Mobile Surveillance (Blackberry) User Instruction

手机监控（黑莓）直连版使用说明

Mobile surveillance (Blackberry) user instruction

Catalogue

1.Introduction

1.1.Writing Purpose

1.2.Software instruction

1.3.Software user environment

2.Software user

2.1.Software installation and uninstallation

2.1.1.Installation

2.1.2.Uninstallation

3.DVR setting

3.1.Code setting

3.2.User setting

4.Software operation

4.1.Network setting

4.2.Login

4.3.Open Video

4.4.Video surveillance

4.5.Setting

4.6.Program exit

Instruction

1.1.Writing purpose

Instruction how to install, monitor the use of mobile phones (BlackBerry)

1.2.Software instruction

Key function and features:

View real-time video function.

Provide PTZ function for the video channel with PTZ function.

Software user environment.

This version for the operating system of 4.6 series blackberry mobile.

Equipment procedures required to support RTSP function.

2.Software user

2.1.Software installation and uninstallation

2.1.1.Installation

Use synchronization software which provided by vendors to install. The specific installation steps refer to the phone manual.

2.1.2.Uninstallation

Uninstallation interface

Option: mobilefunction listingVS500manualDelete.

3.DVR setting.

Before using surveillance software, it must pre-set the surveillance equipment, to accommodate phone monitor （Low performance mobile, poor network status）Mainly setting two aspect Video encoding and user management. It can accomplish through set log device or DVR local setting, WEB client as example to instruction.

Encoding setting:

3.1.Encoding setting

Encoding setting screen

1. Check the extension stream (if the phone interface, select the monitor to extend the use stream)

Set encoding parameter, required as follow:

Resolution：CIF or QCIF（do not support D1 resolution）；

Frame rate：CIF：5-8f；QCIF：8-16f；

Stream type：Limited

Stream：64-256Kb/S

Note：It can adjust mobile performance and network status. Good mobile performance and network status will be better. If the network is in poor condition and frame rate can be reduced to ensure the smooth

3.2.User Setting

User setting screen

Set login name is “reuse”
Open PTZ function.

6.Instruction

6.1.Internet setting

Mobile network setting screen

Option：Ceil phoneFunction list Connection Management，to choose different network. And when connecting internet,user will make corresponding setting according to different mobilephone networkoperator,you can contact the mobilephone network operators get more information.Taking CHINA MOBILE network setting as sample,setting method as follow:

Choosing：Function list OptionsAdvanced optionsTCP：

APN：cmnet；

APN username:

APN password:

CHINA MOBILE network setting

6.2.LOGIN

Programmer start interface

Option：Ceilphone Function list DownloadVS500 to run programmer to open user Loginpage.

Input device IP, port,user name, password in login page and then press” login”.After login success, programmer will open video select page。Mobile can record the recently visited device IP and other information for next login.

Remark：There are two options in “Network”:WIFI and Other. “WIFI” means you choosing WIFI to connect internet；“Other” means choosing other network

Solution to the potential problem:

Input information right or not

Network connection working properly or not

Device worked well or not

6.3.OPEN VIDEO

Channel choosing interface

Key definition:

Return：Return to surveillance interface,open the visited channel last time as default

Exit:Exit Programmer

Open video method

After choosing channel,clink and open it.

6.4.Video surveillance

Video surveillance interface

Key definition:

Video：Switch to channel choosing page

Full：Press it to switch to full screen viewing

Set：Press to popup channel preparer setting interface

EXIT：Exit programmer

PTZ control：

Press “” to control PTZ to move up/down, left/right.Pressleft/right button to executive command；

Press “” to adjust zoom/aperture/focus，press plus/minus button to executive command.

Full screen viewing:

Press “Full” button to enter full screen viewing state.User can use trackball to control PTZ.Press function key to return surveillance interface.

6.5.SETTING

RTSP port：Set same port as on device,default setting is 554

Code stream type：Set ceilphone viewing requested streaming type

Setting interface

6.6.PROGRAM EXIT

Press “Exit”to exit program.