TA1/999 Response
Input Queue: Primary Input Queue (PrimaryInput)
Action Settings
These settings modify how the file for this action is generated.
Create Response: This setting controls the creation of TA1, and 999 acknowledgments. If no response is needed when there are no errors, you can suppress the acknowledgment. Note: Selecting 'Only when errors are found' with an Acknowledgment Mode setting of 'Accept (don't report errors)' will result in NO file being created, regardless of the errors present. Current Value: Always
Create TA1: Control the creation of the TA1 segment with this setting. Current Setting: Always create a TA1
Acknowledgment Mode: When syntax errors are encountered in the message, prepare the acknowledgment codes in the manner specified. Current Value: Reject Entire Group (GS-GE) for any syntax error
Reflect Transaction Set Errors in Functional Group Acknowledgement Code (AK901)? If any AK501 error is reported (AK501=R or E), this will cause the AK901 to report an error as well. Current Value: YES
Suppress AK2/AK5 & IK2/IK5 segments when AK501=A or IK501=A? If 'Yes' and transaction set AK501=A and/or IK501=A then AK2/AK5 and/or IK2/IK5 segments are not included in the report.Current Value:NO
Top of Form
Exclusion Lists
When generating the output file for this action, Optum Transaction Validation Manager can use one or moreExclusion Liststo eitherincludeorexcludespecific errors or messages from the output (or from being considered while generating the output). To create or modify an Exclusion list, use the "Lists" menu item.
When preparing the list of errors or messages to be used when building the report, the following logic is used:
1) Start with all errors and messages generated during analysis
2) Includeonlyerrors and messages found onallselectedInclusionlists (if any)
3) Remove errors and messages found onanyselectedExclusionlists (if any)
/ Accept 999-999-9999
Accept 999-999-9999
/ 1 (Show)
/ Acceptable H1 Errors
List of H1 errors we can ignore.
/ 1 (Show)
/ Acceptable H4 Errors
Acceptable H4 Errors
/ 5 (Show)
/ Exclude N* Errors
/ 1 (Show)
/ Exclude W warnings
Exclude W warnings
/ 1 (Show)
/ Ignore B Warnings
/ 1 (Show)
/ Ignore P warnings
Ignore P warnings
/ 1 (Show)
/ Ignore Unused HIPAA Errors
Ignore Unused HIPAA Errors
/ 3 (Show)
/ Ignore Y-code errors
Ignore Y-code errors
/ 1 (Show)
Bottom of Form