Intro to Art Clay Projects
Name: Date
Learning Objectives:
Ø To create no less than 7 pieces, mandatory
o 2- 3 wheel thrown pieces successfully fired and glazed.
Ø To demonstrate all forms of handbuilding techniques in however many pieces are necessary, but no less than will equal the minimum required amount;
o coil method,
o pinch method and
o slab construction
Ø To demonstrate understanding of ceramic terms in application and use.
Suggestions and criteria that will be looked for in these choices:
5 bowls with or without handles
Original personalized design and QUALITY CRAFTSMANSHIP
Effort and Attitude
With trimmed foot
Smooth & rounded lip and foot (finishing details)
Interior surface smooth
Even wall thickness, (not to heavy)
No cracks or sags
Name and Date
5 cups with handles
Original personalized design and QUALITY CRAFTSMANSHIP
Effort and Attitude
With pulled handles, Smooth at connecting points. After attaching the handle
With trimmed foot cover with plastic for at
Smooth & rounded lip and foot (finishing details) least 24 hours.
Even wall thickness, No cracks, including where the handle is attached to the cup.
5 vases
Original personalized design and QUALITY CRAFTSMANSHIP
Effort and Attitude
A small necked pot: to small to get your hand in or touch the bottom of the pot with your finger tips.
Smooth & rounded lip and foot (finishing details)
No cracks and Not to heavy
Trimmed foot
Name and Date
1 box or 4 plates using handbulding methods
Original personalized design and QUALITY CRAFTSMANSHIP
Effort and Attitude
Min. size: 4" X 4" X 5" when bone dry.
Smooth & rounded lip
Name and Date
If choosing a box
Min. of three connecting joints
All slab joints to be well crafted with reinforcing coils and no evidence of cracks when dry.
All slabs should have an even wall thickness, (not to heavy)
Criteria to consider:
Craftsmanship, safety, responsibility, cleanliness, and creativity