Module 1-Basic principles and field of view
Please watch the video segments and read the material in the folder 2364-2368 prior to beginning the lab. and set up the first box as shown in the pictures in the file folder names “module 1”. All boxes, clamps, and squares can be found in the cabinets on the west wall of the lab. Use the two squares and C clamps to create a stable hold on the box. You may need to remove the drawer periodically to appropriately secure the clamp for some of the boxes. Make sure to boot up the image capture system on the left hand side of the bench. At the appropriate prompt enter your name in the patient category and a number for the MRN. You will need a USB to plug into the front of the system. There is an orange stylus that can be used to press the capture button which will take pictures for you. Unfortunately we do not currently have a camera with an image capture button, so taking pictures can be awkward at times as you will need to balance the camera or probe to have a free hand to press the button. After taking all pictures for one module click the save button to store the images on your USB, you can then send them to Desilva upon completion of all modules. As multiple people will be using the lab, you may have to re-input yourself and re save images for each module.
#1 Use Box #1 with the top open. Perform the remaining steps and note position of scope in relation to objects. Also note the correlation of field of view with the position of the scope angle. Insert 30 degrees scope with dominant hands and identify center image. Obtain a centered picture of image with viewing angle down (triangle at 6:00 position on screen)
#2 keeping center image in field of view and horizon parallel, rotate the angle of the scope identifying top left and top right corners, bottom left and bottom right corners
#3 return to center, look down (6:00) and retract scope slightly while raising hand to identify letter I.
#4. Move hand to the right and look left (9:00 position of triangle) and obtain a centered image of letter Z.
#5 look right (3:00) and move hand to the left to obtain centered picture of letter A. return to center gorilla position with the arrow at 6 o'clock
#6 position the scope to the 8 o'clock position and retract the scope slowly while raising the hand and moving it slightly to the right. this should allow you to follow the inferior left border until you obtain a centered image of the inferior left corner nearest you.
#7 look to the upper left, rotate the scope to the 11 o'clock position and drop your hand so as to get a view of the superior left corner.
#8 return the scope to the 8 o'clock position from Step 6 showing the inferior left corner. slowly retract and raise your hand, sweeping from a right-handed position to a left-handed position and rotating the scope to 6 o'clock and then 5 o'clock. this should allow you to follow the inferior border nearest you until you arrive at the inferior right corner of the box.
#9 repeat the steps now with the lid on. after completing step 8 return to the center gorilla position and look up with the scope ( 12 o'clock position). retract slowly and note the color of the lid. you have now completed the grand tour of the box. for the remaining modules you should also view all aspects, edges, and corners of the box in the same or similar systematic way prior to beginning the remainder of the exercises.
# 10 now repeat with non-dominant hand.
#11 remove the 30 degree scope and insert the 70 degree scope into the box with the lid off. point the scope straight ahead at the gorilla as you did with the 30 degree scope. while maintaining this position rotate the scope 360 degrees. note that as you look at the monitor you are unable to obtain a full picture of the gorilla face at any one time. This is the central blind spot associated with the 70 degree scope.
#12 take another tour of the box with the 70 degree scope, noting the position differences in the box between it and the 30 degree scope.
Box # 2:
1) insert 30 degree scope into center hole of box and perform systematic grand tour of box.
2) open box lid to correlate position in space relative to what you see in the field.
3) Insert scope into right and left portals and appreciate other viewpoints.
4) position field of view with arrow at 6 o’clock from center portal only, capture image of ford Fairlane, capture centered image of orange smiley face, blue star, capture image that answers the question “are riders allowed on the red truck?”, image of clear triangle, and red orb.
5) Change field of view to best capture image of inside of Ford Fairlane, red lego disc, metallic ring
6) Using any portal or field of view, take centered pictures of 3 black screws, 3 smiley faces,
7) Determine how many stars there are and take pictures of each
8) What does the decal on the Mustang say?
9) Take a picture of the roof inside the yellow Mustang as well as where it was made and the serial number
10) What is the model number on the truck?
11) Find the surgeon general’s warning and take a picture
12) How many animals are in the box? Take a picture of each.
13) There are lettered objects in the box, what do the letters spell? (answer: SLICK)
14) what number is listed on the ceiling of the box? Take a picture
15) Take a picture of the serial number on the truck.
16) Should you buy or sell the truck?
17) Take a picture of all 7 lego pieces. Change field of view and/or portals as needed.
18) Change to the 70 degree scope and insert into the center portal. With the lid of the box open, explore various items. Take note of your position in space relative to image from the scope.
19) Take a picture of the steering wheel of the Fairlane from the perspective of the back seat.
20) Take a centered picture of the passenger side, rear tire of the Mustang.
21) Switch to the right portal and take a perfectly centered picture of the word “EVOLVE”
22) Answer the question: what year is the Ford Fairlane?
23) From the left portal, answer the question, “should you buy or sell the Fairlane?”
24) From the left portal take a well-centered picture of the “Ford motors sign”
25) From the center portal, find what letter is etched in the red ball.
Box # 3
1) Insert 30 degree scope into center portal and perform systematic grand tour starting centered on “secret” (refer back for description of “grand tour” protocol).
2) Take centered picture of the clear leaf and screw.
3) Count stars-2
4) Find the flying Buddha from center portal; take picture. Then switch to left portal and find flying Buddha again (take another centered picture). Repeat the same steps with the “trade” sticker.
5) Count and take a picture of each animal in the box.
6) Take picture of Zia records sticker
7) Count how many letters there are (take picture of each)
8) what does the passenger’s side front of the car say? Take a picture.
9) Take a well-centered, up-right picture of the red smiley face.
10) switch to 70 degree scope in the left portal, take a well-centered, upright picture of the letter “d” with scope at 9 o’clock, then rotate to 12 o’clock to obtain a picture of the “WARC” sticker.
11) take a picture of the back-side of the car