International Standards in process

An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 September to 30 September 2013
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
PC 277 / Sustainable purchasing
ISO/CD 18617 / Sustainable purchasing
REMCO / Committee on reference materials
ISO/CD Guide 31 / Reference materials — Contents of certificates and accompanying documentation
TC 10 / Technical product documentation
ISO/CD 129-6 / Technical drawings — Indication of dimensions and tolerances — Part 6: Simplified dimensioning for mechanical engineering drawings
ISO/CD 18388 / Technical product documentation (TPD) — Relief grooves — Types and dimensioning
TC 20 / Aircraft and space vehicles
ISO/CD 18197 / Space systems — Space based services requirements for centimeter class positioning
TC 22 / Road vehicles
ISO/CD 22900-2 / Road vehicles — Modular vehicle communication interface (MVCI) — Part 2: Diagnostic protocol data unit application programming interface (D-PDU API)
ISO/CD 17488 / Road vehicles — Transport information and control systems — Detection-Response Task (DRT) for assessing selective attention in driving
TC 23 / Tractors and machinery for agriculture and forestry
ISO/CD 5681 / Equipment for crop protection — Vocabulary
ISO/CD 5682-1 / Equipment for crop protection — Spraying equipment — Part 1: Test methods for sprayer nozzles
ISO/CD 5682-3 / Equipment for crop protection — Spraying equipment — Part 3: Test method for volume/hectare adjustment systems of agricultural hydraulic pressure sprayers
TC 31 / Tyres, rims and valves
ISO/CD 4223-1 / Definitions of some terms used in the tyre industry — Part 1: Pneumatic tyres
ISO/CD 18106 / Truck and bus tyres — Methode for measuring snow grip performance — Loaded new tyres
TC 38 / Textiles
ISO/CD 17881-1 / Textiles — Determination of certain flame retardants — Part 1: Brominated flame retardants
ISO/CD 17881-2 / Textiles — Determination of certain flame retardants — Part 2: Phosphorus flame retardants
ISO/CD 17881-3 / Textiles — Determination of certain flame retardants — Part 3: Short chain paraffin flame retardants
TC 61 / Plastics
ISO/CD 18830 / Plastics — Test method for determining aerobic biodegradation of plastic materials sunk at the sea water/sandy sediment interface
TC 92 / Fire safety
ISO/CD 26367-2 / Guidelines for assessing the adverse environmental impact of fire effluents — Part 2: Compilation of environmentally significant emissions from fires
TC 108 / Mechanical vibration, shock and condition monitoring
ISO/CD 21940-11 / Mechanical vibration — Rotor balancing — Part 11: Procedures and tolerances for rotors with rigid behaviour
TC 131 / Fluid power systems
ISO/CD 21018-4 / Hydraulic fluid power — Monitoring the level of particulate contamination — Part 4: Use of the light extinction technique
TC 159 / Ergonomics
ISO/CD 9241-161 / Ergonomics of human-system interaction — Part 161: User-interface elements
TC 189 / Ceramic tile
ISO/CD 10545-13 / Ceramic tiles — Part 13: Determination of chemical resistance
ISO/CD 10545-14 / Ceramic tiles — Part 14: Determination of resistance to stains
ISO/CD 14448 / Low modulus adhesives for exterior tile finishing
ISO/DTR 17870-1 / Ceramic tiles — Guidelines for installation — Part 1: Installation of ceramic wall and floor tiles
TC 207 / Environmental management
ISO/DTS 14071 / Environmental management — Life cycle assessment — Critical review processes and reviewer competencies: Additional requirements and guidelines to ISO 14044:2006
TC 220 / Cryogenic vessels
ISO/CD 21013-3 / Cryogenic vessels — Pressure-relief accessories for cryogenic service — Part 3: Sizing and capacity determination
JTC 1 / Information technology
ISO/IEC CD 15149-1 / Information technology — Telecommunications and information exchange between systems — Magnetic field area network (MFAN) — Part 1: Air interface
ISO/IEC CD 42030 / Systems and Software Engineering — Architecture Evaluation
ISO/IEC CD 11695-1 / Identification cards — Optical memory cards — Holographic recording method — Part 1: Physical characteristics
ISO/IEC CD 11695-2 / Identification cards — Optical memory cards — Holographic recording method — Part 2: Dimensions and location of accessible optical area
ISO/IEC PDTR 19446 / ISO-Compliant Driving Licence — European driving licence — Application profile
ISO/IEC CD 18033-1 / Information technology — Security techniques — Encryption algorithms — Part 1: General
ISO/IEC CD 17823 / Colour Terminology for Office Colour Equipment
ISO/IEC CD 17991 / Method for Measuring Scanning Productivity of Digital Multifunctional Devices
DIS circulated
Period from 01 September to 30 September 2013
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
TC 4 / Rolling bearings
ISO/DIS 464 / * / Rolling bearings — Radial bearings with locating snap ring — Dimensions and geometrical tolerances (GPS) / 2013-12-27
(Revision of ISO 464:1995)
TC 8 / Ships and marine technology
ISO/DIS 17325-2 / * / Ships and marine technology — marine environment protection - Oil booms — Part 2: Strength and performance requirements / 2013-12-27
TC 17 / Steel
ISO/DIS 4990 / * / Steel castings — General technical delivery requirements
(Revision of ISO 4990:2003)
ISO/DIS 4991 / * / Steel castings for pressure purposes
(Revision of ISO 4991:2005)
ISO/DIS 4993 / * / Steel and iron castings — Radiographic inspection
(Revision of ISO 4993:2009)
ISO/DIS 9477 / * / High strength cast steels for general engineering and structural purposes
(Revision of ISO 9477:1992)
TC 20 / Aircraft and space vehicles
ISO/DIS 23462 / * / Space systems — Guidelines to define the management framework for a space project / 2013-12-27
(Revision of ISO/TR 23462:2007)
TC 21 / Equipment for fire protection and fire fighting
ISO/DIS 7240-1 / * / Fire detection and alarm systems — Part 1: General and definitions / 2013-12-24
(Revision of ISO 7240-1:2005)
TC 22 / Road vehicles
ISO/DIS 16844-4 / * / Road vehicles — Tachograph systems — Part 4: CAN interface / 2013-12-24
(Revision of ISO 16844-4:2004)
ISO/DIS 16844-6 / * / Road vehicles — Tachograph systems — Part 6: Diagnostics / 2013-12-24
(Revision of ISO 16844-6:2004)
ISO/DIS 16844-7 / * / Road vehicles — Tachograph systems — Part 7: Parameters / 2013-12-24
(Revision of ISO 16844-7:2004)
ISO/DIS 17840 / * / Road vehicles — Rescue sheet / 2013-12-27
ISO/DIS 3468 / * / Passenger cars — Windscreen defrosting and demisting systems — Test method / 2013-12-10
(Revision of ISO 3468:1989, ISO 3470:1989)
ISO/DIS 17409 / * / Electrically propelled road vehicles — Connection to an external electric power supply — Safety requirements / 2013-12-06
TC 23 / Tractors and machinery for agriculture and forestry
ISO/DIS 9635-1 / * / Agricultural irrigation equipment — Irrigation valves — Part 1: General requirements
(Revision of ISO 9635-1:2006)
ISO/DIS 9635-2 / * / Agricultural irrigation equipment — Irrigation valves — Part 2: Isolating valves
(Revision of ISO 9635-2:2006)
ISO/DIS 9635-3 / * / Agricultural irrigation equipment — Irrigation valves — Part 3: Check valves
(Revision of ISO 9635-3:2006)
ISO/DIS 9635-5 / * / Agricultural irrigation equipment — Irrigation valves — Part 5: Control valves
(Revision of ISO 9635-5:2006)
TC 28 / Petroleum products and lubricants
ISO/DIS 4263-3 / * / Petroleum and related products — Determination of the ageing behaviour of inhibited oils and fluids using the TOST test — Part 3: Anhydrous procedure for synthetic hydraulic fluids / 2014-02-27
(Revision of ISO 4263-3:2010)
ISO/DIS 17308 / * / Test method for electrical conductivity in ethanol
TC 29 / Small tools
ISO/DIS 6103 / * / Bonded abrasive products — Permissible unbalances of grinding wheels as delivered — Static testing / 2014-02-06
(Revision of ISO 6103:2005)
ISO/DIS 1711-1 / * / Assembly tools for screws and nuts — Technical specifications — Part 1: Hand-operated wrenches and sockets / 2013-12-07
(Revision of ISO 1711-1:2007)
ISO/DIS 1711-2 / * / Assembly tools for screws and nuts — Technical specifications — Part 2: Machine-operated sockets (impact) / 2013-12-07
(Revision of ISO 1711-2:2005)
TC 34 / Food products
ISO/DIS 8968-4 / * / Milk and milk products — Determination of nitrogen content — Part 4: Determination of protein and non protein nitrogen content and true protein content calculation (Reference method) / 2014-02-27
(Revision of ISO 8968-4:2001, ISO 8968-5:2001)
ISO/DIS 12966-1 / * / Animal and vegetable fats and oils — Gas chromatography of fatty acid methyl esters — Part 1: Guidelines on modern gas chromatography of fatty acid methy esters / 2014-02-27
(Revision of ISO 5508:1990, ISO 15304:2002)
TC 38 / Textiles
ISO/DIS 17299-5 / * / Textiles — Determination of deodorant property — Part 5: Metal-oxide semiconductor sensors method
ISO/DIS 18074 / * / Textiles — Identification of some animal fibres by DNA analysis method- Cashmere, wool, yak and their blends / 2013-12-27
TC 43 / Acoustics
ISO 10140-3:2010/DAmd 2 / * / Acoustics — Laboratory measurement of sound insulation of building elements — Part 3: Measurement of impact sound insulation — Amendment 2 / 2014-02-06
TC 44 / Welding and allied processes
ISO/DIS 636 / * / Welding consumables — Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels — Classification / 2014-02-13
(Revision of ISO 636:2004)
ISO/DIS 14172 / * / Welding consumables — Covered electrodes for manual metal arc welding of nickel and nickel alloys — Classification / 2014-02-13
(Revision of ISO 14172:2008)
ISO/DIS 17632 / * / Welding consumables — Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels — Classification / 2014-02-13
(Revision of ISO 17632:2004)
ISO/DIS 18278-1 / * / Resistance welding — Weldability — Part 1: Assessment of weldability for resistance spot, seam and projection welding of metallic materials / 2014-02-27
(Revision of ISO 18278-1:2004)
ISO/DIS 15012-4 / * / Health and safety in welding and allied processes — Equipment for capture and separation of welding fume — Part 4: Design requirements / 2014-02-06
ISO/DIS 15614-1 / * / Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys / 2014-02-06
(Revision of ISO 15614-1:2004, ISO 15614-1:2004/Cor 1:2005, ISO 15614-1:2004/Amd 1:2008)
ISO/DIS 15614-7 / * / Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 7: Overlay welding / 2014-02-27
(Revision of ISO 15614-7:2007)
TC 46 / Information and documentation
ISO/DIS 18626 / * / Information and documentation — Interlibrary Loan Transactions / 2013-12-06
TC 61 / Plastics
ISO/DIS 16012 / * / Plastics — Determination of linear dimensions of test specimens / 2013-12-24
(Revision of ISO 16012:2004, ISO 16012:2004/Cor 1:2005)
ISO/DIS 17541 / * / Plastics — Quantitative evaluation of scratch-induced damage and scratch visibility / 2013-11-30
ISO/DIS 10364.2 / * / Structural adhesives — Determination of the pot life (working life) of multi-component adhesives / 2013-11-03
(Revision of ISO 10364:2007)
TC 67 / Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO/DIS 13702 / * / Petroleum and natural gas industries — Control and mitigation of fires and explosions on offshore production installations — Requirements and guidelines / 2014-02-27
(Revision of ISO 13702:1999)
TC 69 / Applications of statistical methods
ISO/DIS 22514-1 / * / Statistical methods in process management — Capability and performance — Part 1: General principles and concepts
(Revision of ISO 22514-1:2009)
ISO/DIS 22514-8 / * / Statistical methods in process management — Capability and performance — Part 8: Machine performance of a multi-state production process / 2013-12-20
ISO/DIS 17258 / * / Statistical methods — Six Sigma — Benchmarking for Six Sigma
TC 76 / Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use
ISO/DIS 8536-8 / * / Infusion equipment for medical use — Part 8: Infusion equipment for single use with pressure infusion apparatus / 2014-02-27
(Revision of ISO 8536-8:2004)
ISO/DIS 8536-9 / * / Infusion equipment for medical use — Part 9: Fluid lines for single use with pressure infusion equipment / 2014-02-27
(Revision of ISO 8536-9:2004)
ISO/DIS 8536-10 / * / Infusion equipment for medical use — Part 10: Accessories for fluid lines for single use with pressure infusion equipment / 2014-02-27
(Revision of ISO 8536-10:2004)
ISO/DIS 8536-11 / * / Infusion equipment for medical use — Part 11: Infusion filters for single use with pressure infusion equipment / 2014-02-27
(Revision of ISO 8536-11:2004)
ISO/DIS 11040-4 / * / Prefilled syringes — Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling / 2013-12-05
(Revision of ISO 11040-4:2007)
ISO/DIS 11040-7 / * / Prefilled syringes — Part 7: Packaging systems for sterilized subassembled syringes ready for filling / 2013-12-05
TC 89 / Wood-based panels
ISO/DIS 16895 / * / Wood-based panels — Dry-process fibreboard
(Revision of ISO 16895-1:2008, ISO 16895-2:2010)
ISO/DIS 16893 / * / Wood-based panels — Particleboard
(Revision of ISO 16893-1:2008, ISO 16893-2:2010)
TC 96 / Cranes
ISO/DIS 12482.2 / * / Cranes — Monitoring for crane design working period / 2013-12-24
(Revision of ISO 12482-1:1995)
ISO/DIS 20332 / * / Cranes — Proof of competence of steel structures / 2013-12-27
(Revision of ISO 20332:2008)
TC 102 / Iron ore and direct reduced iron
ISO/DIS 3271 / * / Iron ores for blast furnace and direct reduction feedstocks — Determination of the tumble and abrasion indices / 2013-12-28
(Revision of ISO 3271:2007)
ISO/DIS 4695 / * / Iron ores for blast furnace feedstocks — Determination of the reducibility by the rate of reduction index / 2013-12-28
(Revision of ISO 4695:2007)
ISO/DIS 4696-1 / * / Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by static method — Part 1: Reduction with CO, CO2, H2 and N2
(Revision of ISO 4696-1:2007)
ISO/DIS 4696-2 / * / Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by static method — Part 2: Reduction with CO and N2
(Revision of ISO 4696-2:2007)
ISO/DIS 4700 / * / Iron ore pellets for blast furnace and direct reduction feedstocks — Determination of the crushing strength / 2013-12-11
(Revision of ISO 4700:2007)
ISO/DIS 7215 / * / Iron ores for blast furnace feedstocks — Determination of the reducibility by the final degree of reduction index
(Revision of ISO 7215:2007)
ISO/DIS 7992 / * / Iron ores for blast furnace feedstocks — Determination of reduction under load
(Revision of ISO 7992:2007)
ISO/DIS 8371 / * / Iron ores for blast furnace feedstocks — Determination of the decrepitation index
(Revision of ISO 8371:2007)
ISO/DIS 11256 / * / Iron ore pellets for shaft direct-reduction feedstocks — Determination of the clustering index
(Revision of ISO 11256:2007)
ISO/DIS 11257 / * / Iron ores for shaft direct-reduction feedstocks — Determination of the low-temperature reduction-disintegration index and degree of metallization
(Revision of ISO 11257:2007)
ISO/DIS 11258 / * / Iron ores for shaft direct-reduction feedstocks — Determination of the reducibility index, final degree of reduction and degree of metallization
(Revision of ISO 11258:2007)
ISO/DIS 13930 / * / Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by dynamic method
(Revision of ISO 13930:2007)
TC 121 / Anaesthetic and respiratory equipment
ISO/DIS 5356-1.2 / * / Anaesthetic and respiratory equipment — Conical connectors — Part 1: Cones and sockets / 2013-11-27
(Revision of ISO 5356-1:2004)
ISO 80601-2-13:2011/DAmd 1 / * / Medical electrical equipment — Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation — Amendment 1
TC 130 / Graphic technology
ISO/DIS 15339-1.2 / * / Graphic technology — Printing from digital data across multiple technologies — Part 1: Principles / 2013-12-27
ISO/DIS 15339-2 / * / Graphic technology — Printing from digital data across multiple technologies — Part 2: Characterized reference printing conditions / 2013-12-27
TC 138 / Plastics pipes, fittings and valves for the transport of fluids
ISO 10931:2005/DAmd 1 / * / Plastics piping systems for industrial applications — Poly(vinylidene fluoride) (PVDF) — Specifications for components and the system — Amendment 1 / 2014-02-27
ISO/DIS 3459 / * / Plastic piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under negative pressure / 2014-01-30
(Revision of ISO 3459:1976)
ISO/DIS 6259-1 / * / Thermoplastics pipes — Determination of tensile properties — Part 1: General test method / 2014-02-27
(Revision of ISO 6259-1:1997)
ISO/DIS 6259-3 / * / Thermoplastics pipes — Determination of tensile properties — Part 3: Polyolefin pipes / 2014-02-27
(Revision of ISO 6259-3:1997)
ISO/DIS 4437-4 / * / Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 4: Valves
(Revision of ISO 10933:1997)
TC 146 / Air quality
ISO/DIS 19289 / * / Meteorology — Siting classifications for surface observing stations on land / 2013-12-07
TC 147 / Water quality
ISO/DIS 13164-4 / * / Water quality — Radon-222 — Part 4: Test method using two-phase liquid scintillation counting / 2013-12-27
TC 156 / Corrosion of metals and alloys
ISO/DIS 17918 / * / Corrosion of metals and alloys — Evaluation of selective corrosion of alloys by visual inspection and hardness measurement / 2013-12-28
ISO/DIS 18086 / * / Corrosion of metals and alloys — Determination of AC corrosion — Protection criteria / 2013-12-27
TC 176 / Quality management and quality assurance
ISO/DIS 17582.2 / Quality management systems — Particular requirements for the application of ISO 9001:2008 for electoral organizations at all levels of government / 2013-11-03
TC 188 / Small craft
ISO/DIS 18854 / * / Small craft — Reciprocating internal combustion engines exhaust emission measurement — Test-bed measurement of gaseous and particulate exhaust emissions / 2014-02-27
ISO 21487:2012/DAmd 1 / * / Small craft — Permanently installed petrol and diesel fuel tanks — Amendment 1 / 2014-02-27
ISO 25197:2012/DAmd 1 / * / Small craft — Electrical/electronic control systems for steering, shift and throttle — Amendment 1 / 2014-02-27
TC 190 / Soil quality
ISO/DIS 11074 / * / Soil quality — Vocabulary / 2014-02-27
(Revision of ISO 11074:2005, ISO 11074:2005/Cor 1:2006)
ISO/DIS 17586 / * / Soil quality — Extraction of trace elements using dilute nitric acid / 2013-12-05
ISO/DIS 17601 / * / Soil quality — Estimation of abundance of selected microbial gene sequences by quantitative realtime PCR from DNA directly extracted from soil / 2013-12-27
TC 204 / Intelligent transport systems
ISO/DIS 15784-2 / * / Data Exchange involving roadside modules communication — Part 2: Centre to Field Device Communication / 2013-12-24
ISO/DIS 17575-1 / * / Electronic fee collection — Application interface definition for autonomous systems — Part 1: Charging / 2014-02-27
(Revision of ISO/TS 17575-1:2010, ISO/TS 17575-1:2010/Cor 1:2013)
TC 206 / Fine ceramics
ISO/DIS 17162 / * / Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of monolithic ceramics at room temperature — Determination of compressive strength / 2013-12-05
TC 211 / Geographic information/Geomatics
ISO/DIS 19110 / * / Geographic information — Methodology for feature cataloguing / 2014-02-06
(Revision of ISO 19110:2005, ISO 19110:2005/Amd 1:2011)
ISO/DIS 19136-2 / * / Geographic information — Geography Markup Language (GML) — Part 2: Extended schemas and encoding rules / 2013-12-06
ISO/DIS 19150-2 / * / Geographic information — Ontology — Part 2: Rules for developing ontologies in the Web Ontology Language (OWL)
ISO/DIS 19154 / * / Geographic information — Ubiquitous public access — Reference model
TC 213 / Dimensional and geometrical product specifications and verification
ISO/DIS 1660 / * / Geometrical product specifications (GPS) — Geometrical tolerancing — Profile tolerancing / 2014-02-13
(Revision of ISO 1660:1987)
TC 220 / Cryogenic vessels
ISO/DIS 20421-2 / * / Cryogenic vessels — Large transportable vacuum-insulated vessels — Part 2: Operational requirements / 2014-02-20
(Revision of ISO 20421-2:2005)
ISO/DIS 21009-2 / * / Cryogenic vessels — Static vacuum insulated vessels
— Part 2: Operational requirements / 2014-02-20
(Revision of ISO 21009-2:2006)
TC 224 / Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators
ISO/DIS 24518 / * / Activities relating to drinking water and wastewater services — Crisis management of water utilities / 2013-12-27
TC 226 / Materials for the production of primary aluminium
ISO/DIS 23201.2 / * / Aluminium oxide primarily used for production of aluminium — Determination of trace elements — Wavelength dispersive X-ray fluorescence spectrometric method / 2013-11-27
TC 238 / Solid biofuels
ISO/DIS 17828 / * / Solid biofuels — Determination of bulk density / 2014-02-13
ISO/DIS 17831-1 / * / Solid biofuels — Determination of mechanical durability of pellets and briquettes — Part 1: Pellets / 2014-02-13