Model removable sleeves.In the sleeves top hat elastic inserts to better hold on.Knit scarf wider, or any tie the border, since this width can clearly not be enough.Connect the rear muffler and air loops back, or art.with trebles, clinging to the edge of their border.
Size: 38/40 You will need: 350 g of yarn color of old silver Chlara (70% viscose, 20% of the Royal mohair, 10% polyamide 190m/25 g) hooks № 3.5 and 4m
The basic pattern: number of loops composing multiple of 6 + 1 + 1 ch.§ recovery.Knit of Scheme 1.Each row start with 1 ch.lifting or claim 3 further temperature.§ Lifting instead of 1 tbsp.s / n.To begin with loops before rapport, rapport repeat loop, repeat after finishing loops.Run one time from the 1st to the 9th district., Then repeat with the 2nd to the 9th district. Pattern "shell": knit as the main pattern, but in Scheme 2.Run one time from the 1st to 8th c ..then repeat with the 3rd to the 6th district. The density of knitting basic pattern: the initial section 33.5 and 19 p.= 10 x 10 cm: * pattern-shells: the initial section 32.5 and 14 p.= 10 x 10 cm TOP Attention!Top consists of 3 parts. Shoulder part: on the spokes № 3.5 with 91 temperature.n + 1 ch.Section lift and knit the basic pattern.After 142 cm left to the left edge of the bevel with 1 cm on each track.* row alternately 1 x 1.5 and 1 x 1 cm neprovyazannymi, repeat from * 9 times, and then leave for another 1 x 1 cm neprovyazannym; through 154 cm from the edge of typesetting finish the job. Before: on the spokes № 3,5 temperature dial 139.n + 4 temperature.n Lift and knit pattern "shells."After 35 cm from the edge of typesetting for slots to perform the first 32 cm, 4 cm left neprovyazannymi and knit the first 7 cm in the next row to connect an additional set of 23 temperature.n and knit on all hinges on the pattern.After 43 cm from the edge of typesetting job to finish. BACK: on the spokes № 3,5 temperature dial 139.n +4 temperature.n Lift and knit pattern "shells."To shape neprovyazannymi leave both sides in every 2 p 8 x 0.5 cm At 13 cm from the edge of typesetting job to finish. Assembly: do seams.combining these icons in the pattern.Sew the sides of the back towards the front, the narrow sides of the shoulder to the right side seam on top of the back, constantly paying attention to the icons.Thread the left shoulder-piece with a scarf through the slot in front. SLEEVES Job Description: on the spokes № 3,5 score 66 temperature.n and enclosed in a circle with 1 sl.Art.Next, the basic knit circle pattern.p., with each circle, starting with p 1 starting or replacing the 1st paragraph temperature.sts, repeat rapport, finish with 1 sl.Art.the 1st paragraph circle.p.or the initial temperature in the last paragraph in 20 cm from the edge of typesetting continue working on the spokes number 4.At 40 cm from the edge of typesetting finish work