Mahmoud Abdul Salam Abdul Aziz

Mahmoud Abdul Salam Abdul Aziz

Mahmoud Abdul Salam Abdul Aziz

Mailing Address: 61/A/ El Maruttia St, El-Haram, Al- Jizah

Cell phone: +2 01210339481 & +2 01014502623

Email:

Career Objective

A Mid-level position in a field related to Petroleum Engineering, where my educational background and extensive training will be of use.

Education

Bachelor of Petroleum Engineering. Faculty of Engineering, Cairo University 2012

Graduation project Grade: Very Good

Additional Courses:

  • IWCF (international well control formula), Driller level (Valid) at RandySmith (Intertek).
  • Stuck pipe prevention and Basic Well Control at RandySmith (Intertek)
  • Drilling Technology, Drilling Calculation, Drilling through equipment, Risk Assessment, safety management system, H2S, Gas tester, Rigging, First Aid, lifting and Working at height at ECDC training center.

Career Related Experience

  • Assistant Driller at Advanced Energy System (ADES) in Egypt. Aug 2016, present.
  • Offshore Rig: (Ad Marine 3), 2000 HP
  • Supervise and monitor drill floor’s activities related to the sack room and pump room, by being the direct supervisor of the Derrick man and Roughnecks.
  • Assure operations on the drill floor are executed according to safety regulations and to company policies/work instructions.
  • The safety of both drill floor crew, as support personnel are included under responsibility.
  • Ensure proper care and maintenance of drilling equipment and the drill floor structure itself.
  • Inspect and test drilling technical equipment and the mechanical cleaning equipment for drilling mud.
  • Responsible for slipping and cutting drill line.
  • String up and string down the block.
  • Assist service personnel and coordinate drill crew during operations.
  • Assist the Driller in directing and supervising the drill crew depending on operations being carried out.
  • Responsible for the drill crew working in a safe manner and with proper safety equipment.
  • Provide leadership and direction for less experienced Rig Personnel
  • Encourages appropriate professional development and training opportunities for employees.
  • Assistant Driller at Egyptian Chinese Drilling Company, Jan 2015-Jul 2016
  • (Onshore Rig: Rig 2), 1500 HP
  • The safety of both drill floor crew, as support personnel are included under responsibility.
  • Ensure proper care and maintenance of drilling equipment and the drill floor structure itself.
  • Inspect and test drilling technical equipment and the mechanical cleaning equipment for drilling mud.
  • Responsible for slipping and cutting drill line.
  • Derrick Man at Egyptian Chinese Drilling Company, Oct 2013-Dec 2014.
  • (Onshore Rig: Rig 7), 2000 HP
  • Safely and efficiently perform all duties assigned by the Driller during drilling, work over and completion operations.
  • Ensure all operations are proceeding in a safe manner and responsible for correcting or notifying
  • Responsible person of any unsafe acts and/or conditions which exist.
  • Handle drill pipe or tubing when it is being hoisted out or lowered into the hole.
  • Apprise the Driller of mud condition and pumping equipment conditions.
  • Maintain periodic check on mud weight, viscosity and add mud or chemicals as directed by the mud engineer.
  • Assist the Driller in handling day-to-day rig activities, maintenance problems and mud problems.
  • Keep shale shaker and de-sander clean when in use.
  • Floor Man at Egyptian Chinese Drilling Company, Sep 2012-Sep 2013
  • (Onshore Rig: Rig 2), 1500 HP
  • Safely and efficiently perform all duties assigned by the Driller during drilling, work over and completion operations.
  • Ensure the drill floor is kept clean and that all equipment is in its proper place.
  • Ensure all operations are proceeding in a safe manner, and responsible for correcting or notifying responsible person of any unsafe acts and/or conditions which exist.
  • Attend and participate in pre-tour, post tour, special operations and weekly safety meetings.
  • During tripping operations work assigned duties:
  • Pull and set slips.
  • Visually inspect the drill string so as to report wash outs, excessive wear, joint or thread damage.
  • Roustabout at Egyptian Chinese Drilling Company, Jun 2012-Aug 2012
  • (Onshore Rig: Rig 2), 1500 HP
  • Performed rig maintenance such as cleaning, painting, and chipping
  • Assisted the Derrick Man in mixing correct mud mix for drilling.

Field Engineer Intern, Gulf of Suez Petroleum Company (GUPCO), September 2011

  • Discovered Water Flooding Unit and The production Area.
  • Inspected KAMOSE Rig (Offshore).
  • Attended PowerPoint lecture of Logging.

Field Engineer Intern, Belayim Petroleum Company (Petrobel), August 2011

  • Discovered different types of Rigs and their components including Workover Rig.
  • Identified the Circulation of the mud system.

Field Engineer Intern, Khalda Petroleum Company, August 2010

  • Examined two Rigs and their components.
  • Explored Directional Drilling, Casing, Cement and Logging Jobs.

Field Engineer Intern, Baker Hughes Company, July 2010

  • Inspected the Drill Bits, completion & Casing tubes.
  • Discovered Logging units (Sara-1 & Sara- 2).
  • Explored LWD, MWD and the auto track of Directional Drilling.

Extra-Curricular Activities

Participant, Society of Petroleum Engineering (SPE), Spring 2010.

  • Attended Drilling class for (40 Hours)

Skills

  • Computer: Excellent Knowledge of MS Office applications: Word, Excel and PowerPoint.
  • Language: Fluent in Spoken and Written Arabic and English.
  • Personal information

Date of Birth: 2/6/1989. Nationality: Egyptian Military Status: Exempted

References Furnished Upon Request

Top View