface and Coatings Technology, vol. 86/87, (1996), pp: 549-556.
-1-
Appendices
APPENDICES
APPENDIX A: Technical specifications
APPENDIX B: Aaaaa
-1-
Appendices
Appendix A: Technical specifications-1-