Huaxia high-pressure flexible rubber hose Co.,Ltd

SPECIFICATIONS
To See details regarding each Hammer Lug Union, click on the Figure Number in the table below: /











Fig No. / Color key for standard service / Pressure Rating (psi) / Nominal Pipe Sizes inches/mm
Standard Service / Sour Gas Service / 1
25 / 11/4
32 / 11/2
40 / 2
50 / 21/2
65 / 3
80 / 4
100 / 5
125 / 6
150 / 8
200
Cold Working / TEST / Cold Working / TEST
50 / / 500 / 750 / N/A / N/A / /
100 / / 1,000 / 1,500 / N/A / N/A / / / / / / /
200 / / 2,000 / 3,000 / 2,000 / 3,000 / / / / / / / / / /
206 / / 2,000 / 3,000 / 2,000 / 3,000 / / / / / / / / / /
207 / / 2,000 / 3,000 / 2,000 / 3,000 / / /
600 / / 6,000 / 9,000 / N/A / N/A / / / / / /
602 / / 6,000 / 9,000 / 6,000 / 9,000 / / / / / /
1002 / / 10,000 / 15,000 / 7,500 / 11,250 / / / / / / / /
1003 / / 10,000 / 15,000 / 7,500 / 11,250 / / / /
1004 / / 10,000 / 15,000 / 7,500 / 11,250 / /
1502 / / 15,000 / 22,500 / 10,000 / 15,000 / / / / / / /
2002 / / 20,000 / 30,000 / N/A / N/A / / / / /
2202 / / N/A / N/A / 15,000 / 22,500 / / / / /
Please Note:
1. Available Butt Weld only: All Fig 2002-2202, 4", 5" & 6" Fig 1502, 5" & 6" Fig 1002-1004 & 5" Fig 1003.
2. For other sizes and types, please consult the factory.
3. Pressure ratings are dependent upon type and wall thickness of pipe used.
4. For Standard Service, Fig 1003 4" and 5", Fig 1002 5" and 6" respectivley, are pressure rated at 7,500 psi cwp and 11,250 psi test. For Sour Gas Service they are rated at 5,000 psi cwp and 7,500 psi test respectivley.
5. IF AT ALL IN DOUBT, PLEASE ASK!
The Anson suction and low pressure Figure 50 is manufactured from steel throughout and is available Threaded or Socket Weld in 4 inch or 5 inch sizes. The same nut and 'O' ring are used in both sizes, male and female blanking caps are also available.
The Anson Figure 50 is so named because it is designed to withstand 500 psi cold working pressure (35 bar).
LINE PIPE THREAD / SOCKET WELD
Size Inch / Weight (lbs) / Mass (Kg) / Nut Radius A / Total Length B / Weight (lbs) / Mass (Kg) / Total Length B
4" / 27.5 / 12.5 / 5.13" / 6.00" / 26.0 / 11.8 / 4.06"
5" / 22.0 / 10 / 5.13" / 5.62" / 20.5 / 9.3 / 4.06"
Note: Where dimensions and weight are critical please consult the factory
A low pressure general purpose threaded union suitable for air, water, oil or gas service. ANSON Fig.100 unions are manufactured from steel, not cast iron. This has enabled us to reduce the weight and physical dimensions, at the same time retaining interchangeability with our competitors inferior brands.
The Figure 100 gets its name from its ability to withstand 1,000 psi cwp (69 bar)
LINE PIPE THREAD
Size Inch / Weight (lbs) / Mass (Kg) / Nut Radius A / Total Length B / Body Diameter C
2" / 4.8 / 2.2 / 2.88" / 3.23" / 2.75"
2.1/2" / 10.0 / 4.5 / 3.50" / 4.25" / 3.38"
3" / 16.5 / 7.5 / 4.06 / 4.56" / 4.12
4" / 23.0 / 10.5 / 4.56" / 4.83" / 5.12"
5" / 32.5 / 14.8 / 5.75" / 6.00" / 6.38"
6" / 47.5 / 21.6 / 6.50" / 6.84" / 7.38"
8" / 66.0 / 30 / 7.25" / 7.19" / 9.56"
Note: Where dimensions and weight are critical please consult the factory
A general purpose, all steel constructed union designed to meet a variety of applications up to and including service at 2000 pounds per square inch. The Figure 200 is a compact and economical union, available with Threaded and ButtWeld ends.
LINE PIPE THREAD
Size Inch / Weight (lbs) / Mass (Kg) / Nut Radius A / Total Length B / Body Diameter C
1" / 1.7 / 0.8 / 2.00" / 2.48" / 1.59"
1.1/4" / 2.2 / 1.0 / 2.25" / 2.78" / 2.00"
1.1/2" / 2.7 / 1.2 / 2.44" / 2.90" / 2.28"
2" / 4.8 / 2.2 / 2.88" / 3.19" / 2.75"
2.1/2" / 8.4 / 3.8 / 3.50" / 4.12" / 3.31"
3" / 14.8 / 6.7 / 3.88" / 4.59" / 4.09"
4" / 18.2 / 8.3 / 4.50" / 4.94" / 5.12"
5" / 32.5 / 14.8 / 5.75" / 6.00" / 6.38"
6" / 47.5 / 21.6 / 6.50" / 6.84" / 7.38"
8" / 66.0 / 30 / 7.25" / 7.19" / 9.56"
Note: Where dimensions and weight are critical please consult the factory
Butt Weld Sch 40 / ButtWeld Sch 80
Size Inch / Weight (lbs) / Mass (Kg) / Nut Radius A / Total Length B / Weight (lbs) / Mass (Kg) / Total Length B
2" / 5.4 / 2.5 / 2.88" / 3.15" / 5.7 / 2.6 / 3.25"
3" / 11.8 / 5.7 / 3.88" / 4.00" / 12.4 / 5.6 / 4.14"
4" / 14.8 / 6.7 / 4.50" / 4.82" / 16.0 / 7.3 / 4.98"
5" / 35.2 / 14.8 / 5.75" / 6.00" / 37.5 / 17.0 / 6.17"
6" / 47.8 / 21.7 / 6.50" / 5.82" / 51.2 / 23.3 / 6.06"
8" / 68.5 / 31.1 / 7.25" / 6.91" / 74.5 / 33.9 / 7.19"
Note: Where dimensions and weight are critical please consult the factory

NO 18, Yongxing west road Hengshui city Hebei province china.

Tel: 0086-318-2152518 2152978 2152338

Fax:0086-318-2152338