Instructions Update 15 Apr 07

For error free Photo printing:

Begin Aura session with “Photo Stable” setting.

Keep Aura Rate in the middle, or set to slow, do not speed it up.

When program is finished Calibrating, Click Snapshot THEN (this is important)

When the dialogue box comes up, click YES right away (immediately) in order for the snapshot to match the report picture…

Otherwise, the customer can see the printout, get excited and change his/her aura color!

Using 41/4 X 51/2 paper is best you can get 8.5X11 inch paper and Email me for a

If when you install is seems to stop installing close the install window and you will see the next window which windows put behind.

You may run into WinAura is already running error if this comes just click and hold the ALT DELete and Ctrl keys at the same time. Then select WinAura and click End Process, when the box saying do you want to send report choose “Do not send” These problems have been fixed in the new version now in testing.

WinAura 6.3(June 06)

Click yes when you see the Active content window

New features! You can now change settings from inside WinAura, so you can save key points. (This feature does not work for Holistic Session.) Other new additions include Snapshots with graphs or of the screen which can print 4X6 photo size 4 ½ X 5 ½ works best. The first feature uses two key points for the first snapshot, and the second and third snapshots use only one key point. If you print with graphs too, you will use up one key point.

WinAura Record:

This program is currently experimental, and some features may not work properly. Visit our website for the instructions, they can be found under the Support heading. If this is something that you can use, please call us for complete licensing.

WinAura 3D:

For WinAura 3D to run, you will need to uninstall all old versions of WinAura and install WinAura version 6.3. Then, install WinAura 3D from the CD. WinAura 3D requires a special 3D dongle Key; in order to receive it, contact Thavy (650) 261-0190 and order the $400 key. The 3D key is good for regular WinAura as well.

WinAura 3D uses three points every time someone puts their hand on the sensor, and one point for every print out. So be aware of your point usage, as WinAura 3D will use more points than regular WinAura for a session, although WinAura 3D uses only one point for a print out. (The print out is limited to what you see on the screen.) We have many more features to add to WinAura 3D when it is complete. We intend to eventually integrate WinAura 3D into regular WinAura.

Other new features: The “Active Aura” feature will now make your colors come alive! Better yet, turn on “High sensitivity” at the same time for super sensitivity. These features may be more accurate for sessions, although it may lower accuracy for printouts. You can switch “Active Aura” back and forth from change sessions. Take a look at WinAura Session Program seen on your computer desktop. This program will allow you to record your sessions on a CD or DVD. If things do not work in WinAura Record a Session try slowing down the “Aura Rate”

See the complete instructions on your WinAura 3D CD, or go to our website at ; Go to “Support” and click on “Manuals”.