L20/ Revolving Doors

PROJECT:

L20/ REVOLVING DOORS

Manufacturers DORMA UK LTD.

WILBURY WAY, HITCHIN, SG4 0AB.

Tel: +44 (0)1462 477 600,

Email:

Web: www.dorma.com

Dimensions: Internal Diameter ______(2000mm – 3600mm*)

Number of wings ______(3 or 4 wing)

Clear Opening height ______(2000mm – 4000mm*)

(*Refer to technical brochure for diameter to height dependency table)

Operating System DORMA KTV-A Glazed Automatic Revolving Door with Glazed canopy

·  Central axis automatic revolving door

·  Floor mounted automatic drive unit

·  Anti vandalism brake (Option)

Activation and safety

·  Comprehensive radar and presence sensing safety system comprising movement sensors and passive and active safety devices

Drum Walls

·  Curved Framed Safety Glass (Option)

·  Metal Panelling (Option)

·  Central Midrails (Option)

Door Wings

·  Framed safety glass with central column (Option)

·  Fine framed safety glass without central column (Option)

·  Central Midrails (Option with central column)

Glazed Canopy

·  Double glazed laminated safety glass

·  Manual external night shield (Option)

Stainless Steel Floor Ring

·  Free issued by DORMA and installed by others

·  Floor matting by others

Aluminium Profile Finish

·  Satin Anodised (Option)

·  Standard RAL (Option)

·  Stainless Steel (Option)

·  Bronze Anodised (Special finish on request)

Break Out Facility Required (Option)

Not required (Option)

Locking Facility Euro profile mechanical locking in the door wings (Option)

Applicable Standards The installation shall comply with BS EN 16005

Electrical Requirements The electrical contractor shall provide a 240-volt AC mains spur to the right-hand side of the opening above and on the same face that each drive unit is fitted. The spur must be switched and fused with a central flex outlet faceplate. A 10 amp residual circuit breaker at the mains board and a 5-amp fuse at the spur shall protect the circuit.