Annex 2
to the Rules for Certification of Persons
Entitled to Operate Energy Equipment
LIST OF HEAT INSTALLATION AND TURBINE OPERATION WORKS
1. Repairs of heat installations (except heating networks and substations) with the pressure up to 1.4 MPa.
2. Testing of heat installations (except heating networks and substations) with the pressure up to 1.4 MPa.
3. Technological control and maintenance of heat installations (except heating networks and substations) with the pressure up to 1.4 MPa.
4. Operation of ancillaries to heat installations with the pressure up to 1.4 MPa.
5. Operation of protection, automation and control systems of heat installations with the pressure up to 1.4 MPa.
6. Repairs of heating networks with the conditional diameter DN up to 500 mm.
7. Testing of heating networks with the conditional diameter DN up to 500 mm.
8. Technological control and maintenance of heating networks with the conditional diameter DN up to 500 mm.
9. Repairs of heating networks with the conditional diameter DN up to and above 500 mm.
10. Testing of heating networks with the conditional diameter DN up to and above 500 mm.
11. Technological control and maintenance of heating networks with the conditional diameter DN up to and above 500 mm.
12. Operation of heating substations up to 1 MW (together with building heating systems and hot water systems).
13. Operation of heating substations up to 10 MW (together with building heating systems and hot water systems).
14. Operation of heating substations exceeding 10 MW (together with building heating systems and hot water systems).
15. Repairs of heat installations (except heating networks and substations) with the pressure up to 4.0 MPa.
16. Testing of heat installations (except heating networks and substations) with the pressure up to 4.0 MPa.
17. Technological control and maintenance of heat installations (except heating networks and substations) with the pressure up to 4.0 MPa.
18. Operation of ancillaries to heat installations with the pressure up to 4.0 MPa.
19. Testing, repairs of chemical water preparation equipment of heat installations with the pressure up to 4.0 MPa.
20. Operation of protection, automation and control systems of heat installations with the pressure up to 4.0 MPa.
21. Repairs of heat installations (except heating networks and substations) with the pressure up to 25.5 MPa.
22. Testing of heat installations (except heating networks and substations) with the pressure up to 25.5 MPa.
23. Technological control and maintenance of heat installations (except heating networks and substations) with the pressure up to 25.5 MPa.
24. Operation of ancillaries to heat installations with the pressure up to 25.5 MPa.
25. Testing, repairs of chemical water preparation equipment of heat installations with the pressure up to 25.5 MPa.
26. Operation of protection, automation and control systems of heat installations with the pressure up to 25.5 MPa.
27. Chemical cleaning of the surfaces of heat installations.
28. Masoning, isolation and painting of heat installations and repairs of chimney surfaces.
29. Operation of turbines with the power up to 1 MW.
30. Operation of turbines with the power above 1 MW.
31. Operation of protection, automation and control systems of turbines with the power up to 1 MW.
32. Operation of protection, automation and control systems of turbines with the power above 1 MW.
33.Verification of compliance with energy efficiency requirements of building air conditioning systems with the nominal power output above 12kW.
34.Verification of compliance with energy efficiency requirements of building heating systems with heating boilers of the nominal power output above 20kW.
______