Heat pumps from Viessmann: efficient heat generation with renewable energy and electricity
What’s new at a glance:
-This year, Viessmann is launching a whole new series of innovative air/water heat pumps in split and monoblock design on the market. These units will set new standards with their unusually quiet operation and sophisticated design:
- Innovativeexternal units:with anoise pressure level of only 35 dB(A) at a distance of three meters, these are the quietest units of their type.
- New Vitocal 200-S and 222-S split-design air/water pumps with outputs from four to twelve kW and a peak COP of up to 5.1 (at A7/W35°C).
- New Vitocal 200-A air/water monoblock heat pump with outputs from four to twelve kW and a COP of up to 5.1 (at A7/W35°C).
-Efficient DHW generation with the new Vitocal 060-A hot water heat pump.
-Innovative Vitocal 350-HT Pro high-temperature heat pump with flow temperatures up to 90°C for waste heat usage inindustry and commerce.
Extra bonus with the purchase of“GrundgrünerWärmestrom” electricity
Operators of a Vitocal heat pump profit from an extra bonus when they change to “GrundgrünerWärmestrom” electricity ( They get green electricity exclusively from Germany, are not tied to a minimum term of contract, and can be sure of a full price guarantee for twelve months.
External units for air/water heat pumps in split and monoblock design that are as quiet as a whisper
With the innovative, ultra-quiet external units, air/water heat pumps can even be used in densely built-up residential areas. When running at night, their noise pressure level at a distance of three meters is a mere 35 dB(A). Thus, these new external units are by far the quietest of this type and meet the requirements of the German Technical Instructions on Noise Protection (TA Lärm).
Advanced Acoustic Design
This extremely low noise level of the external units is provided by Advanced Acoustic Design (AAD). This means that the frequency spectrum is purposely shifted so that the low tones are in a frequency range that is effectively muffled by the surrounding buildings. What is more, the low-noise fans with a fully variable speed control also do their part.
The double elastic vibration isolation and the acoustically optimized structure of the refrigerant cycle effectively prevent the housing and refrigerant piping from giving off structure-borne noise. This makes it practically impossible for any vibrations to spread to the building.
Low operating costs thanks to high level of efficiency
Apart from the speed-controlled scroll compressor, high levels of efficiency are also guaranteed by the asymmetric dimensions of the heat exchangers. Characteristic of this special heat exchanger layout is that the duct cross-sections on the water side areconsiderably larger than on the refrigerant side. This enhances heat transfer and lowers the amount of electricity consumed by the circulation pump. The new Vitocal 200-S, 222-S and 200-A air/water heat pumps thus achieve a peak COP of up to 5.1 (at A7/W35°Cin accordance withEN 14511).
High quality and modern design
Made in Germany withhigh-quality Viessmann components,these air/water heat pumps are guaranteed to have a long lifespan. Thanks to their timeless, modern design and elegant, anthracite gray color, they clearly set themselves apart from conventional external units from the Far East. They harmonize with almost every house front.
Installationandservice
Their low noise level allows these external units to be installed almost regardless of the specific structural conditions, such as in densely built-up townhouse complexes. Owing to the sound-deadening refrigerant cycle, no additional steps are necessary to prevent structure-borne noise. This makes installation much easier. Service is also particularlyuncomplicated, since all relevant components are easily accessible.
Advantages for trade partners
-Easy installation thanks to structure-borne sound-deadeningrefrigerant cycle
-Comfortable service thanks to easy accessibility of all maintenance-relevant components
-High-quality components for long-lasting, robust operation
-Easily meets the legal noise requirements (TA Lärm)
-Especially quiet operation thanks to Advanced Acoustic Design (AAD), suitable even for densely built-up residential areas
Advantages for users
-Especially quiet thanks to Advanced Acoustic Design (AAD)
-Can be remote controlled by way of Vitoconnect (accessory) with the ViCare app (Vitocal 200-S, 222-S, 200-A)
-Low electricity consumption thanks to high efficiency in full and partial load operation – COP 5.1 (at A7/W35 in accordance with EN 14511)
-High product quality – made in Germany
-Timeless, moderndesign
Technical data
-Device with one fan:
Outputs from4.0to 7.0 kW*
Width x height x depth: 1109 x 753 x 546 mm
Weight: 94 to 99 kg
-Unit with two fans:
Outputs from 9.4to 12.0 kW*
Width x height x depth: 1109 x 1377 x 546 mm
Weight: 137 to 148 kg
* Output indicated for A-7/W35°Cin accordance with EN 14511
Delivery date
The new external units for the Vitocal 200-S and 200-A air/water heat pumps will be available starting in April 2017 and for the Vitocal 222-S starting in August 2017.
Vitocal 200-S and 222-S: new air/water split-design heat pumps for modernization and new buildings
The new Vitocal 200-S and 222-S split-design air/water heat pumps are by far the quietest units of their type. This means they can be used without any problems even in densely built-up areas where conventional split-design heat pumps cannot, such as townhouse complexes.
Innovative noise reduction concept
Both internal and external Vitocal 200-S and 222-S units have been redesigned. With their innovative noise reduction concept, Advanced Acoustic Design (AAD), these units are quieter than refrigerators and meet the requirements of the German Technical Instructions on Noise Protection (TA Lärm).
Available as wall-mounted and compact unit
Vitocal 200-S is the space-saving wall-mounted unit, Vitocal 222-S the compact unit with an integrated 220-liter DHW cylinder. As compact internal units, both contain all the essential components for transferring heat to the heating and DHW generationsystems.
Both heat pumps are offered in versions for heating only or for both heating and cooling, as desired. In the versions with cooling, the refrigerant cycle switches over so that cool water is available to the building in the summertime. Depending on the external unit, the heat output amounts to between 4 and 12 kW (at A-7/W35°C), the cooling capacity between 3 and 9 kW (A35/ W 18°C). The maximum flow temperature for heating is 60°Celsius, for cooling either 18°C (floor heating) or 7°C (for example, fan coil unit) as desired.
High level of efficiency at low electricity costs
Speed-controlled scroll compressors and asymmetrically dimensioned heat exchangers with optimized duct cross-sections in the condenser enable a COP of up to 5.1 (at A7/W35°C in accordance withEN 14511). This makes for low electricity consumption and accordingly low electricity costs. The units are ranked in the highest energy efficiency class, A++.
Comfortable control, even with an app, if desired
The Vitotronic control of the split-design heat pumps enables comfortable, intuitive control. The large illuminated display shows operating times and heating curves in the form of easy-to-read graphs, and notifications are displayed in clear text. If the home has a Vitovent 300-W or 300-F centralized ventilation system, it can control that, as well.
If desired, the heat generators can also be controlled on a smartphone with the easy-to-install Vitoconnect Internet interface and the free ViCare app, available as accessories. Temperatures and individual heating times can then be quite simply remote controlled.
Digital service with Vitoguide
If the split-design heat pumps are connected to the Internet interface, the homeowner can authorize a specialist company to monitor the system using Vitoguide. This software tool enables the specialist company to always keep an eye on the system, recognize possible problems in good time, make settings without having to come to the home, and have plenty of time toplan and perform service calls.
Quick installation
These compact, especially quiet internal units can be hung on a wall (Vitocal 200-S) or installed standing on the floor (Vitocal 222-S) even right next to living quarters. The units are preassembled at the factory so they can be installed in a very short time, and the external units already have enough refrigerant for up to 12 meters of piping.
Advantages for trade partners
-Can even be used in townhouse complexes thanks to Advanced Acoustic Design (AAD)
-Runs quietly enough to easily meet all legal noise requirement (TA Lärm)
-Robust and long-lasting operation thanks to high-quality components made in Germany
-Internal units easy and quick to install
-Facilitates service because all service-relevant components areeasily accessible from the front
Advantages for users
-Especially quiet thanks to Advanced Acoustic Design (AAD)
-Heating and cooling with one device thanks toreverseoperation
-Low electricity consumption thanks to high level of efficiency when heating and cooling
-Easy-to-useVitotroniccontrol with clear text and graphic display
-Centralized control and monitoring ofVitovent 300-W and 300-F ventilation units with the Vitotronic 200 heat pump control
-Can be remote controlled with Vitoconnect (accessory) and the ViCare app
-Readytouse self-generated electricity, for example,from photovoltaic systems
-Meets the requirements of many state subsidy programs
Technical data
-Heat output: 4 to 12 kW (at A-7/W35°C)
-Cooling capacity: 3 to 9 kW (at A35/W18°C)
-COP in accordance with EN 14511: up to4.0at A2/W35°C.
up to 5.1at A7/W35°C
-EER (Energy EfficiencyRatio): up to 4.0 (at A35/W18°C)
-Flow temperatures: up to 60°C (heating). 18°C (cooling with floor heating) or 7°C (cooling with fan coil unit)
-Energy efficiency class: A++
Delivery date
The new Vitocal 200-S split-design air/water heat pumps will be launched on the market starting in April 2017, the new Vitocal 222-S starting in August 2017.
Vitocal 200-A: new air/water heat pump in monoblock design
The new Vitocal 200-A monoblock heat pump with its innovative Advanced Acoustic Design (AAD) is guaranteed torun as quiet as a whisper. So even installing it near the neighbor’s property will not cause any problems.
Especially quiet external heat pump
The new monoblock heat pump contains the entire refrigerant cycle and is connected to the hydraulic system installed inside by way of water-filled connecting pipes. Advanced Acoustic Design (AAD) provides for the extremely low noise level of the external units.
Peak COP of 5.1
High efficiency makes for high seasonal performance factors and low operating costs. With a COP of 5.1 (at A7/W35°Cin accordance with EN 14511), the Vitocal 200-A is highly efficient and therefore ranks in the highest energy efficiency class, A++.
Building cooling model
The Vitocal 200-A also comes in a model for heating and cooling. This saves having to invest in an additional air conditioner.
Vitotronic 200 control with WLAN option
The heat pump can be easily and intuitively controlled. The clear text notifications are easy to understand. If the heat pump is combined with a centralized Vitovent 300-W or 300-F home ventilation system, the two systems can both be controlled using the Vitotronic 200 control. And with the Vitoconnect Internet interface and the free ViCare app, they can even be controlled with a smartphone. Furthermore, the homeowner can authorize a specialist company to monitor the system with the Vitoguide software tool.
Easy assembly without any special proof of competence
The compact, wall-mounted internal unit contains the entire hydraulic system and the control. Owing to the large number of preinstalled components, the Vitocal 200-A can be installed easily and in a very short time. The interior unit runs especially quietly and can therefore even be mounted in the direct vicinity of living quarters without causing any problems. Since the connecting pipes to the exterior unit are filled with water, no proof of competence for refrigerants (”Kälteschein”) is required.
Advantages for trade partners
-Easy, quick installation of the internal unit thanks to many preinstalled components
-All service-relevant components easily accessible from the front for easy service
-No special proof of competence (”Kälteschein”) required for installation because connecting pipes are filled with water
-No minimum clearance between internal and external unit necessary
-Especially quiet operation easily meets all legal noise requirements (TA Lärm)
-Can even be used in townhouse complexes thanks to Advanced Acoustic Design (AAD)
-Robust and long-lasting thanks to high-quality components made in Germany
Advantages for users
-Especially quiet thanks to Advanced Acoustic Design (AAD)
-Heating and cooling with a single unit thanks to reverse operation
-Low operating costs thanks to high level of efficiency when heating and cooling
-High product qualityand moderndesign
-Easy-to-useVitotroniccontrol with clear text and graphic display
-Centralized control for monitoring Vitovent 300-W and 300-F ventilation units on theVitotronic 200 heat pump control
-No requirement for refrigeration system inspection thanks to prefabrication by the manufacturer
-Readytouse self-generated electricity, for example,from photovoltaic systems
-Web-enabled by way of free ViCare app and Vitoconnect (optional)
-Meets the requirements of many state subsidy programs
Technical data
-Heat output: 4 to 12 kW(at A-7/W35°C)
-Cooling capacity: 3 to 9 kW (at A35/W18°C)
-COP in accordance with EN 14511: up to 4.0at A2/W35°C,
up to 5.1at A7/W35°Cat A7/W35°C
-EER (Energy EfficiencyRatio): up to 4.0 at A35/W18°C
-Flow temperatures: to 60°C (heating), 18°C (cooling with floor heating) or 7°C (cooling with fan coil unit)
-Energy efficiency class: A++
Delivery date
The new Vitocal 200-A monoblock air/water heat pumpwill be available starting in April 2017.
Vitocal 060-A: hot water heat pump for efficient DHW generation
Heat domestic water efficiently and affordably with the newVitocal 060-A hot water heat pump. It is suitable for new and existing buildings alike, and ideal for applications where the ambient air is to be cooled, such as in a food storeroom or a wine cellar.
A choice ofusing recirculating air or outside air
As a recirculating air heat pump, the Vitocal 060-A uses the air directly from the room in which it is installed. Heat is taken from the ambient air and brought to a higher temperature by the heat pump to heat the water in the cylinder up to as much as 62degreesCelsius. Cooling the ambient air also reduces its level of humidity, which protects the building fabric and enhances the quality of the indoor environment.
With the outside air adapter, the heat pump can easily be converted to outside air operation. This can be necessary especially to keep it from cooling off new buildings with good thermal insulation. The heat pump works efficiently up to an outside air temperature of minus 5degrees Celsius.
Equipment configurations
This compact unit is equipped with all the components needed for efficient DHW generation. The heat pump module, 250-liter DHW cylinder, and the control are all accommodated in a space-saving casing. As an option, the heat pump can be supplied with a dry connected immersion heater and an integral coiled tube heat exchanger for connecting an external heat generator. This enables the water to be heated with electricity from a photovoltaic system for instance, with the heat from the boiler, or with solar power.
Heat pump can run on electricity from photovoltaic systems
The new hot water heat pump is equipped to be integrated into an intelligent electricity network (smart grid ready) and to run on self-generated electricity from a photovoltaic system. This means a maximum of self-generated electricity can be used and the need to buy electricity from the gridis considerably reduced.
Variable control
The Vitocal 060-A is fully operational when delivered. The basic settings on the control can easily be changed using the integrated control element and adjusted to suit the individual needs of the user. Thus, there are various heating programs available for efficient DHW generation.
Advantages for trade partners
-Easy to install hot water heat pump for outside and recirculating air operation
-Additional heat exchanger for connecting an external heat generator or solar collectors
-Easy and quick start-up thanks to preinstalled unit and preset control
-Smart grid ready
Advantages for users
-Low operating costs thanks to high level of efficiency in outside and recirculating air operation
-High water temperatures up to 62°C (at air temperatures above minus 5°C)
-Low-noise operation
-Easy to use, intuitive control
-Fast heat-up function (boost) with immersion heater
-Ready to use self-generated electricity, for example, from photovoltaic systems
Technical data
-Output: 1.3 kW
-Capacity: 250 L
-Depth x width x height: 734 x 631 x 1755 mm
-Electrical power consumption: 425 W
-Coefficient of performance (COP) in accordance with EN 16147: 3.1 (A15/W10-55°C)
-Energy efficiency class: A
Delivery date
The newVitocal 060-A hot water heat pump will be available starting in August 2017.
Vitocal 350-HT Pro: innovative high-temperature heat pump for using waste heat
In industry and commerce, the environmentally compatible recovery of unused waste heat from processes holds great potential for saving energy and CO2. Up to 140 terawatt-hours of waste heat could be recovered each year from industrial processes in Germany. This could supply around seven million households with heat. Viessmann has designed the Vitocal 350-HT Pro heat pumpto make use of this energy.
The Vitocal 350-HT Pro produces flow temperatures of up to 90degrees Celsius at heat source temperatures of up to 50degrees Celsius. This makes it suitable for the simultaneous utilization of waste heat and generation of process heat (heat transformer). Another efficient application is to use it to offset line loss in older local heating networks. For this purpose, the temperature is raised with the Vitocal 350-HT Pro longitudinally along the network.
Climate-friendly refrigerant that does not harm the ozone layer
With the new R1234ze HFO refrigerant, the mass-produced heat pump already meets the climate requirements that will apply starting in 2020. R1234ze has a global warming potential (GWP) of only six, making it especially climate-friendly compared to conventional refrigerants with a GWP of 1000, and does not harm the atmosphere’s protective layer of ozone.