Measurement Uncertainty Bibliography
Altman, D.G., Machin, D., Bryant, T.N., and Gardner, M.J., Statistics with confidence,
2nd ed., London: British Medical Journal, 2000.
Alvarez-Prieto, M., Jimenez-Chacon, J. and Montero-Curbelo, A., “Do we need to consider
metrological meanings of different measurement uncertainty estimations?”,
Accred Qual Assur, Vol.14, 2009, pp. 623-634.
Analytical Methods Committee, “Uncertainty of measurement: implications of its use in
analytical science”, Analyst, Vol.120, 1995, pp. 2303-2308.
Anderson, H., “The use of uncertainty estimates of test results in comparisons with
acceptance limits”, Accred Qual Assur, Vol.7, 2002, pp. 228-233.
Altman, D.G., Machin, D., Bryant, T.N. and Gardner, M.J., Statistics With Confidence:
Confidence Intervals and Statistical Guidelines, Second Edition, London: British
Medical Journal, 2000.
Armishaw, P., “Estimating measurement uncertainty in an afternoon. A case study in the
practical application of measurement uncertainty”, Accred Qual Assur, 2003, Vol.8,
pp. 218-224.
Badrick, T., Hawkins, R.C., Wilson, S.R. and Hickman, P.E., “Uncertainty of measurement:
What it is and what it should be”, Clin Biochem Rev, Vol.26, 2005, pp. 155-158.
Bartley, D.L., “The meaning of the bias uncertainty measure”, Ann Occup Hyg, Vol.52,
2008, pp. 519-525.
Bartley, D. and Liden, G., “Measurement uncertainty”, Ann. Occup. Hyg, Vol.52, 2008,
pp. 413-417.
Barwick, V.J. and Ellison, S.L.R., “Measurement uncertainty: approaches to the evaluation
of uncertainties associated with recovery”, Analyst, Vol. 124, 1999, pp. 981-990.
Bevington, P.R. and Robinson, D.K., Data reduction and error analysis for the physical
sciences, 3rd Ed., Boston: McGraw-Hill, 2003, pp. 1-12, 36-49.
Bich, W., Cox, M.G. and Harris, P.M., “Evolution of the ‘Guide to the Expression of
Uncertainty in Measurement’”, Metrologia, Vol.43, 2006, pp. S161-S166.
Bich, W., “Interdependence between measurement uncertainty and metrological
traceability”, Accred Qual Assur, 2009.
BIPM, IEC, IFCC, ISO, IUPAC, IUPAP and OIML,“Guide to the Expression of Uncertainty in
Measurement”, 2008, Geneva,
BIPM, IEC, IFCC, ISO, IUPAC, IUPAP and OIML,“Evaluation of measurement data -
Supplement 1 to the ‘Guide to the Expression of Uncertainty in Measurement”,- Propagation
of distributions using a Monte Carlo method, Geneva,
Brix, R., Hansen, S.H., Barwick, V. and Tjornelund, J., “Method optimization with the use of
uncertainty budgets”, Analyst, Vol.127, 2002, pp. 140-143.
Buffler, A., Allie, S. and Lubben, F., “Teaching measurement and uncertainty the GUM
way”, The Physics Teacher, Vol.46, 2008, pp. 539-543.
Cowan, S. and Ellison, S.L.R., “Reporting measurement uncertainty and coverage intervals
near natural limits”, Analyst, Vol. 131, 2006, pp. 710-717.
Cox, M.G. and Siebert, B.R.L., “The use of a Monte Carlo method for evaluating uncertainty
and expanded uncertainty”, Metrologia, Vol.43, 2006, pp. S178-S188.
Czaske, M., “Usage of the uncertainty of measurement by accredited calibration
laboratories when stating compliance”, Accred Qual Assur, Vol.13, 2008, pp. 645-651.
da Silva, R.J.N.B., Santos, J.R. and Camoes, M.F.G.F.C., “A new terminology for the
approaches to the quantification of the measurement uncertainty”, Accred Qual Assur,
Vol.10, 2006, pp. 664-671.
de Bievre, P. and Gunzler, H., editors, Measurement Uncertainty in Chemical Analysis,
New York: Springer-Verlag, 2003.
Deldossi, L. and Zappa, D., “ISO 5725 and GUM: comparison and comments”,
Accred Qual Assur, Vol.14, 2009, pp. 159-166.
Desenfant, M. and Priel, M., “Road map for measurement uncertainty evaluation”,
Measurement, Vol.39, 2006, pp. 841-848.
Desimoni, E. and Bruneetti, B., “Uncertainty of measurement and conformity assessment: a
review”, Anal Bioanal Chem, on line, February 2011.
de Souza, V., Rodrigues, J.M., da C. Cunha Bandeira, R.D., das Neves Valente, L.A.,
Sousa, M.V.B., da Silva, V.F., da Silva, R.A.L., “Evaluation of the stability of ethanol in
water certified reference material: measurement uncertainty under transport and storage
conditions”, Accred Qual Assur, Vol.13, 2008, pp. 717-721.
Donaldson, J.R., “On uncertainty in mass measurement”, National Bureau of Standards
Bulletin, NBSIR 73-151, 1973.
Dybkaer, R., “Result, error and uncertainty”, Scand J Clin Lab Invest, Vol.55, 1995,
pp. 97-118.
Dybkaer, R., “From total allowable error via metrological traceability to uncertainty of
measurement of the unbiased result”, Accred Qual Assur, Vol.4, 1999, pp. 401-405.
Eisenhart, C., “Expression of the uncertainties of final results”, in Precision Measurement
and Calibration: Selected Papers on Statistical Concepts and Procedures, Ku, H.H., editor,
National Bureau of Standards Publication 300 Vol.1, Feb. 1969.
Eleftheriou, P. and Papastefanou, H., “Measuring performance in analytical
measurements”, Accred Qual Assur, Vol.14, 2009, pp. 67-71.
Elkins, R.P., “The precision profile: its use in assay design, assessment and quality control”,
In: Immunoassays for clinical chemistry, 2nd ed., Hunter, W.M. and Corrie, J.E.T., eds.,
Edinburgh:Churchill Livingstone, 1983, pp. 76-105.
Ellison, S.L.R. and Barwick, V.J., “Estimating measurement uncertainty: reconciliation using
a cause and effect approach”, Accred Qual Assur, Vol.3, 1998, pp. 101-105.
EURACHEM/CITAC, “Quantifying Uncertainty in Analytical Measurement”, 2nd Ed.,
Guide CG 4,
European Federation of National Associations of Measurement, Testing and Analytical
Laboratories (EUROLAB), “Guide to the evaluation of measurement uncertainty for
quantitative test results”, Technical Report No. 1/2006, August 2006, Paris, France.
European Federation of National Associations of Measurement, Testing and Analytical
Laboratories (EUROLAB), “Measurement uncertainty revisited: alternative approaches to
uncertainty evaluation”, Technical Report No. 1/2007, March 2007, Paris, France.
Uncertainty_2007.pdf
Farrance, I and Frenkel, R., “Uncertainty of measurement: a review of the rules for
calculating uncertainty components through functional relationships”, Clin Biochem Rev,
Vol.33, 2012, pp. 49-75.
Fernandez, M.S., Alegre Calderon, J.M. and Bravo Diez, P.M., “Implementation in MATLAB
of the adaptive monte carlo method for the evaluation of measurement uncertainties”,
Accred Qual Assur, Vol.14, 2009, pp. 95-106.
Fisher, L.D. and van Belle, G.,Biostatistics: A Methodologyfor the Health Sciences,
New York: John Wiley and Sons, 1993,p. 305.
Gates, K., Chang, N., Dilek, I., Jian, H., Pogue, S. and Sreenivasan, U., “The uncertainty of
reference standards - a guide to understanding factors impacting uncertainty, uncertainty
calculations, and vendor certifications”, J Anal Tox, Vol.33, 2009, pp. 532-539.
Gonzalez, A.G., Herrador, M.A. and Asuero, A.G., “Estimation of the uncertainty of mass
measurements from in-house calibrated analytical balances”, Accred Qual Assur, Vol.10,
2005, pp. 386-391.
Gore, S.M., “Assessing Methods - Confidence Intervals”,British Medical Journal, Vol 283,
Sept. 5, 1981, pp. 660-662.
Gregory, K., Bibbo, G. and Pattison, J.E., “A standard approach to measurement
uncertainty for scientists and engineers in medicine”, Australasian Physical and Engineering
Sciences in Medicine, VVol.28 No.2, 2005, pp. 131-139.
Gullberg, R.G., “Estimating the Measurement Uncertainty in Forensic Breath Alcohol
Analysis, Accred Qual Assur, Vol.11 No.11, 2006, pp. 562-568.
Gullberg, R.G., Estimating the Uncertainty Associated with Widmark’s Equation as
commonly Applied in Forensic Toxicology, Forensic Science International, Vol. 172, 2007,
pp. 33-39.
Gullberg, R.G., “Estimating the measurement uncertainty in forensic blood alcohol
analysis”, J Anal Toxicology, Vol. 36, 2012, pp. 153-161.
Hayashi, Y. and Matsuda, R., “An expression of uncertainty in calibration using stepwise or
separate dilution of a stock solution”, Analytical Sciences, Vol.22, 2006, pp. 889-894.
Heydorn, K. and Anglov, T., “Calibration uncertainty”, Accred Qual Assur, Vol.7, 2002,
pp. 153-158.
Heydorn, K. and Anglov, T., “Calibration uncertainty”, Accred Qual Assur, Vol.7, 2002,
pp. 153-158.
Hibbert, D.B., Quality Assurance for the Analytical Chemistry Laboratory, London: Oxford
University Press, 2007.
Hibbert, D.B., “The uncertainty of a result from a linear calibration”, Analyst, Vol.131, 2006,
pp. 1273-1278.
Horwitz, W., “The certainty of uncertainty”, Journal of AOAC International, Vol.86 No.1,
2003, pp. 109-111.
Hund, E., Massart, D. and Smeyers-Verbeke, J., “Operational definitions of uncertainty”,
Trends in Analytical Chemistry, Vol.20, 2001, pp. 394-406.
International Organization for Standardization (ISO), International Vocabulary of Metrology -
Basic and General Concepts and Associated Terms(VIM), JCGM 200, 2008.
Jimenez-Chacon, J. and Alvarez-Prieto, M., “Modelling uncertainty in a concentration
range”, Accred Qual Assur, Vol.14, 2009, pp. 15-27.
Juardo, J.M. and Alcazar, A., “A software package comparison for uncertainty
measurement estimation according to GUM”, Accred Qual Assur, Vol. 10, 2005,
pp. 373-381.
Kacker, R., Sommer, K. and Kessel, R., “Evolution of modern approaches to express
uncertainty in measurement”, Metrologia, Vol.44, 2007, pp. 513-529.
Kane, J.S., “Analytical bias: the neglected component of measurement uncertainty”,
Analyst, Vol.122, 1997, pp. 1283-1288.
Kessel, R., Kacker, R. and Berglund, M., “Coefficient of contribution to the combined
standard uncertainty”, Metrologia, Vol.43, 2006, pp. S189-S195.
King, B. and Lawn, R., “International interlaboratory study of forensic ethanol standards”,
Analyst, Vol.124, 1999, pp. 1123-1130.
King, B., “Meeting the measurement uncertainty and traceability requirements of ISO/IEC
standard 17025 in chemical analysis”, Fresenius J Anal Chem, Vol.371, 2001, pp. 714-720.
Kirkup, L. and Frenkel, B., An Introduction to Uncertainty in Measurement, Cambridge:
Cambridge University Press, 2006.
Kristiansen, J., “Description of a generally applicable model for the evaluation of uncertainty
of measurement in clinical chemistry”, Clin Chem Lab Med, Vol.39, 2001, pp. 920-931.
Kristiansen, J. and Petersen, H.W., “An uncertainty budget for the measurement of ethanol
in blood by headspace gas chromatography”, J of Analytical Toxicology, Vol.28, 2004,
pp. 456-463.
Kristiansen, J. and Christensen, J.M., “Traceability and uncertainty in analytical
measurements”, Ann Clin Biochem, Vol.35, 1998, pp. 371-379.
Krouwer, J.S., “Estimating total analytical error and its sources: techniques to improve
method evaluation”, Arch Pathol Lab Med, Vol.116, 1992, pp. 726-731.
Ku, H.H., “Expressions of Imprecision, Systematic Error, and Uncertainty Associated with a
Reported Value”, Measurements & Data, Vol.2 No.4, 1968, pp. 72-77.
Lee, S., Choi, H., Kim, E., Choi, H., Chung, H. and Chung, K.H., “Estimation of the
measurement uncertainty by the bottom-up approach for the determination of
methamphetamine and amphetamine in urine”, J Anal Tox, Vol.34, 2010, pp. 222-228.
Leito, S. and Leito, I., “Introduction of measurement uncertainty estimation into analytical
instrument software: mission impossible?”, Accred Qual Assur, Vol.9, 2004, pp. 666-670.
Linnet, K., Johansen, S.S., Buchard, A., Munkholm, J. and Morling, N., “Dominance of
pre-analytical over analytical variation for measurement of methadone and its main
metabolite in postmortem femoral blood”, Forensic Science International, Vol. 179, 2008,
pp. 78-82.
Love, J.L., “Chemical metrology, chemistry and the uncertainty of chemical measurements”,
Accred Qual Assur, Vol.7, 2002, pp. 95-100.
Lyn, J.A., Ramsey, M.H., Fussell, R.J. and Wood, R., “Measurement uncertainty from
physical sample preparation: estimation including systematic error”, Analyst, Vol.128, 2003,
pp. 1391-1398.
Lyn, J.A., Ramsey, M.H., Damant, A.P. and Wood, R., “Empirical versus modeling
approaches to the estimation of measurement uncertainty caused by primary sampling”,
Analyst, Vol. 132, 2007, pp. 1231-1237.
Lyn, J.A., Ramsey, M.H., Coad, D.S., Damant, A.P., Wood, R. and Boon, K.A., “The
duplicate method of uncertainty estimation: are eight targets enough?”, Analyst, Vol.132,
2007, pp. 1147-1152.
Mandel, J., The statistical analysis of experimental data, New York: Dover Publications,
Inc., 1964.
Maroto, A., Riu, J., Boque, R. and Rius, F.X., “Estimating uncertainties of analytical results
using information from the validation process”, Analytica Chimica Acta, Vol.391, 1999,
pp. 173-185.
Moroni, R., Blomstedt, P., Wilhelm, L., Reinikainen, t., Sippola, E. and Corander, J.,
“Statistical modeling of measurement errors in gas chromatographic analysis of blood
alcohol content”, Forensic Science International, Vol.202, Issue 1-3, 2010, pp. 71-74.
Maroto, A., Boque, R., Riu, J. and Rius, F.X., “Evaluating uncertainty in routine analysis”,
Trends in Analytical Chemistry, Vol.18 Nos. 9,10, 1999, pp. 577-584.
Maroto, A., Riu, J., Boque, R. and Rius, F.X., “Estimating uncertainties of analytical results
using information from the validation process”, Analytica Chimica Acta, Vol.391, 1999,
pp. 173-185.
NIST, “Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement
Results”, Technical Note 1297 1994 Edition,
O’Donnell, G.E. and Hibbert, D.B., “Treatment of bias in estimating measurement
uncertainty”,Analyst, Vol.130, 2005, pp. 721-729.
Ornemark, U. and Holmgren, M., “Measurement uncertainty - surveys about customers
knowledge, reactions and needs”, Accred Qual Assur, Vol. 8, 2003, pp. 354-358.
Panteghini, M., “Application of traceability concepts to analytical quality control may
reconcile total error with uncertainty of measurement”, Clin Chem Lab Med, Vol.48, 2010,
pp. 7-10.
Panteghini, M., “Traceability, reference systems and result comparability”,
Clin Biochem Rev, Vol.28, 2007, pp. 97-104.
Petersen, P.H., Stockl, D., Westgard, J.O., Sandberg, S., Linnet, K. and Thienpont, L.,
“Models for combining random and systematic errors. Assumptions and consequences for
different models”, Clin Chem Lab Med, Vol.39, No.7, 2001, pp. 589-595.
Philipp, R., Hanebeck, O., Hein, S., Bremser, W., Win, T. and Nehls, I., “Ethanol/water
solutions as certified reference materials for breath alcohol analyzer calibration”,
Accred Qual Assur, Vol.15, 2010, pp. 141-146.
Phillips, S.D. and Eberhardt, K.R., “Guidelines for expressing the uncertainty of
measurement results containing uncorrected bias”, J of Res of the NIST, Vol.102 No.5,
1997, pp. 577-585.
Populaire, S. and Gimenez, E.C., “A simplified approach to the estimation of analytical
measurement uncertainty”, Accred Qual Assur, Vol.10, 2006, pp. 485-493.
Rabinovich, S.G., Measurement Errors and Uncertainties: Theory and Practice, 2nd Ed.,
New York: Springer-Verlag, 2000.
Ramsey, M.H., “Measurement uncertainty arising from sampling: implications for the
objectives of geoanalysis”, Analyst, Vol.122, 1997, pp. 1255-1260.
Rocke, D.M. and Lorenzato, S., “A two-component model for measurement error in
analytical chemistry”, Technometrics, Vol.37 No.2, 1995, pp. 176-184.
Rosslein, M., “Evaluation of uncertainty utilizing the component by component approach”,
Accred Qual Assur, Vol.5, 2000, pp. 88-94.
Rosslein, M., Rezzonico, S., Hedinger, R. and Wolf, M., “Repeatability: some aspects
concerning the evaluation of the measurement uncertainty”, Accred Qual Assur, Vol.12,
2007, pp. 425-434.
Salahinejad, M. and Aflaki, F., “Uncertainty measurement of weighing results from an
electronic analytical balance”, Measurement Science Review, Vol.7, 2007, pp. 67-75.
Sklerov, J.H. and Couper, F.J., “Calculation and verification of blood ethanol measurement
uncertainty for headspace gas chromatography”, J Anal Toxicology, Vol. 35, 2011,
pp. 402-410.
Sokal, R.R. and Rohlf, F.J., Biometry, 2nd ed., New York:W.H. Freeman and Co., 1981,
pp. 147-152.
Sommer, K.D. and Siebert, B.R.L., “Systematic approach to the modeling of measurements
for uncertainty evaluation”, Metrologia, Vol.43, 2006, pp. S200-S210.
Taylor, J.R., An introduction to error analysis: the study of uncertainties in physical
measurements, Mill Valley, CA: University Science Books, 1982.
Thompson, M. and Coles, B.J., “Use of the ‘characteristic function’ for modeling
repeatability precision”, Accred Qual Assur, Vol.16, 2011, pp. 13-19.
Thompson, M., “Uncertainty in an uncertain world”, Analyst, Vol.120, 1995, pp. 117N-118N.
Thompson, M., “Sampling: the uncertainty that dares not speak its name”, J Environ Monit,
Vol.1, 1999, pp. 19N-21N.
Thompson, M., “Comparability and traceability in analytical measurements and reference
materials”, Analyst, Vol.122, 1997, pp. 1201-1205.
Thompson, M. and Fearn, T., “What exactly is fitness for purpose in analytical
measurement”, Analyst, Vol.121, 1996, pp. 275-278.
Thompson, M. and Wood, R., “Using uncertainty functions to predict and specify the
performance of analytical methods”, Accred Qual Assur, Vol.10, 2006, pp. 471-478.
Thompson, M., “Do we really need detection limits”, Analyst, Vol.123, 1998, pp. 405-407.
Vardeman, S.B., Wendelberger, J.R., Burr, T., Hamada, M.S., Moore, L.M., Jobe, J.M.,
Morris, M.D. and Wu, H., “Elementary statistical methods and measurement error”, The
American Statistician, Vol.64 No.1, 2010, pp. 46-51.
Wallace, J., “Proficiency testing as a basis for estimating uncertainty of measurement:
application to forensic alcohol and toxicology quantitations”, J Forensic Sci, Vol. 55, 2010,
pp. 767-773.
Wallace, J., “Ten methods for calculating the uncertainty of measurement”, Science and
Justice, Vol.50 No.4, 2010, pp. 182-186.
Wallace, J., “Uncertainty of measurement for summed masses: application to controlled
substances”, Analytica Chimica Acta, Vol.683, 2010, pp. 78-83.
Walsh, M.C., “Proving beyond all reasonable doubt - analytical aspects”, Fresenius J Anal
Chem, Vol.368, 2000, pp. 553-556.
Westgard, J.O., “Managing quality vs. measuring uncertainty in the medical laboratory”,
Clin Chem Lab Med, Vol.48 No.1, 2010, pp. 31-40.
Westgard, J.O., “Precision and accuracy: concepts and assessment by method evaluation
testing”, in CRC Critical Reviews in Clinical Laboratory Sciences, Vol.13, Issue 1, 1981,
pp. 283-330.
White, G.H., “Basics of estimating measurement uncertainty”, Clin Biochem Rev, Vol.29,
Suppl (i), 2008, pp. S53-S60.
White, G.H. and Farrance, I., “Uncertainty of measurement in quantitative medical testing -
a laboratory implementation guide”, Clin Biochem rev, Vol.25 Suppl (ii), 2004, pp. S1-S24.
Williams, A., “Principles of the EURACHEM/CITAC guide ‘Use of uncertainty information in
compliance assessment’”, Accred Qual Assur, Vol.13, 2008, pp. 633-638.
Williams, A., “Measurement uncertainty in analytical chemistry”, Accred Qual Assur, Vol.1,
1996, pp. 14-17.
12/20/2012 RGG C:\Penn Uncertainty
1