MR.MOHAMED RAVUTHAR, B.E, LEED AP, BD+C Email id:
Mobile No: 0097335549599
LEED Accredited Professional, United States Green Building Council.
JOB PROFILE
USANavy FY 11 Navy Milcon Program Waterfront Development Project as LEED Engineer from Contrack International Inc. starting from training & awareness, Sustainable Development for LEED requirements to complete responsibility of planning, implementing and leading to LEED certification.
Energy and Lighting Model to assess design qualifications for each strategy & pursuant LEED credits. Implement progressivetechniques and procedures for USGBC LEED NC, EB certification. Energy modeling as per ASHRAE 90.1 2004-2007 standard and Development of Energy conservation Strategies.
Worked as a Green Building Coordinator for the Middle East Centre for Sustainable Development and specializes in the development of specific sustainability and LEED green building techniques for MECSD clients. He manages a team of six project engineers, guiding MECSD clients through the LEED Green Building Certification Process. He counsels project owners, developers, architects, designers, engineers, and contractors on sustainability implementation and LEED green building principles.
My job profile includes performing energy saving calculation, Involved LEED Commissioning.Coordinating with the contactor to implement the construction waste management plan, maintain the Indoor Air Quality during construction and before occupancy, Water use reduction, Daylight analysis, Interior building lighting design, as per ASHRAE and IESNA standard. Building Energy modeling, Energy auditing, Site investigation, Analysis of utility bill data to determine customer energy performance parameters, measurement and verification plan. Conducted Energy Audit to analyze the energy flow and dynamics of the building to reduce the amount of energy input into the building without negatively affecting the output.
EXPERIENCE
June 2013 - at present
Worked as a LEED Engineer for Contrack International Inc in Manama, Bahrain for USA Navy Milcon Program, Waterfront Development (LEED Buildings, Marine Work, Utilities and Infrastructure), Bahrain. US Navy Operation to achieve their sustainability goal of Net Zero Energy 2030. My core responsibility is to meet sustainability & environmental management requirements for all developments.
Currently I am heading and establishing sustainability department for their Bahrain operation. US Navy Waterfront Development Project comprising of 3 LEED projects.
- Preconstruction environmental and sustainability planning & implementation.
- Working with US ArmyCorps of Engineers (USACE) design team for LEED design and submittal.
- LEED projects coordination, weekly meeting and monthly LEED progress report and Project LEED AP.
- Sustainable material review against spec and approval.
- Coordination of LEED commissioning work.
- Indoor Air Quality representative.
- Construction compliance with US EPA guideline for sustainability and environment protection.
- Waste management, environmental monitoring and risk assessment.
- Implementation & documentation of all targeted LEED credits as per contractor’s role.
EXPERIENCE
January 2008 till April 2012
Worked as a Green Building Coordinatorand Team Leaderfor Middle East Centre for Sustainable Development (MECSD) in Pacific Controls LLC, Techno Park, Dubai.
Coordinate between the Design Team and Construction Team
Conduct documentation review and prepare online submittal to the USGBC LEED projects
Call design team meetings and prepare minutes for all project phases as required. Attend any periodic construction meetings pertaining to energy related issues regarding variations or deviations from the overall energy strategy
Knowledge of energy and HVAC systems allows to provide accurate and effective guidance for projects to reduce their energy consumption
Prepare LEED sheet as part of drawings with LEED related building components highlighted
Conducted detailed study of utility billing and energy usage pattern
Evaluating and documenting energy saving for obtaining Energy Star rating
Guiding the contactor to implement the construction waste management plan, maintain the Indoor Air Quality during construction and before occupancy
Providing life-cycle modeling ,simulation, analysis and optimization software and solutions for environmental performance and sustainability
Energy modeling as per ASHRAE 90.1 2004 & 2007 standards and development of Energy conservation Strategies
LEED NC, EB CI Certification for Commercial/Industrial/Residential projects as per USGBC LEED/ASHRAE standards
Conducted Eco-charrette and Green Building presentations for the project stakeholders to get feasible solution for the USGBC LEED process
Daylight and Exterior lighting simulation for Industrial, commercial/residential building, Interior building lighting design and exterior light distribution technique as per ASHRAE and IESNAstandards.
SOFTWARE KNOWLEDGE
Energy modeling / Visual DOE 4.0, AutoCADBuilding lighting / ECOTECT 5.5,DIALUX 4.10, RADIANCE, AutoCAD
1. Interior building lighting
2. Exterior Light power density calculation
3. Exterior light distribution
Daylight Simulation
4. MS-Office
USGBC LEED GREEN BUILDING PROJECTS
Involvement in USGBC Certified Projects / Project Achievement / LocationEuroleafTabak Corporation,
- Energy modeling using VisualDOE.
- Daylight and Lighting simulation using ECOTECT and Dialux
- LEED credits
- LEED commissioning
Nestle Dubai Manufacturing ,
.
- Daylight and Lighting simulation using ECOTECT and Dialux
- LEED credits
John Crane Middle East,
- Energy modeling using VisualDOE
- Daylight and Lighting simulation using ECOTECT and Dialux
- LEED credits
- LEED commissioning
TLM International FZE
- Daylight and Lighting simulation using ECOTECT and Dialux
- LEED credits
- Daylight and Lighting simulation using ECOTECT and Dialux
- LEED credits
certification
Gold rated, USGBC LEED NC v2.2 certification / Dubai, UAE
Dubai, UAE
USA Navy FY11 Navy Milcon program, US Navy Waterfront Development, Phase III
Explosives Ordnance Demolition Building, Mina Salman Port, Manama, Bahrain.
- Preconstruction environmental and sustainability planning & implementation.
- Working with US Army Corps of Engineers design team for LEED design and submittal.
- LEED projects coordination, Project LEED AP to USGBC LEED NC v 2.2,
- Sustainable material review against spec and approval.
- Coordination of LEED commissioning work.
- Indoor air quality representative.
- Construction compliance with US EPA guideline for sustainability and environment protection.
- Waste management, environmental monitoring.
( Car Show room)
- Coordinated with the consultant and contractor and client for the Energy modeling, lighting simulation, daylight simulation and Renewable energy Calculation.
- LEED credits uploaded to USGBC
- LEED commissioning
G+75 Floors, ADNOC (Abu Dhabi National Oil Company) Headquarters, Targeting Gold rating, USGBC LEED NC v2.2, Abu Dhabi, UAE
- LEED Representative for the project at Arabtec site office
- Trainings for sub contractors as per project LOA
- Training the contractor to follow LEED requirements during Construction and before occupancy time
- Coordinated with the contractor and supplier to approve the materials complying USGBC LEED requirements
- Responsible for submitting monthly construction progress report and LEED progress card to the client regardingMaterial tracking for Recycled content, Regional Materials, Construction Waste Management
Brands For Less Gold rating, USGBC LEED EB v2.2 certification, Dubai, UAE
- Coordinated with the consultant, contractor and client for the Energy modeling, lighting simulation, daylight simulation and Renewable energy Calculation
- LEED credits uploaded to USGBC
- LEED commissioning.
EXPERIENCE
November 2004 to December 2007
Worked as Embedded Testing and Development Engineer in Omni Agate Systems for 3 years. Omni Agate systems is a firm, which produce digital energy meter and Auto Meter reading with GSM Modem for various tender from various state Electricity boards and also specialist in Vehicle Tracking System (VTS).
3 years experience in Embedded Testing and DevelopmentEngineer in Energy meter domain and VTSHardware platforms / MSP430 microcontroller - Texas
Software development platform / Windows
Programming / C
JOB PROFILE
My job profile is about preparing Sample energy meter as per IEC, IS 13779, IS 14697, CBIP88 and product testing according to relevant standards, to ensure that meter gets through in the testing and also to productions the sample meter it gets through the testing. The work involves calibration, accuracy check, application software testing and EMI/EMC and product development.
Software preparation as per customer requirement and software testing.
Actively enrolled myself in latest development techniques such as AMR (AUTOMATED METER READING) and GSM Modem communication between the meter and utility company.
Extending my full support as a part of research and development team for improving the product Quality and performance.
Analyze utility bill data to determine customer energy performance parameters and Site investigations & energy audits.
Electronics circuit design and Product development.
Knowledge in Design of Electronics Circuits and Layouts (PCB) using CAD package like ORCAD Software.
Power factor correction
Design knowledge of three phase and single phase Digital Energy Meter.
Actively took part as a representative of company in various sample testing held at various electricity board labs and attended the various conferences, seminars at CPRI, ETDC.
He has involved in the quality control and Quality assurance using various techniques implementation to the Process of Digital Energy Meter production.
ACADAMIC QUALIFICATIONS
B.E (ELECTRONICS AND COMMUNICATION ENGINEERING)
From Sethu Institute of Technology, affiliated to Madurai Kamaraj University, Kariapatti, Tamil
Nadu, in May 2004 with 63%
DIPLOMA
Diploma in Electronics and Communication Engineering from Department of Technical
Education (Govt of Tamil Nadu), Chennai in may 2001 with 68%.
ATTENTED TRAINING AND SEMINAR
Attended one week training for Visual DOE 4.0 software for Energy Modeling on March 2008 at Pacific Controls Systems Headquarters building in Dubai.
Mr. Bryan Yates, Project Manager, Sustainable Design & Development Services, EMSI, USA has given five days training for DIALUX and ECOTECT software for Daylight and Artificial light on June 2008 at Pacific Controls Systems Headquarters building in Dubai.
Mr. Malcolm Lewis, PE, President and Founder, CTG Energetics has given training and seminar for LEED Commissioning and implementation on September 2008 at Pacific Controls Systems Headquarters building in Dubai.
PERSONAL PROFILE
Name : M. R. MOHAMED RAVUTHAR
Father name : M. RASHEED ALI
Date of birth : 08-06-1981
Sex :Male
Marital Status : Married
Nationality :Indian
Passport no : F0913496
Date of expiry : 28-09-2014
Language known : English,Tamil
Address for :
Communication 6/978-2, east street, Panaikulam, Ramnad-623522, Tamil Nadu, India