Materials For Production
Lockview High School
Protec 12
Course Assignment Package
Submitted By: ______
Submitted To: Mr.Shreenan
Date: ______
Lockview High School Protec 12 NAME: ______
Materials For Production Package
(Keep all work in your Portfolio” Notes" Section)
Table Of Contents
Topics: Check when Complete.
Metalworking
Plastics
Woodworking
Synthetics And Composite Materials
Internet Resource:
Metalworking Worksheet
Lockview High School Protec 12 Name: ______
Mr.Shreenan
**This worksheet is available on my web page for links to the hyperlinked sites.
^First look at the Power Points On your Exptec ‘N’Drive
^Then answer these questions:
Metals and their Properties (ppt)
1.What is the difference between ferrous and non-ferrous metals?
______
2.Two examples of ferrous metals.
A______B______
3.Two examples of non-ferrous metals.
A______B______
4. Two examples of ‘Pure Metals’.
A______B______
5. Two examples of ‘Alloys’.
A______B______
6.A ______is made of only one type of metal and appears in the Periodic Table of Elements
7. ______is a mixture of metals.
7.Match the following: Place the #
1.Tensile Strength
2.Compressive Strength
3.Bending Strength
4.Shear Strength
5.Torsional Strength
6.Elasticity
7.Plasticity
8.Malleability
9.Ductility
10.Hardness
11.Toughness/Brittleness
12.Fatigue
13.Durability
Joining Metals (PowerPoint on your ‘N’Drive)
1.Two main types of joining metals
A)______: ______
B)______: ______
2.What is Soldering?
______
3. What is Brazing?
______
4.What is welding?
______
5.Name 3 types of welding.
_a)______
__b)______
___c)______
6. DRAW:
Sheet Metal Processes
Where do we find sheet metal fabrication? Check these Links.
Custom Sheet Metal Motorcycle Parts.
http://www.streetchopperweb.com/tech/0304stc_sheetmetal/
Car Parts:
http://www.cadillacville.com/default2/webstuff/model80/Pictures/Seville%20sheetmetal.jpg
Forced hot air heating system:
http://www.controls-supply.com/sheetmetal.html
Sheet metal Box
Plastics Worksheet
Lockview High School Protec 12 Name: ______
**This worksheet is available on my web page for links to the hyperlinked sites.
ALSO: See the PowerPoints on your “N Drive”(Plastics, And Working with Plastics)
Every polymer has very distinct characteristics but most polymers have the following general attributes.
1. Polymers can be very resistant to chemicals.
2.Polymers can be both thermal and electrical insulators.
3.Generally, polymers are very light in mass with varying degrees of strength.
4.Polymers can be processed in various ways to produce thin fibers or very intricate parts.
Resin Identification Code
The Society of the Plastics Industry, Inc. (SPI) introduced its resin identification coding system in1988 at the urging of recyclers around the country. A growing number of communities were implementing recycling programs in an effort to decrease the volume of waste subject to rising tipping fees at landfills.
QUESTIONS
1.Match the symbol to its name
http://www.americanchemistry.com/s_plastics/bin.asp?CID=1102&DID=4645&DOC=FILE.PDF
A) Vinyl (Polyvinyl Chloride
B) Polypropylene
C) Polyethylene Terephthalate
D) Polystyrene
E) High Density Polyethylene
F) Low Density Polyethylene
Read all about Plastics at:
http://www.americanchemistry.com/s_plastics/bin.asp?CID=1102&DID=4645&DOC=FILE.PDF
2.The two major groups of polymers are______and______.
http://www.americanchemistry.com/s_plastics/bin.asp?CID=1102&DID=4645&DOC=FILE.PDF
3. Many types of adhesives and cements are generally referred to as "glue." Probably the most familiar adhesive is a suspension of polyvinyl acetate in a water base, better known as ______- ______.
4.Names 10 recycled plastic items and tell what they may have originally been.
A
B
C
D
E
F
G
H
I
J
5. Not all types of plastics are generally recycled; tell what plastics are recycled in your area.
Woodworking Worksheet
Lockview High School Protec 12 Name: ______
**This worksheet is available on my web page for links to the hyperlinked sites.
*Start: See the PowerPoints on your Exptec “N Drive”
Timber and Manufactured Board
Questions
1.At what layer in a tree does the new growth happen?
The______Layer.
2. Seasoning of new lumber is done so they can______of the timber.
3. Two methods of converting timber:
A)______B)______
4.Define the Types of trees:
Deciduous Trees are: ______
Coniferous Trees are: ______
6.Name one tropical hardwood: ______
Name one temperate hardwood: ______
7.Temperate softwood trees grow to maturity in about ______years.
8.Name 3 production made boards:
A)______B)______C)______
9. *Do some Internet searching for the production of your 3 choices of “production made boards”
*Give the www sites that give the most information about Production.
*Where are these companies found in Canada?
10. Name and give the address, phone, and fax of 2 Lumber mills within 100
km of our school.
Some Woodworking Joints
Choosing:
Woodscrews, Adhesives, Fasteners, production-made board,
Lumber, Woodworking Machine Safety, and more...... see the Protec 12 web page.
Lockview High School Protec 12 NAME: ______
Synthetics And Composite Materials Worksheet
(Keep all work in your Portfolio” Notes" Section)
Check this Link for answers to the following questions:
http://web.archive.org/web/20041215194753/http://mst-online.nsu.edu/mstonline/manufacture/manufacturing3.htm
1.The new generation of engineering materials are often ‘designed materials’ why are they made to provide designated properties? ______
2.What are “advanced composites”? ______
3. The ‘systems approach to manufacturing’ is concerned with issues like______.
4.What is ‘Intelligent processing’ of materials (IPM)? ______
5. Another group of engineered materials is ‘smart materials’. What does this mean? ______
6.Define “biomimicking”. ______
7. The demand for better quality in products and systems has resulted in______
8. Design for disassembly is a concept that places______
9.Make a list of ‘Synthetic materials’ and where they might be used to replace traditionally utilized metals like steel. (Do An Internet Search) “GOOGLE”
______
10. A) Find three websites that explain the use of ‘Composite Materials. List them here: ______
B) Make a list of Synthetic and Composite Materials used in the Production Manufacturing of a car.
______
Please hand in your completed assignments for marking when you have finished.