International Standards in Process s7

ISO Update

Supplement to ISOfocus

December 2015

International Standards in process

An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 November to 30 November 2015
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
PC 287 / Chain of custody of wood and wood-based products
ISO/CD 38200 / Chain of custody of wood and wood-based products — Requirements
TC 4 / Rolling bearings
ISO/CD 492 / Rolling bearings — Radial bearings — Geometrical product specifications (GPS) and tolerance values
TC 12 / Quantities and units
ISO/CD 80000-11 / Quantities and units — Part 11: Characteristic numbers
TC 24 / Particle characterization including sieving
ISO/CD 18747-1 / Determination of the particle density by sedimentation methods — Part 1: Zero-velocity interpolation approach
TC 34 / Food products
ISO/CD 7305 / Milled cereal products — Determination of fat acidity
ISO/CD 2451 / Cocoa beans — Specification and quality requirements
TC 35 / Paints and varnishes
ISO/CD 11126-1 / Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 1: General introduction and classification
ISO/CD 11126-3 / Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 3: Copper refinery slag
ISO/CD 11126-4 / Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 4: Coal furnace slag
ISO/CD 11126-5 / Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 5: Nickel refinery slag
ISO/CD 11126-6 / Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 6: Iron furnace slag
ISO/CD 11126-7 / Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 7: Fused aluminium oxide
TC 45 / Rubber and rubber products
ISO/CD 8307 / Flexible cellular polymeric materials — Determination of resilience by ball rebound
ISO/CD 22762-1 / Elastomeric seismic-protection isolators — Part 1: Test methods
ISO/CD 22762-2 / Elastomeric seismic-protection isolators — Part 2: Applications for bridges — Specifications
ISO/CD 22762-3 / Elastomeric seismic-protection isolators — Part 3: Applications for buildings — Specifications
TC 70 / Internal combustion engines
ISO/CD 8178-1 / Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
ISO/CD 8178-4 / Reciprocating internal combustion engines — Exhaust emission measurement — Part 4: Steady-state test cycles for different engine applications
TC 71 / Concrete, reinforced concrete and pre-stressed concrete
ISO/CD 13315-8 / Environmental management for concrete and concrete structures — Part 8: Environmental labels and declarations of concrete
TC 92 / Fire safety
ISO/CD 13943 / Fire safety — Vocabulary
TC 94 / Personal safety -- Protective clothing and equipment
ISO/CD 15384 / Protective clothing for firefighters — Laboratory test methods and performance requirements for wildland firefighting clothing
TC 105 / Steel wire ropes
ISO/CD 3108 / Steel wire ropes for general purposes — Determination of actual breaking load
TC 107 / Metallic and other inorganic coatings
ISO/CD 20274 / Vitreous and porcelain enamels — Preparation of enamelled samples and determination of thermal expansion coefficient
TC 108 / Mechanical vibration, shock and condition monitoring
ISO/CD 13373-7 / Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 7: Diagnostic techniques for machine sets in hydraulic power generation and pump-storage plants
ISO/CD 20816-5 / Mechanical vibration — Measurement and evaluation of machine vibration — Part 5: Machine sets in hydraulic power generating and pump-storage plants
TC 122 / Packaging
ISO/CD 20848-3 / Packaging — Plastics drums — Part 3: Plug/bung closure systems for plastics drums with a nominal capacity of 113,6 l to 220 l
TC 126 / Tobacco and tobacco products
ISO/CD 13276 / Tobacco and tobacco products — Determination of nicotine purity — Gravimetric method using tungstosilicic acid
TC 127 / Earth-moving machinery
ISO 7131:2009/CD Amd 1 / Earth-moving machinery — Loaders — Terminology and commercial specifications — Amendment 1
TC 134 / Fertilizers and soil conditioners
ISO/CD 7409 / Fertilizers — Marking — Presentation and declarations
TC 138 / Plastics pipes, fittings and valves for the transport of fluids
ISO/CD 11295 / Classification and information on design and applications of plastics piping systems used for renovation and replacement
TC 145 / Graphical symbols
ISO 7010:2011/CD Amd 188 / Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 188: Safety sign E021: Protection shelter
ISO 7010:2011/CD Amd 189 / Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 189: Safety sign P044: Use of smart glasses prohibited
TC 147 / Water quality
ISO/CD 20595 / Water quality — Determination of selected easily volatile organic compounds in water — Method using gas chromatography and mass spectrometry by static headspace technique (HS-GC-MS)
TC 163 / Thermal performance and energy use in the built environment
ISO/CD 20310 / Thermal insulation — Aluminium silicate wool products — Specification
TC 165 / Timber structures
ISO/CD 12122-6 / Timber structures — Determination of characteristic valu — Part 6: Large components and assemblies
TC 206 / Fine ceramics
ISO/CD 19618 / Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement method for normal spectral emissivity using blackbody reference with an FTIR spectrometer
TC 215 / Health informatics
ISO/CD 17117-1 / Health informatics — Terminological resources — Part 1: Characteristics
TC 229 / Nanotechnologies
ISO/DTS 11888 / Nanotechnologies — Characterization of multiwall carbon nanotubes — Mesoscopic shape factors
ISO/DTR 18637 / Overview of available frameworks for the development of occupational exposure limits and bands for nano-objects and their aggregates and agglomerates (NOAA)
TC 269 / Railway applications
ISO/DTR 21245-1 / Railway applications — Generic standards for rail project planning process — Part 1: Stakeholders and their needs/interests
ISO/DTR 21245-2 / Railway applications — Generic standards for rail project planning process — Part 2: Conditions
JTC 1 / Information technology
ISO/IEC PDTR 29125 / Information technology — Telecommunications cabling requirements for remote powering of terminal equipment
DIS circulated
Period from 01 November to 30 November 2015
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
PC 277 / Sustainable procurement
ISO/DIS 20400 / * / Sustainable procurement — Guidance / 2016-02-13
TC 5 / Ferrous metal pipes and metallic fittings
ISO/DIS 9349 / * / Preinsulated ductile iron pipeline systems / 2016-02-20
(Revision of ISO 9349:2004)
TC 8 / Ships and marine technology
ISO/DIS 19697 / * / Ships and marine technology — Navigation and ship operations — Electronic inclinometers / 2016-02-20
(Revision of ISO/PAS 19697:2014)
TC 20 / Aircraft and space vehicles
ISO/DIS 6858 / * / Aircraft — Ground support electrical supplies — General requirements / 2016-02-27
(Revision of ISO 6858:1982)
ISO/DIS 20683-1 / * / Aircraft ground equipment — Design, test and maintenance for towbarless towing vehicles (TLTV) interfaced with nose-landing gear — Part 1: Main-line aircraft / 2016-02-06
(Revision of ISO 20683-1:2005)
ISO/DIS 20683-2 / * / Aircraft ground equipment — Design, test and maintenance for towbarless towing vehicles (TLTV) interfaced with nose-landing gear — Part 2: Regional aircraft / 2016-02-06
(Revision of ISO 20683-2:2004)
ISO/DIS 17666 / * / Space systems — Risk management / 2016-02-20
(Revision of ISO 17666:2003)
TC 21 / Equipment for fire protection and fire fighting
ISO/DIS 8201 / * / Acoustics — Audible and other emergency evacuation signals / 2016-02-20
(Revision of ISO 8201:1987)
TC 22 / Road vehicles
ISO/DIS 16845-1 / * / Road vehicles — Controller area network (CAN) conformance test plan — Part 1: Data link layer and physical signaling / 2016-02-20
(Revision of ISO 16845:2004)
TC 24 / Particle characterization including sieving
ISO/DIS 22412 / Particle size analysis — Dynamic light scattering (DLS) / 2016-02-06
(Revision of ISO 13321:1996, ISO 22412:2008)
TC 28 / Petroleum products and related products of synthetic or biological origin
ISO/DIS 19291 / * / Testing of lubricants — Tribological test in the translatory oscillation apparatus — Determination of tribological quantities for oils and greases in the translatory oscillation apparatus / 2016-02-06
TC 34 / Food products
ISO 16654:2001/DAmd 1 / * / Microbiology of food and animal feeding stuffs — Horizontal method for the detection of Escherichia coli O157 — Amendment 1: Annex B: Result of interlaboratory studies / 2016-02-20
TC 35 / Paints and varnishes
ISO/DIS 19403-1 / * / Paints and varnishes — Wettability — Part 1: Terminology and general principles / 2016-02-13
ISO/DIS 19403-2 / * / Paints and varnishes — Wettability — Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle / 2016-02-13
ISO/DIS 19403-3 / * / Paints and varnishes — Wettability — Part 3: Determination of the surface tension of liquids using the pendant drop method / 2016-02-13
ISO/DIS 19403-4 / * / Paints and varnishes — Wettability — Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension / 2016-02-13
ISO/DIS 19403-5 / * / Paints and varnishes — Wettability — Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy / 2016-02-13
ISO/DIS 19403-6 / * / Paints and varnishes — Wettability — Part 6: Measurement of dynamic contact angle / 2016-02-13
ISO/DIS 19403-7 / * / Paints and varnishes — Wettability — Part 7: Measurement of the contact angle on a tilt stage (roll-off angle) / 2016-02-13
ISO/DIS 15741 / * / Paints and varnishes — Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases / 2016-02-20
(Revision of ISO 15741:2001)
TC 46 / Information and documentation
ISO/DIS 17068 / * / Information and documentation - Trusted third party repository for digital records / 2016-02-20
(Revision of ISO/TR 17068:2012)
TC 58 / Gas cylinders
ISO 12209:2013/DAmd 1 / * / Gas cylinders — Outlet connections for gas cylinder valves for compressed breathable air — Amendment 1: Outlet connection up to a maximum cylinder working pressure of 500 bar / 2016-02-06
ISO/DIS 19016 / * / Gas cylinders — Cylinders and tubes of composite construction — Modal acoustic emission (MAE) testing for periodic inspection and testing / 2016-02-05
TC 61 / Plastics
ISO/DIS 17880 / * / Cellular plastic — Self-supporting metal faced sandwich panels — Complementary element / 2016-02-13
TC 69 / Applications of statistical methods
ISO/DIS 22514-5 / * / Statistical methods in process management — Capability and performance — Part 5: Process capability estimates and performance for attributive characteristics / 2016-02-27
ISO 11843-5:2008/DAmd 1 / * / Capability of detection — Part 5: Methodology in the linear and non-linear calibration cases — Amendment 1 / 2016-02-06
TC 94 / Personal safety -- Protective clothing and equipment
ISO/DIS 9151.2 / * / Protective clothing against heat and flame — Determination of heat transmission on exposure to flame / 2016-01-20
(Revision of ISO 9151:1995)
ISO/DIS 15025 / * / Protective clothing — Protection against flame — Method of test for limited flame spread / 2016-02-06
(Revision of ISO 15025:2000)
ISO 20471:2013/DAmd 1 / * / High visibility clothing — Test methods and requirements — Amendment 1 / 2016-02-27
TC 108 / Mechanical vibration, shock and condition monitoring
ISO 5344:2004/DAmd 1 / * / Electrodynamic vibration generating systems — Performance characteristics — Amendment 1 / 2016-02-06
ISO 8626:1989/DAmd 1 / * / Servo-hydraulic test equipment for generating vibration — Method of describing characteristics — Amendment 1 / 2016-02-06
ISO 15261:2004/DAmd 1 / * / Vibration and shock generating systems — Vocabulary — Amendment 1 / 2016-02-20
TC 113 / Hydrometry
ISO/DIS 6420 / * / Hydrometry — Position fixing equipment for hydrometric boats / 2016-02-20
(Revision of ISO 6420:1984)
TC 119 / Powder metallurgy
ISO/DIS 3928 / * / Sintered metal materials, excluding hardmetals — Fatigue test pieces / 2016-02-06
(Revision of ISO 3928:1999)
TC 121 / Anaesthetic and respiratory equipment
ISO/DIS 18562-1 / * / Biocompatibility evaluation of breathing gas pathways in healthcare applications — Part 1: Evaluation and testing within a risk management process / 2016-02-13
ISO/DIS 18562-2 / * / Biocompatibility evaluation of breathing gas pathways in healthcare applications — Part 2: Tests for emissions of particulate matter / 2016-02-13
ISO/DIS 18562-3 / * / Biocompatibility evaluation of breathing gas pathways in healthcare applications — Part 3: Tests for emissions of volatile organic compounds (VOCs) / 2016-02-13
ISO/DIS 18562-4 / * / Biocompatibility evaluation of breathing gas pathways in healthcare applications — Part 4: Tests for leachables in condensate / 2016-02-13
TC 130 / Graphic technology
ISO/DIS 13655 / * / Graphic technology — Spectral measurement and colorimetric computation for graphic arts images / 2016-02-27
(Revision of ISO 13655:2009)
ISO/DIS 17972-3 / * / Graphic technology — Colour data exchange format (CxF/X) — Part 3: Output target data (CxF/X-3) / 2016-02-06
TC 131 / Fluid power systems
ISO/DIS 15552 / * / Pneumatic fluid power — Cylinders with detachable mountings, 1 000 kPa (10 bar) series, bores from 32 mm to 320 mm — Basic, mounting and accessories dimensions / 2016-02-20
(Revision of ISO 15552:2004)
TC 135 / Non-destructive testing